All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>,
	Liam Girdwood <lrg@ti.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] regulator: max8997: Convert max8997_safeout_ops to set_voltage_sel and list_voltage_table
Date: Wed, 26 Dec 2012 16:30:44 +0800	[thread overview]
Message-ID: <1356510644.16892.5.camel@phoenix> (raw)
In-Reply-To: <1356510519.16892.3.camel@phoenix>

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/max8997.c |   76 ++++++++++---------------------------------
 1 file changed, 18 insertions(+), 58 deletions(-)

diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c
index 57e8907..c30424a 100644
--- a/drivers/regulator/max8997.c
+++ b/drivers/regulator/max8997.c
@@ -54,6 +54,13 @@ struct max8997_data {
 	u8 saved_states[MAX8997_REG_MAX];
 };
 
+static const unsigned int safeoutvolt[] = {
+	4850000,
+	4900000,
+	4950000,
+	3300000,
+};
+
 static inline void max8997_set_gpio(struct max8997_data *max8997)
 {
 	int set3 = (max8997->buck125_gpioindex) & 0x1;
@@ -130,29 +137,6 @@ static const struct voltage_map_desc *reg_voltage_map[] = {
 	[MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc,
 };
 
-static int max8997_list_voltage_safeout(struct regulator_dev *rdev,
-		unsigned int selector)
-{
-	int rid = rdev_get_id(rdev);
-
-	if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) {
-		switch (selector) {
-		case 0:
-			return 4850000;
-		case 1:
-			return 4900000;
-		case 2:
-			return 4950000;
-		case 3:
-			return 3300000;
-		default:
-			return -EINVAL;
-		}
-	}
-
-	return -EINVAL;
-}
-
 static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev,
 		unsigned int selector)
 {
@@ -722,49 +706,23 @@ out:
 	return 0;
 }
 
-static const int safeoutvolt[] = {
-	3300000,
-	4850000,
-	4900000,
-	4950000,
-};
-
 /* For SAFEOUT1 and SAFEOUT2 */
-static int max8997_set_voltage_safeout(struct regulator_dev *rdev,
-		int min_uV, int max_uV, unsigned *selector)
+static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev,
+					   unsigned selector)
 {
 	struct max8997_data *max8997 = rdev_get_drvdata(rdev);
 	struct i2c_client *i2c = max8997->iodev->i2c;
 	int rid = rdev_get_id(rdev);
 	int reg, shift = 0, mask, ret;
-	int i = 0;
-	u8 val;
 
 	if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2)
 		return -EINVAL;
 
-	for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) {
-		if (min_uV <= safeoutvolt[i] &&
-				max_uV >= safeoutvolt[i])
-			break;
-	}
-
-	if (i >= ARRAY_SIZE(safeoutvolt))
-		return -EINVAL;
-
-	if (i == 0)
-		val = 0x3;
-	else
-		val = i - 1;
-
 	ret = max8997_get_voltage_register(rdev, &reg, &shift, &mask);
 	if (ret)
 		return ret;
 
-	ret = max8997_update_reg(i2c, reg, val << shift, mask << shift);
-	*selector = val;
-
-	return ret;
+	return max8997_update_reg(i2c, reg, selector << shift, mask << shift);
 }
 
 static int max8997_reg_disable_suspend(struct regulator_dev *rdev)
@@ -824,12 +782,12 @@ static struct regulator_ops max8997_fixedvolt_ops = {
 };
 
 static struct regulator_ops max8997_safeout_ops = {
-	.list_voltage		= max8997_list_voltage_safeout,
+	.list_voltage		= regulator_list_voltage_table,
 	.is_enabled		= max8997_reg_is_enabled,
 	.enable			= max8997_reg_enable,
 	.disable		= max8997_reg_disable,
 	.get_voltage_sel	= max8997_get_voltage_sel,
-	.set_voltage		= max8997_set_voltage_safeout,
+	.set_voltage_sel	= max8997_set_voltage_safeout_sel,
 	.set_suspend_disable	= max8997_reg_disable_suspend,
 };
 
@@ -1235,13 +1193,15 @@ static int max8997_pmic_probe(struct platform_device *pdev)
 		int id = pdata->regulators[i].id;
 
 		desc = reg_voltage_map[id];
-		if (desc)
+		if (desc) {
 			regulators[id].n_voltages =
 				(desc->max - desc->min) / desc->step + 1;
-		else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2)
-			regulators[id].n_voltages = 4;
-		else if (id == MAX8997_CHARGER_CV)
+		} else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) {
+			regulators[id].volt_table = safeoutvolt;
+			regulators[id].n_voltages = ARRAY_SIZE(safeoutvolt);
+		} else if (id == MAX8997_CHARGER_CV) {
 			regulators[id].n_voltages = 16;
+		}
 
 		config.dev = max8997->dev;
 		config.init_data = pdata->regulators[i].initdata;
-- 
1.7.9.5




  reply	other threads:[~2012-12-26  8:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-26  8:28 [PATCH 1/2] regulator: max8997: Remove set_voltage_time_sel setting for max8997_ldo_ops Axel Lin
2012-12-26  8:30 ` Axel Lin [this message]
2012-12-27 17:35 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1356510644.16892.5.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=thomas.abraham@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.