From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Sangbeom Kim <sbkim73@samsung.com>,
Inderpal Singh <inderpal.singh@linaro.org>,
Amit Daniel Kachhap <amit.daniel@samsung.com>,
Liam Girdwood <lrg@ti.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFT] regulator: s5m8767: Convert to regulator_[get|set]_voltage_sel_regmap
Date: Sat, 29 Dec 2012 00:58:21 +0800 [thread overview]
Message-ID: <1356713901.15120.2.camel@phoenix> (raw)
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/s5m8767.c | 50 +++++++++++--------------------------------
1 file changed, 12 insertions(+), 38 deletions(-)
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 33b65c9..eeadf58 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -255,10 +255,8 @@ static int s5m8767_reg_disable(struct regulator_dev *rdev)
return sec_reg_update(s5m8767->iodev, reg, ~mask, mask);
}
-static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
+static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767)
{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg_id = rdev_get_id(rdev);
int reg;
switch (reg_id) {
@@ -296,31 +294,7 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg)
return -EINVAL;
}
- *_reg = reg;
-
- return 0;
-}
-
-static int s5m8767_get_voltage_sel(struct regulator_dev *rdev)
-{
- struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
- int reg, mask, ret;
- int reg_id = rdev_get_id(rdev);
- unsigned int val;
-
- ret = s5m8767_get_voltage_register(rdev, ®);
- if (ret)
- return ret;
-
- mask = (reg_id < S5M8767_BUCK1) ? 0x3f : 0xff;
-
- ret = sec_reg_read(s5m8767->iodev, reg, &val);
- if (ret)
- return ret;
-
- val &= mask;
-
- return val;
+ return reg;
}
static int s5m8767_convert_voltage_to_sel(
@@ -373,15 +347,13 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
{
struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev);
int reg_id = rdev_get_id(rdev);
- int reg, mask, ret = 0, old_index, index = 0;
+ int old_index, index = 0;
u8 *buck234_vol = NULL;
switch (reg_id) {
case S5M8767_LDO1 ... S5M8767_LDO28:
- mask = 0x3f;
break;
case S5M8767_BUCK1 ... S5M8767_BUCK6:
- mask = 0xff;
if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs)
buck234_vol = &s5m8767->buck2_vol[0];
else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs)
@@ -392,7 +364,6 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
case S5M8767_BUCK7 ... S5M8767_BUCK8:
return -EINVAL;
case S5M8767_BUCK9:
- mask = 0xff;
break;
default:
return -EINVAL;
@@ -412,11 +383,7 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev,
else
return s5m8767_set_low(s5m8767);
} else {
- ret = s5m8767_get_voltage_register(rdev, ®);
- if (ret)
- return ret;
-
- return sec_reg_update(s5m8767->iodev, reg, selector, mask);
+ return regulator_set_voltage_sel_regmap(rdev, selector);
}
}
@@ -441,7 +408,7 @@ static struct regulator_ops s5m8767_ops = {
.is_enabled = s5m8767_reg_is_enabled,
.enable = s5m8767_reg_enable,
.disable = s5m8767_reg_disable,
- .get_voltage_sel = s5m8767_get_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = s5m8767_set_voltage_sel,
.set_voltage_time_sel = s5m8767_set_voltage_time_sel,
};
@@ -760,11 +727,18 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
(desc->max - desc->min) / desc->step + 1;
regulators[id].min_uV = desc->min;
regulators[id].uV_step = desc->step;
+ regulators[id].vsel_reg =
+ s5m8767_get_vsel_reg(id, s5m8767);
+ if (id < S5M8767_BUCK1)
+ regulators[id].vsel_mask = 0x3f;
+ else
+ regulators[id].vsel_mask = 0xff;
}
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s5m8767;
+ config.regmap = iodev->regmap;
rdev[i] = regulator_register(®ulators[id], &config);
if (IS_ERR(rdev[i])) {
--
1.7.9.5
next reply other threads:[~2012-12-28 16:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-28 16:58 Axel Lin [this message]
2013-01-08 11:12 ` [PATCH RFT] regulator: s5m8767: Convert to regulator_[get|set]_voltage_sel_regmap Mark Brown
[not found] ` <CAFRkauA6YeFod5Yw0AikmhbyL4vcN2tFSs8ba48P4A8OeJd58g@mail.gmail.com>
2013-01-08 13:13 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1356713901.15120.2.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=amit.daniel@samsung.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=inderpal.singh@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=sbkim73@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.