From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavan Date: Wed, 19 Dec 2012 06:07:48 -0800 (PST) Subject: [U-Boot] configuring u-boot for custom board based on beaglebone(am335xx_evm) Message-ID: <1355926068705-143228.post@n7.nabble.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, i need to configure u-boot-2013.01.rc2 for my custom board, that is completely based on beaglebone Rev A3,i have mux.h file according to my hardware i am not understanding the codeflow of beaglebone for include the mux.h. i have some extra hardware on my board,but first i need to understand the codeflow for beaglebone then only i can change the all required files according to my hardware. Can you please tell me which are the files i need to change? or u-boot is using pin-mux for baglebone? I checked the file include/configs/am335x_evm.h and also in board/ti/am335x directory the mux.c is there,but i didn't understand the codeflow properly? Please help me out? Regards Pavan -- View this message in context: http://u-boot.10912.n7.nabble.com/configuring-u-boot-for-custom-board-based-on-beaglebone-am335xx-evm-tp143228.html Sent from the U-Boot mailing list archive at Nabble.com.