From: "Hervé Poussineau" <hpoussin@reactos.org>
To: qemu-devel@nongnu.org
Cc: "Andreas Färber" <andreas.faerber@web.de>,
"Gerd Hoffmann" <kraxel@redhat.com>
Subject: [Qemu-devel] [PATCH 03/10] uhci: stop using portio lists
Date: Fri, 4 Jan 2013 22:29:38 +0100 [thread overview]
Message-ID: <1357334986-13941-4-git-send-email-hpoussin@reactos.org> (raw)
In-Reply-To: <1357334986-13941-1-git-send-email-hpoussin@reactos.org>
From: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
---
hw/usb/hcd-uhci.c | 106 +++++++++++++++--------------------------------------
trace-events | 2 -
2 files changed, 30 insertions(+), 78 deletions(-)
diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index 2af754b..528d23f 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -455,40 +455,11 @@ static const VMStateDescription vmstate_uhci = {
}
};
-static void uhci_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
+static void uhci_port_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
{
UHCIState *s = opaque;
- addr &= 0x1f;
- switch(addr) {
- case 0x0c:
- s->sof_timing = val;
- break;
- }
-}
-
-static uint32_t uhci_ioport_readb(void *opaque, uint32_t addr)
-{
- UHCIState *s = opaque;
- uint32_t val;
-
- addr &= 0x1f;
- switch(addr) {
- case 0x0c:
- val = s->sof_timing;
- break;
- default:
- val = 0xff;
- break;
- }
- return val;
-}
-
-static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
-{
- UHCIState *s = opaque;
-
- addr &= 0x1f;
trace_usb_uhci_mmio_writew(addr, val);
switch(addr) {
@@ -537,6 +508,17 @@ static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
if (s->status & UHCI_STS_HCHALTED)
s->frnum = val & 0x7ff;
break;
+ case 0x08:
+ s->fl_base_addr &= 0xffff0000;
+ s->fl_base_addr |= val & ~0xfff;
+ break;
+ case 0x0a:
+ s->fl_base_addr &= 0x0000ffff;
+ s->fl_base_addr |= (val << 16);
+ break;
+ case 0x0c:
+ s->sof_timing = val & 0xff;
+ break;
case 0x10 ... 0x1f:
{
UHCIPort *port;
@@ -568,12 +550,11 @@ static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
}
}
-static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
+static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size)
{
UHCIState *s = opaque;
uint32_t val;
- addr &= 0x1f;
switch(addr) {
case 0x00:
val = s->cmd;
@@ -587,6 +568,15 @@ static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
case 0x06:
val = s->frnum;
break;
+ case 0x08:
+ val = s->fl_base_addr & 0xffff;
+ break;
+ case 0x0a:
+ val = (s->fl_base_addr >> 16) & 0xffff;
+ break;
+ case 0x0c:
+ val = s->sof_timing;
+ break;
case 0x10 ... 0x1f:
{
UHCIPort *port;
@@ -609,38 +599,6 @@ static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
return val;
}
-static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
-{
- UHCIState *s = opaque;
-
- addr &= 0x1f;
- trace_usb_uhci_mmio_writel(addr, val);
-
- switch(addr) {
- case 0x08:
- s->fl_base_addr = val & ~0xfff;
- break;
- }
-}
-
-static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr)
-{
- UHCIState *s = opaque;
- uint32_t val;
-
- addr &= 0x1f;
- switch(addr) {
- case 0x08:
- val = s->fl_base_addr;
- break;
- default:
- val = 0xffffffff;
- break;
- }
- trace_usb_uhci_mmio_readl(addr, val);
- return val;
-}
-
/* signal resume if controller suspended */
static void uhci_resume (void *opaque)
{
@@ -1213,18 +1171,14 @@ static void uhci_frame_timer(void *opaque)
qemu_mod_timer(s->frame_timer, s->expire_time);
}
-static const MemoryRegionPortio uhci_portio[] = {
- { 0, 32, 2, .write = uhci_ioport_writew, },
- { 0, 32, 2, .read = uhci_ioport_readw, },
- { 0, 32, 4, .write = uhci_ioport_writel, },
- { 0, 32, 4, .read = uhci_ioport_readl, },
- { 0, 32, 1, .write = uhci_ioport_writeb, },
- { 0, 32, 1, .read = uhci_ioport_readb, },
- PORTIO_END_OF_LIST()
-};
-
static const MemoryRegionOps uhci_ioport_ops = {
- .old_portio = uhci_portio,
+ .read = uhci_port_read,
+ .write = uhci_port_write,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 2,
+ .impl.max_access_size = 2,
+ .endianness = DEVICE_LITTLE_ENDIAN,
};
static USBPortOps uhci_port_ops = {
diff --git a/trace-events b/trace-events
index 4023a4c..2183183 100644
--- a/trace-events
+++ b/trace-events
@@ -307,8 +307,6 @@ usb_uhci_frame_loop_stop_idle(void) ""
usb_uhci_frame_loop_continue(void) ""
usb_uhci_mmio_readw(uint32_t addr, uint32_t val) "addr 0x%04x, ret 0x%04x"
usb_uhci_mmio_writew(uint32_t addr, uint32_t val) "addr 0x%04x, val 0x%04x"
-usb_uhci_mmio_readl(uint32_t addr, uint32_t val) "addr 0x%04x, ret 0x%08x"
-usb_uhci_mmio_writel(uint32_t addr, uint32_t val) "addr 0x%04x, val 0x%08x"
usb_uhci_queue_add(uint32_t token) "token 0x%x"
usb_uhci_queue_del(uint32_t token, const char *reason) "token 0x%x: %s"
usb_uhci_packet_add(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
--
1.7.10.4
next prev parent reply other threads:[~2013-01-04 21:29 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-04 21:29 [Qemu-devel] [PATCH 00/10] memory: remove old_portio usage Hervé Poussineau
2013-01-04 21:29 ` [Qemu-devel] [PATCH 01/10] ppc/newworld: add ISA bus, required by VGA card Hervé Poussineau
2013-01-12 16:03 ` Andreas Färber
2013-01-04 21:29 ` [Qemu-devel] [PATCH 02/10] ppc/oldworld: " Hervé Poussineau
2013-01-04 21:29 ` Hervé Poussineau [this message]
2013-01-10 17:18 ` [Qemu-devel] [PATCH 03/10] uhci: stop using portio lists Andreas Färber
2013-01-11 7:38 ` Gerd Hoffmann
2013-01-04 21:29 ` [Qemu-devel] [PATCH 04/10] sun4u: create VGA card after ISA bus Hervé Poussineau
2013-01-10 17:24 ` Andreas Färber
2013-01-10 19:30 ` Hervé Poussineau
2013-01-12 11:42 ` Blue Swirl
2013-01-12 15:58 ` Andreas Färber
2013-01-04 21:29 ` [Qemu-devel] [PATCH 05/10] xen_platform: do not use old_portio-style callbacks Hervé Poussineau
2013-01-04 21:29 ` Hervé Poussineau
2013-01-12 16:06 ` [Qemu-devel] " Andreas Färber
2013-01-12 16:06 ` Andreas Färber
2013-01-15 17:09 ` [Qemu-devel] " Andreas Färber
2013-01-15 17:09 ` Andreas Färber
2013-01-15 17:43 ` [Qemu-devel] " Stefano Stabellini
2013-01-15 17:43 ` Stefano Stabellini
2013-01-04 21:29 ` [Qemu-devel] [PATCH 06/10] acpi-piix4: " Hervé Poussineau
2013-01-12 16:20 ` Andreas Färber
2013-01-12 18:02 ` Andreas Färber
2013-01-12 19:20 ` Hervé Poussineau
2013-01-04 21:29 ` [Qemu-devel] [PATCH 07/10] vga/qxl: do not use portio_list_init/portio_list_add Hervé Poussineau
2013-01-04 21:29 ` [Qemu-devel] [PATCH 08/10] isa: use memory regions instead of portio_list_* functions Hervé Poussineau
2013-01-12 19:21 ` Andreas Färber
2013-01-04 21:29 ` [Qemu-devel] [PATCH 09/10] ioport: remove now useless " Hervé Poussineau
2013-01-04 21:29 ` [Qemu-devel] [PATCH 10/10] memory: remove old_portio-style callbacks support Hervé Poussineau
2013-01-10 17:45 ` Andreas Färber
2013-01-10 19:33 ` Hervé Poussineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1357334986-13941-4-git-send-email-hpoussin@reactos.org \
--to=hpoussin@reactos.org \
--cc=andreas.faerber@web.de \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.