From mboxrd@z Thu Jan 1 00:00:00 1970 From: will.deacon@arm.com (Will Deacon) Date: Mon, 17 Dec 2012 16:10:42 +0000 Subject: [PATCH] ARM: cache: flush to LoUU instead of LoUIS on uniprocessor CPUs Message-ID: <1355760642-28559-1-git-send-email-will.deacon@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org flush_cache_louis flushes the D-side caches to the point of unification inner-shareable. On uniprocessor CPUs, this is defined as zero and therefore no flushing will take place. Rather than invent a new interface for UP systems, instead use our SMP_ON_UP patching code to read the LoUU from the CLIDR instead. Cc: Lorenzo Pieralisi Tested-by: Guennadi Liakhovetski Signed-off-by: Will Deacon --- arch/arm/mm/cache-v7.S | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index cd95664..7539ec2 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -44,8 +44,10 @@ ENDPROC(v7_flush_icache_all) ENTRY(v7_flush_dcache_louis) dmb @ ensure ordering with previous memory accesses mrc p15, 1, r0, c0, c0, 1 @ read clidr, r0 = clidr - ands r3, r0, #0xe00000 @ extract LoUIS from clidr - mov r3, r3, lsr #20 @ r3 = LoUIS * 2 + ALT_SMP(ands r3, r0, #(7 << 21)) @ extract LoUIS from clidr + ALT_UP(ands r3, r0, #(7 << 27)) @ extract LoUU from clidr + ALT_SMP(mov r3, r3, lsr #20) @ r3 = LoUIS * 2 + ALT_UP(mov r3, r3, lsr #26) @ r3 = LoUU * 2 moveq pc, lr @ return if level == 0 mov r10, #0 @ r10 (starting level) = 0 b flush_levels @ start flushing cache levels -- 1.8.0