[PATCH 0/9] tx/rx LED trigger support

[Fabio Baltieri <fabio.baltieri@gmail.com>]

Hi all,

this is a resend of the patch series on tx/rx LEDs trigger.  The patch
set was put on hold after the latest discussions on Kurt's rename patch
due to a missing feature in the LED subsystem, which has been just
merged in:

a8df7b1 leds: add led_trigger_rename function

So, as months passed since the latest developments, I'm reposting the
whole set, rebased on current mainline.  The first patches are the same
that were merged in can-next/led-trigger, but there was some (trivial)
conflict in the rebase.

As for the test, I've tried the patch on the current mainline kernel
with my custom usb-can interface.  For the drivers, I don't have any
SoC-enabled board anymore, so they have only been compile tested.

Cheers,
Fabio


Fabio Baltieri (7):
  can: add tx/rx LED trigger support
  can: flexcan: add LED trigger support
  can: at91_can: add LED trigger support
  can: ti_hecc: add LED trigger support
  can: c_can: add LED trigger support
  can: mcp251x: add LED trigger support
  can: sja1000: add LED trigger support

Kurt Van Dijck (2):
  can: export a safe netdev_priv wrapper for candev
  can: rename LED trigger name on netdev renames

 drivers/net/can/Kconfig           |  12 ++++
 drivers/net/can/Makefile          |   2 +
 drivers/net/can/at91_can.c        |  10 +++
 drivers/net/can/c_can/c_can.c     |  10 +++
 drivers/net/can/dev.c             |  18 ++++++
 drivers/net/can/flexcan.c         |  11 ++++
 drivers/net/can/led.c             | 129 ++++++++++++++++++++++++++++++++++++++
 drivers/net/can/mcp251x.c         |  23 +++++--
 drivers/net/can/sja1000/sja1000.c |  17 ++++-
 drivers/net/can/ti_hecc.c         |  10 +++
 include/linux/can/dev.h           |  11 ++++
 include/linux/can/led.h           |  51 +++++++++++++++
 12 files changed, 299 insertions(+), 5 deletions(-)
 create mode 100644 drivers/net/can/led.c
 create mode 100644 include/linux/can/led.h

-- 
1.7.12.1