[PATCH RFT] ASoC: sta529: Fix update register bits in sta529_set_dai_fmt

[Axel Lin <axel.lin@ingics.com>]

Both the mask and mode settings are wrong in current code.

According to the datasheet:

S2PCFG0 (0x0A)
BIT[3:1] DATA_FORMAT
        serial interface protocol format:
        000: left Justified
        001: I2S (default)
        010: right justified
        100: PCM no delay
        101: PCM delay
        111: DSP

Thus fixes the defines for LEFT_J_DATA_FORMAT, I2S_DATA_FORMAT, and
RIGHT_J_DATA_FORMAT.
Also adds define for DATA_FORMAT_MSK.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Hi Rajeev,
I don't have this hardware, can you test this patch?
Thanks,
Axel
 sound/soc/codecs/sta529.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/sta529.c b/sound/soc/codecs/sta529.c
index ab355c4..40c07be 100644
--- a/sound/soc/codecs/sta529.c
+++ b/sound/soc/codecs/sta529.c
@@ -74,9 +74,10 @@
 				SNDRV_PCM_FMTBIT_S32_LE)
 #define	S2PC_VALUE		0x98
 #define CLOCK_OUT		0x60
-#define LEFT_J_DATA_FORMAT	0x10
-#define I2S_DATA_FORMAT		0x12
-#define RIGHT_J_DATA_FORMAT	0x14
+#define DATA_FORMAT_MSK		0x0E
+#define LEFT_J_DATA_FORMAT	0x00
+#define I2S_DATA_FORMAT		0x02
+#define RIGHT_J_DATA_FORMAT	0x04
 #define CODEC_MUTE_VAL		0x80
 
 #define POWER_CNTLMSAK		0x40
@@ -289,7 +290,7 @@ static int sta529_set_dai_fmt(struct snd_soc_dai *codec_dai, u32 fmt)
 		return -EINVAL;
 	}
 
-	snd_soc_update_bits(codec, STA529_S2PCFG0, 0x0D, mode);
+	snd_soc_update_bits(codec, STA529_S2PCFG0, DATA_FORMAT_MSK, mode);
 
 	return 0;
 }
-- 
1.7.9.5