All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Mike Rapoport <mike@compulab.co.il>, Liam Girdwood <lrg@ti.com>,
	linux-kernel@vger.kernel.org
Subject: [RFC/RFT][PATCH 4/4] regulator: tps6586x: Use activate_[reg|bit] with regmap based voltage_sel operations
Date: Thu, 13 Dec 2012 16:48:24 +0800	[thread overview]
Message-ID: <1355388504.31434.8.camel@phoenix> (raw)
In-Reply-To: <1355388248.31434.3.camel@phoenix>

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/tps6586x-regulator.c |   54 ++++++--------------------------
 1 file changed, 10 insertions(+), 44 deletions(-)

diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index f86da67..1b5e8b9 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -61,10 +61,6 @@ struct tps6586x_regulator {
 
 	int enable_bit[2];
 	int enable_reg[2];
-
-	/* for DVM regulators */
-	int go_reg;
-	int go_bit;
 };
 
 static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
@@ -72,37 +68,10 @@ static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
 	return rdev_get_dev(rdev)->parent;
 }
 
-static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
-				    unsigned selector)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-	int ret, val, rid = rdev_get_id(rdev);
-	uint8_t mask;
-
-	val = selector << (ffs(rdev->desc->vsel_mask) - 1);
-	mask = rdev->desc->vsel_mask;
-
-	ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask);
-	if (ret)
-		return ret;
-
-	/* Update go bit for DVM regulators */
-	switch (rid) {
-	case TPS6586X_ID_LDO_2:
-	case TPS6586X_ID_LDO_4:
-	case TPS6586X_ID_SM_0:
-	case TPS6586X_ID_SM_1:
-		ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
-		break;
-	}
-	return ret;
-}
-
 static struct regulator_ops tps6586x_regulator_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_sel = tps6586x_set_voltage_sel,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = regulator_enable_regmap,
@@ -142,7 +111,7 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 };
 
 #define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1)			\
+			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)	\
 	.desc	= {							\
 		.supply_name = _pin_name,				\
 		.name	= "REG-" #_id,					\
@@ -156,29 +125,26 @@ static const unsigned int tps6586x_dvm_voltages[] = {
 		.enable_mask = 1 << (ebit0),				\
 		.vsel_reg = TPS6586X_##vreg,				\
 		.vsel_mask = ((1 << (nbits)) - 1) << (shift),		\
+		.activate_reg = (goreg),				\
+		.activate_bit = (gobit),				\
 	},								\
 	.enable_reg[0]	= TPS6586X_SUPPLY##ereg0,			\
 	.enable_bit[0]	= (ebit0),					\
 	.enable_reg[1]	= TPS6586X_SUPPLY##ereg1,			\
 	.enable_bit[1]	= (ebit1),
 
-#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
-	.go_reg = TPS6586X_##goreg,					\
-	.go_bit = (gobit),
-
 #define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits,		\
 		     ereg0, ebit0, ereg1, ebit1)			\
 {									\
 	TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1)			\
+			   ereg0, ebit0, ereg1, ebit1, 0, 0)		\
 }
 
 #define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits,		\
 		     ereg0, ebit0, ereg1, ebit1, goreg, gobit)		\
 {									\
 	TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits,	\
-			   ereg0, ebit0, ereg1, ebit1)			\
-	TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit)			\
+			   ereg0, ebit0, ereg1, ebit1, goreg, gobit)	\
 }
 
 #define TPS6586X_SYS_REGULATOR()					\
@@ -207,13 +173,13 @@ static struct tps6586x_regulator tps6586x_regulator[] = {
 	TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
 
 	TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3,
-					ENB, 3, VCC2, 6),
+					ENB, 3, TPS6586X_VCC2, BIT(6)),
 	TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3,
-					END, 3, VCC1, 6),
+					END, 3, TPS6586X_VCC1, BIT(6)),
 	TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1,
-					ENB, 1, VCC1, 2),
+					ENB, 1, TPS6586X_VCC1, BIT(2)),
 	TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0,
-					ENB, 0, VCC1, 0),
+					ENB, 0, TPS6586X_VCC1, BIT(0)),
 };
 
 /*
-- 
1.7.9.5




  parent reply	other threads:[~2012-12-13  8:48 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-13  8:44 [RFC/RFT][PATCH 1/4] regulator: core: Allow specify activate_[reg|bit] for regmap based voltage_sel operations Axel Lin
2012-12-13  8:45 ` [RFC/RFT][PATCH 2/4] regulator: 88pm8607: Use activate_[reg|bit] with " Axel Lin
2012-12-13  8:47 ` [RFC/RFT][PATCH 3/4] regulator: da9052: " Axel Lin
2012-12-13  8:48 ` Axel Lin [this message]
2012-12-13  8:48 ` [RFC/RFT][PATCH 1/4] regulator: core: Allow specify activate_[reg|bit] for " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1355388504.31434.8.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=mike@compulab.co.il \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.