[PATCH 5/5] iio:light:tsl2563 move out of staging

[Jonathan Cameron <jic23@kernel.org>]

This driver is simple, uses the latest interfaces and contains few if
any controversial elements.  All of its interfaces have been in place
for a long time now.  Hence let's move it out of staging.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
---
 drivers/iio/light/Kconfig             |  10 +
 drivers/iio/light/Makefile            |   1 +
 drivers/iio/light/tsl2563.c           | 887 ++++++++++++++++++++++++++++++++++
 drivers/staging/iio/light/Kconfig     |  10 -
 drivers/staging/iio/light/Makefile    |   1 -
 drivers/staging/iio/light/tsl2563.c   | 887 ----------------------------------
 drivers/staging/iio/light/tsl2563.h   |   9 -
 include/linux/platform_data/tsl2563.h |   9 +
 8 files changed, 907 insertions(+), 907 deletions(-)

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index dbf80ab..5ef1a39 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -32,6 +32,16 @@ config SENSORS_LM3533
 	  changes. The ALS-control output values can be set per zone for the
 	  three current output channels.
 
+config SENSORS_TSL2563
+	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
+	depends on I2C
+	help
+	 If you say yes here you get support for the Taos TSL2560,
+	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
+
+	 This driver can also be built as a module.  If so, the module
+	 will be called tsl2563.
+
 config VCNL4000
 	tristate "VCNL4000 combined ALS and proximity sensor"
 	depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 21a8f0d..040d9c7 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -4,5 +4,6 @@
 
 obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
+obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_VCNL4000)		+= vcnl4000.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
diff --git a/drivers/iio/light/tsl2563.c b/drivers/iio/light/tsl2563.c
new file mode 100644
index 0000000..86bcadc
--- /dev/null
+++ b/drivers/iio/light/tsl2563.c
@@ -0,0 +1,887 @@
+/*
+ * drivers/i2c/chips/tsl2563.c
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
+ * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * Converted to IIO driver
+ * Amit Kucheria <amit.kucheria@verdurent.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/platform_data/tsl2563.h>
+
+/* Use this many bits for fraction part. */
+#define ADC_FRAC_BITS		14
+
+/* Given number of 1/10000's in ADC_FRAC_BITS precision. */
+#define FRAC10K(f)		(((f) * (1L << (ADC_FRAC_BITS))) / (10000))
+
+/* Bits used for fraction in calibration coefficients.*/
+#define CALIB_FRAC_BITS		10
+/* 0.5 in CALIB_FRAC_BITS precision */
+#define CALIB_FRAC_HALF		(1 << (CALIB_FRAC_BITS - 1))
+/* Make a fraction from a number n that was multiplied with b. */
+#define CALIB_FRAC(n, b)	(((n) << CALIB_FRAC_BITS) / (b))
+/* Decimal 10^(digits in sysfs presentation) */
+#define CALIB_BASE_SYSFS	1000
+
+#define TSL2563_CMD		0x80
+#define TSL2563_CLEARINT	0x40
+
+#define TSL2563_REG_CTRL	0x00
+#define TSL2563_REG_TIMING	0x01
+#define TSL2563_REG_LOWLOW	0x02 /* data0 low threshold, 2 bytes */
+#define TSL2563_REG_LOWHIGH	0x03
+#define TSL2563_REG_HIGHLOW	0x04 /* data0 high threshold, 2 bytes */
+#define TSL2563_REG_HIGHHIGH	0x05
+#define TSL2563_REG_INT		0x06
+#define TSL2563_REG_ID		0x0a
+#define TSL2563_REG_DATA0LOW	0x0c /* broadband sensor value, 2 bytes */
+#define TSL2563_REG_DATA0HIGH	0x0d
+#define TSL2563_REG_DATA1LOW	0x0e /* infrared sensor value, 2 bytes */
+#define TSL2563_REG_DATA1HIGH	0x0f
+
+#define TSL2563_CMD_POWER_ON	0x03
+#define TSL2563_CMD_POWER_OFF	0x00
+#define TSL2563_CTRL_POWER_MASK	0x03
+
+#define TSL2563_TIMING_13MS	0x00
+#define TSL2563_TIMING_100MS	0x01
+#define TSL2563_TIMING_400MS	0x02
+#define TSL2563_TIMING_MASK	0x03
+#define TSL2563_TIMING_GAIN16	0x10
+#define TSL2563_TIMING_GAIN1	0x00
+
+#define TSL2563_INT_DISBLED	0x00
+#define TSL2563_INT_LEVEL	0x10
+#define TSL2563_INT_PERSIST(n)	((n) & 0x0F)
+
+struct tsl2563_gainlevel_coeff {
+	u8 gaintime;
+	u16 min;
+	u16 max;
+};
+
+static const struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
+	{
+		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
+		.min		= 0,
+		.max		= 65534,
+	}, {
+		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
+		.min		= 2048,
+		.max		= 65534,
+	}, {
+		.gaintime	= TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
+		.min		= 4095,
+		.max		= 37177,
+	}, {
+		.gaintime	= TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
+		.min		= 3000,
+		.max		= 65535,
+	},
+};
+
+struct tsl2563_chip {
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct delayed_work	poweroff_work;
+
+	/* Remember state for suspend and resume functions */
+	bool suspended;
+
+	struct tsl2563_gainlevel_coeff const *gainlevel;
+
+	u16			low_thres;
+	u16			high_thres;
+	u8			intr;
+	bool			int_enabled;
+
+	/* Calibration coefficients */
+	u32			calib0;
+	u32			calib1;
+	int			cover_comp_gain;
+
+	/* Cache current values, to be returned while suspended */
+	u32			data0;
+	u32			data1;
+};
+
+static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
+{
+	struct i2c_client *client = chip->client;
+	u8 cmd;
+
+	cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
+	return i2c_smbus_write_byte_data(client,
+					 TSL2563_CMD | TSL2563_REG_CTRL, cmd);
+}
+
+/*
+ * Return value is 0 for off, 1 for on, or a negative error
+ * code if reading failed.
+ */
+static int tsl2563_get_power(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL);
+	if (ret < 0)
+		return ret;
+
+	return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
+}
+
+static int tsl2563_configure(struct tsl2563_chip *chip)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_TIMING,
+			chip->gainlevel->gaintime);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_HIGHLOW,
+			chip->high_thres & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_HIGHHIGH,
+			(chip->high_thres >> 8) & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_LOWLOW,
+			chip->low_thres & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_byte_data(chip->client,
+			TSL2563_CMD | TSL2563_REG_LOWHIGH,
+			(chip->low_thres >> 8) & 0xFF);
+/*
+ * Interrupt register is automatically written anyway if it is relevant
+ * so is not here.
+ */
+error_ret:
+	return ret;
+}
+
+static void tsl2563_poweroff_work(struct work_struct *work)
+{
+	struct tsl2563_chip *chip =
+		container_of(work, struct tsl2563_chip, poweroff_work.work);
+	tsl2563_set_power(chip, 0);
+}
+
+static int tsl2563_detect(struct tsl2563_chip *chip)
+{
+	int ret;
+
+	ret = tsl2563_set_power(chip, 1);
+	if (ret)
+		return ret;
+
+	ret = tsl2563_get_power(chip);
+	if (ret < 0)
+		return ret;
+
+	return ret ? 0 : -ENODEV;
+}
+
+static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
+{
+	struct i2c_client *client = chip->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID);
+	if (ret < 0)
+		return ret;
+
+	*id = ret;
+
+	return 0;
+}
+
+/*
+ * "Normalized" ADC value is one obtained with 400ms of integration time and
+ * 16x gain. This function returns the number of bits of shift needed to
+ * convert between normalized values and HW values obtained using given
+ * timing and gain settings.
+ */
+static int adc_shiftbits(u8 timing)
+{
+	int shift = 0;
+
+	switch (timing & TSL2563_TIMING_MASK) {
+	case TSL2563_TIMING_13MS:
+		shift += 5;
+		break;
+	case TSL2563_TIMING_100MS:
+		shift += 2;
+		break;
+	case TSL2563_TIMING_400MS:
+		/* no-op */
+		break;
+	}
+
+	if (!(timing & TSL2563_TIMING_GAIN16))
+		shift += 4;
+
+	return shift;
+}
+
+/* Convert a HW ADC value to normalized scale. */
+static u32 normalize_adc(u16 adc, u8 timing)
+{
+	return adc << adc_shiftbits(timing);
+}
+
+static void tsl2563_wait_adc(struct tsl2563_chip *chip)
+{
+	unsigned int delay;
+
+	switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
+	case TSL2563_TIMING_13MS:
+		delay = 14;
+		break;
+	case TSL2563_TIMING_100MS:
+		delay = 101;
+		break;
+	default:
+		delay = 402;
+	}
+	/*
+	 * TODO: Make sure that we wait at least required delay but why we
+	 * have to extend it one tick more?
+	 */
+	schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
+}
+
+static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
+{
+	struct i2c_client *client = chip->client;
+
+	if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {
+
+		(adc > chip->gainlevel->max) ?
+			chip->gainlevel++ : chip->gainlevel--;
+
+		i2c_smbus_write_byte_data(client,
+					  TSL2563_CMD | TSL2563_REG_TIMING,
+					  chip->gainlevel->gaintime);
+
+		tsl2563_wait_adc(chip);
+		tsl2563_wait_adc(chip);
+
+		return 1;
+	} else
+		return 0;
+}
+
+static int tsl2563_get_adc(struct tsl2563_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	u16 adc0, adc1;
+	int retry = 1;
+	int ret = 0;
+
+	if (chip->suspended)
+		goto out;
+
+	if (!chip->int_enabled) {
+		cancel_delayed_work(&chip->poweroff_work);
+
+		if (!tsl2563_get_power(chip)) {
+			ret = tsl2563_set_power(chip, 1);
+			if (ret)
+				goto out;
+			ret = tsl2563_configure(chip);
+			if (ret)
+				goto out;
+			tsl2563_wait_adc(chip);
+		}
+	}
+
+	while (retry) {
+		ret = i2c_smbus_read_word_data(client,
+				TSL2563_CMD | TSL2563_REG_DATA0LOW);
+		if (ret < 0)
+			goto out;
+		adc0 = ret;
+
+		ret = i2c_smbus_read_word_data(client,
+				TSL2563_CMD | TSL2563_REG_DATA1LOW);
+		if (ret < 0)
+			goto out;
+		adc1 = ret;
+
+		retry = tsl2563_adjust_gainlevel(chip, adc0);
+	}
+
+	chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
+	chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
+
+	if (!chip->int_enabled)
+		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+
+	ret = 0;
+out:
+	return ret;
+}
+
+static inline int calib_to_sysfs(u32 calib)
+{
+	return (int) (((calib * CALIB_BASE_SYSFS) +
+		       CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
+}
+
+static inline u32 calib_from_sysfs(int value)
+{
+	return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
+}
+
+/*
+ * Conversions between lux and ADC values.
+ *
+ * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
+ * appropriate constants. Different constants are needed for different
+ * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
+ * of the intensities in infrared and visible wavelengths). lux_table below
+ * lists the upper threshold of the adc1/adc0 ratio and the corresponding
+ * constants.
+ */
+
+struct tsl2563_lux_coeff {
+	unsigned long ch_ratio;
+	unsigned long ch0_coeff;
+	unsigned long ch1_coeff;
+};
+
+static const struct tsl2563_lux_coeff lux_table[] = {
+	{
+		.ch_ratio	= FRAC10K(1300),
+		.ch0_coeff	= FRAC10K(315),
+		.ch1_coeff	= FRAC10K(262),
+	}, {
+		.ch_ratio	= FRAC10K(2600),
+		.ch0_coeff	= FRAC10K(337),
+		.ch1_coeff	= FRAC10K(430),
+	}, {
+		.ch_ratio	= FRAC10K(3900),
+		.ch0_coeff	= FRAC10K(363),
+		.ch1_coeff	= FRAC10K(529),
+	}, {
+		.ch_ratio	= FRAC10K(5200),
+		.ch0_coeff	= FRAC10K(392),
+		.ch1_coeff	= FRAC10K(605),
+	}, {
+		.ch_ratio	= FRAC10K(6500),
+		.ch0_coeff	= FRAC10K(229),
+		.ch1_coeff	= FRAC10K(291),
+	}, {
+		.ch_ratio	= FRAC10K(8000),
+		.ch0_coeff	= FRAC10K(157),
+		.ch1_coeff	= FRAC10K(180),
+	}, {
+		.ch_ratio	= FRAC10K(13000),
+		.ch0_coeff	= FRAC10K(34),
+		.ch1_coeff	= FRAC10K(26),
+	}, {
+		.ch_ratio	= ULONG_MAX,
+		.ch0_coeff	= 0,
+		.ch1_coeff	= 0,
+	},
+};
+
+/* Convert normalized, scaled ADC values to lux. */
+static unsigned int adc_to_lux(u32 adc0, u32 adc1)
+{
+	const struct tsl2563_lux_coeff *lp = lux_table;
+	unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
+
+	ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;
+
+	while (lp->ch_ratio < ratio)
+		lp++;
+
+	lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;
+
+	return (unsigned int) (lux >> ADC_FRAC_BITS);
+}
+
+/* Apply calibration coefficient to ADC count. */
+static u32 calib_adc(u32 adc, u32 calib)
+{
+	unsigned long scaled = adc;
+
+	scaled *= calib;
+	scaled >>= CALIB_FRAC_BITS;
+
+	return (u32) scaled;
+}
+
+static int tsl2563_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	if (chan->channel == IIO_MOD_LIGHT_BOTH)
+		chip->calib0 = calib_from_sysfs(val);
+	else
+		chip->calib1 = calib_from_sysfs(val);
+
+	return 0;
+}
+
+static int tsl2563_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val,
+			    int *val2,
+			    long m)
+{
+	int ret = -EINVAL;
+	u32 calib0, calib1;
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	mutex_lock(&chip->lock);
+	switch (m) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = tsl2563_get_adc(chip);
+			if (ret)
+				goto error_ret;
+			calib0 = calib_adc(chip->data0, chip->calib0) *
+				chip->cover_comp_gain;
+			calib1 = calib_adc(chip->data1, chip->calib1) *
+				chip->cover_comp_gain;
+			*val = adc_to_lux(calib0, calib1);
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_INTENSITY:
+			ret = tsl2563_get_adc(chip);
+			if (ret)
+				goto error_ret;
+			if (chan->channel == 0)
+				*val = chip->data0;
+			else
+				*val = chip->data1;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			break;
+		}
+		break;
+
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (chan->channel == 0)
+			*val = calib_to_sysfs(chip->calib0);
+		else
+			*val = calib_to_sysfs(chip->calib1);
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+		goto error_ret;
+	}
+
+error_ret:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static const struct iio_chan_spec tsl2563_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.indexed = 1,
+		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
+		.channel = 0,
+	}, {
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_BOTH,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+		.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
+					  IIO_EV_DIR_RISING) |
+			       IIO_EV_BIT(IIO_EV_TYPE_THRESH,
+					  IIO_EV_DIR_FALLING)),
+	}, {
+		.type = IIO_INTENSITY,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_IR,
+		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
+		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
+	}
+};
+
+static int tsl2563_read_thresh(struct iio_dev *indio_dev,
+			       u64 event_code,
+			       int *val)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+
+	switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
+	case IIO_EV_DIR_RISING:
+		*val = chip->high_thres;
+		break;
+	case IIO_EV_DIR_FALLING:
+		*val = chip->low_thres;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int tsl2563_write_thresh(struct iio_dev *indio_dev,
+				  u64 event_code,
+				  int val)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret;
+	u8 address;
+
+	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+		address = TSL2563_REG_HIGHLOW;
+	else
+		address = TSL2563_REG_LOWLOW;
+	mutex_lock(&chip->lock);
+	ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address,
+					val & 0xFF);
+	if (ret)
+		goto error_ret;
+	ret = i2c_smbus_write_byte_data(chip->client,
+					TSL2563_CMD | (address + 1),
+					(val >> 8) & 0xFF);
+	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
+		chip->high_thres = val;
+	else
+		chip->low_thres = val;
+
+error_ret:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static irqreturn_t tsl2563_event_handler(int irq, void *private)
+{
+	struct iio_dev *dev_info = private;
+	struct tsl2563_chip *chip = iio_priv(dev_info);
+
+	iio_push_event(dev_info,
+		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
+					    0,
+					    IIO_EV_TYPE_THRESH,
+					    IIO_EV_DIR_EITHER),
+		       iio_get_time_ns());
+
+	/* clear the interrupt and push the event */
+	i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT);
+	return IRQ_HANDLED;
+}
+
+static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
+					  u64 event_code,
+					  int state)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&chip->lock);
+	if (state && !(chip->intr & 0x30)) {
+		chip->intr &= ~0x30;
+		chip->intr |= 0x10;
+		/* ensure the chip is actually on */
+		cancel_delayed_work(&chip->poweroff_work);
+		if (!tsl2563_get_power(chip)) {
+			ret = tsl2563_set_power(chip, 1);
+			if (ret)
+				goto out;
+			ret = tsl2563_configure(chip);
+			if (ret)
+				goto out;
+		}
+		ret = i2c_smbus_write_byte_data(chip->client,
+						TSL2563_CMD | TSL2563_REG_INT,
+						chip->intr);
+		chip->int_enabled = true;
+	}
+
+	if (!state && (chip->intr & 0x30)) {
+		chip->intr &= ~0x30;
+		ret = i2c_smbus_write_byte_data(chip->client,
+						TSL2563_CMD | TSL2563_REG_INT,
+						chip->intr);
+		chip->int_enabled = false;
+		/* now the interrupt is not enabled, we can go to sleep */
+		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+	}
+out:
+	mutex_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
+					 u64 event_code)
+{
+	struct tsl2563_chip *chip = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&chip->lock);
+	ret = i2c_smbus_read_byte_data(chip->client,
+				       TSL2563_CMD | TSL2563_REG_INT);
+	mutex_unlock(&chip->lock);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & 0x30);
+}
+
+static const struct iio_info tsl2563_info_no_irq = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &tsl2563_read_raw,
+	.write_raw = &tsl2563_write_raw,
+};
+
+static const struct iio_info tsl2563_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &tsl2563_read_raw,
+	.write_raw = &tsl2563_write_raw,
+	.read_event_value = &tsl2563_read_thresh,
+	.write_event_value = &tsl2563_write_thresh,
+	.read_event_config = &tsl2563_read_interrupt_config,
+	.write_event_config = &tsl2563_write_interrupt_config,
+};
+
+static int tsl2563_probe(struct i2c_client *client,
+				const struct i2c_device_id *device_id)
+{
+	struct iio_dev *indio_dev;
+	struct tsl2563_chip *chip;
+	struct tsl2563_platform_data *pdata = client->dev.platform_data;
+	int err = 0;
+	u8 id = 0;
+
+	indio_dev = iio_device_alloc(sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, chip);
+	chip->client = client;
+
+	err = tsl2563_detect(chip);
+	if (err) {
+		dev_err(&client->dev, "detect error %d\n", -err);
+		goto fail1;
+	}
+
+	err = tsl2563_read_id(chip, &id);
+	if (err) {
+		dev_err(&client->dev, "read id error %d\n", -err);
+		goto fail1;
+	}
+
+	mutex_init(&chip->lock);
+
+	/* Default values used until userspace says otherwise */
+	chip->low_thres = 0x0;
+	chip->high_thres = 0xffff;
+	chip->gainlevel = tsl2563_gainlevel_table;
+	chip->intr = TSL2563_INT_PERSIST(4);
+	chip->calib0 = calib_from_sysfs(CALIB_BASE_SYSFS);
+	chip->calib1 = calib_from_sysfs(CALIB_BASE_SYSFS);
+
+	if (pdata)
+		chip->cover_comp_gain = pdata->cover_comp_gain;
+	else
+		chip->cover_comp_gain = 1;
+
+	dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
+	indio_dev->name = client->name;
+	indio_dev->channels = tsl2563_channels;
+	indio_dev->num_channels = ARRAY_SIZE(tsl2563_channels);
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (client->irq)
+		indio_dev->info = &tsl2563_info;
+	else
+		indio_dev->info = &tsl2563_info_no_irq;
+
+	if (client->irq) {
+		err = request_threaded_irq(client->irq,
+					   NULL,
+					   &tsl2563_event_handler,
+					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					   "tsl2563_event",
+					   indio_dev);
+		if (err) {
+			dev_err(&client->dev, "irq request error %d\n", -err);
+			goto fail1;
+		}
+	}
+
+	err = tsl2563_configure(chip);
+	if (err) {
+		dev_err(&client->dev, "configure error %d\n", -err);
+		goto fail2;
+	}
+
+	INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
+
+	/* The interrupt cannot yet be enabled so this is fine without lock */
+	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
+
+	err = iio_device_register(indio_dev);
+	if (err) {
+		dev_err(&client->dev, "iio registration error %d\n", -err);
+		goto fail3;
+	}
+
+	return 0;
+
+fail3:
+	cancel_delayed_work(&chip->poweroff_work);
+	flush_scheduled_work();
+fail2:
+	if (client->irq)
+		free_irq(client->irq, indio_dev);
+fail1:
+	iio_device_free(indio_dev);
+	return err;
+}
+
+static int tsl2563_remove(struct i2c_client *client)
+{
+	struct tsl2563_chip *chip = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = iio_priv_to_dev(chip);
+
+	iio_device_unregister(indio_dev);
+	if (!chip->int_enabled)
+		cancel_delayed_work(&chip->poweroff_work);
+	/* Ensure that interrupts are disabled - then flush any bottom halves */
+	chip->intr &= ~0x30;
+	i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT,
+				  chip->intr);
+	flush_scheduled_work();
+	tsl2563_set_power(chip, 0);
+	if (client->irq)
+		free_irq(client->irq, indio_dev);
+
+	iio_device_free(indio_dev);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tsl2563_suspend(struct device *dev)
+{
+	struct tsl2563_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_set_power(chip, 0);
+	if (ret)
+		goto out;
+
+	chip->suspended = true;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static int tsl2563_resume(struct device *dev)
+{
+	struct tsl2563_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
+	int ret;
+
+	mutex_lock(&chip->lock);
+
+	ret = tsl2563_set_power(chip, 1);
+	if (ret)
+		goto out;
+
+	ret = tsl2563_configure(chip);
+	if (ret)
+		goto out;
+
+	chip->suspended = false;
+
+out:
+	mutex_unlock(&chip->lock);
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(tsl2563_pm_ops, tsl2563_suspend, tsl2563_resume);
+#define TSL2563_PM_OPS (&tsl2563_pm_ops)
+#else
+#define TSL2563_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id tsl2563_id[] = {
+	{ "tsl2560", 0 },
+	{ "tsl2561", 1 },
+	{ "tsl2562", 2 },
+	{ "tsl2563", 3 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tsl2563_id);
+
+static struct i2c_driver tsl2563_i2c_driver = {
+	.driver = {
+		.name	 = "tsl2563",
+		.pm	= TSL2563_PM_OPS,
+	},
+	.probe		= tsl2563_probe,
+	.remove		= tsl2563_remove,
+	.id_table	= tsl2563_id,
+};
+module_i2c_driver(tsl2563_i2c_driver);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("tsl2563 light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/light/Kconfig b/drivers/staging/iio/light/Kconfig
index 4bed30e..ca8d6e6 100644
--- a/drivers/staging/iio/light/Kconfig
+++ b/drivers/staging/iio/light/Kconfig
@@ -25,16 +25,6 @@ config SENSORS_ISL29028
 	 Proximity value via iio. The ISL29028 provides the concurrent sensing
 	 of ambient light and proximity.
 
-config SENSORS_TSL2563
-	tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors"
-	depends on I2C
-	help
-	 If you say yes here you get support for the Taos TSL2560,
-	 TSL2561, TSL2562 and TSL2563 ambient light sensors.
-
-	 This driver can also be built as a module.  If so, the module
-	 will be called tsl2563.
-
 config TSL2583
 	tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters"
 	depends on I2C
diff --git a/drivers/staging/iio/light/Makefile b/drivers/staging/iio/light/Makefile
index 141af1e..9960fdf 100644
--- a/drivers/staging/iio/light/Makefile
+++ b/drivers/staging/iio/light/Makefile
@@ -2,7 +2,6 @@
 # Makefile for industrial I/O Light sensors
 #
 
-obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
 obj-$(CONFIG_SENSORS_ISL29018)	+= isl29018.o
 obj-$(CONFIG_SENSORS_ISL29028)	+= isl29028.o
 obj-$(CONFIG_TSL2583)	+= tsl2583.o
diff --git a/drivers/staging/iio/light/tsl2563.c b/drivers/staging/iio/light/tsl2563.c
deleted file mode 100644
index b91d9bb..0000000
--- a/drivers/staging/iio/light/tsl2563.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * drivers/i2c/chips/tsl2563.c
- *
- * Copyright (C) 2008 Nokia Corporation
- *
- * Written by Timo O. Karjalainen <timo.o.karjalainen@nokia.com>
- * Contact: Amit Kucheria <amit.kucheria@verdurent.com>
- *
- * Converted to IIO driver
- * Amit Kucheria <amit.kucheria@verdurent.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- */
-
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include <linux/iio/events.h>
-#include "tsl2563.h"
-
-/* Use this many bits for fraction part. */
-#define ADC_FRAC_BITS		14
-
-/* Given number of 1/10000's in ADC_FRAC_BITS precision. */
-#define FRAC10K(f)		(((f) * (1L << (ADC_FRAC_BITS))) / (10000))
-
-/* Bits used for fraction in calibration coefficients.*/
-#define CALIB_FRAC_BITS		10
-/* 0.5 in CALIB_FRAC_BITS precision */
-#define CALIB_FRAC_HALF		(1 << (CALIB_FRAC_BITS - 1))
-/* Make a fraction from a number n that was multiplied with b. */
-#define CALIB_FRAC(n, b)	(((n) << CALIB_FRAC_BITS) / (b))
-/* Decimal 10^(digits in sysfs presentation) */
-#define CALIB_BASE_SYSFS	1000
-
-#define TSL2563_CMD		0x80
-#define TSL2563_CLEARINT	0x40
-
-#define TSL2563_REG_CTRL	0x00
-#define TSL2563_REG_TIMING	0x01
-#define TSL2563_REG_LOWLOW	0x02 /* data0 low threshold, 2 bytes */
-#define TSL2563_REG_LOWHIGH	0x03
-#define TSL2563_REG_HIGHLOW	0x04 /* data0 high threshold, 2 bytes */
-#define TSL2563_REG_HIGHHIGH	0x05
-#define TSL2563_REG_INT		0x06
-#define TSL2563_REG_ID		0x0a
-#define TSL2563_REG_DATA0LOW	0x0c /* broadband sensor value, 2 bytes */
-#define TSL2563_REG_DATA0HIGH	0x0d
-#define TSL2563_REG_DATA1LOW	0x0e /* infrared sensor value, 2 bytes */
-#define TSL2563_REG_DATA1HIGH	0x0f
-
-#define TSL2563_CMD_POWER_ON	0x03
-#define TSL2563_CMD_POWER_OFF	0x00
-#define TSL2563_CTRL_POWER_MASK	0x03
-
-#define TSL2563_TIMING_13MS	0x00
-#define TSL2563_TIMING_100MS	0x01
-#define TSL2563_TIMING_400MS	0x02
-#define TSL2563_TIMING_MASK	0x03
-#define TSL2563_TIMING_GAIN16	0x10
-#define TSL2563_TIMING_GAIN1	0x00
-
-#define TSL2563_INT_DISBLED	0x00
-#define TSL2563_INT_LEVEL	0x10
-#define TSL2563_INT_PERSIST(n)	((n) & 0x0F)
-
-struct tsl2563_gainlevel_coeff {
-	u8 gaintime;
-	u16 min;
-	u16 max;
-};
-
-static const struct tsl2563_gainlevel_coeff tsl2563_gainlevel_table[] = {
-	{
-		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN16,
-		.min		= 0,
-		.max		= 65534,
-	}, {
-		.gaintime	= TSL2563_TIMING_400MS | TSL2563_TIMING_GAIN1,
-		.min		= 2048,
-		.max		= 65534,
-	}, {
-		.gaintime	= TSL2563_TIMING_100MS | TSL2563_TIMING_GAIN1,
-		.min		= 4095,
-		.max		= 37177,
-	}, {
-		.gaintime	= TSL2563_TIMING_13MS | TSL2563_TIMING_GAIN1,
-		.min		= 3000,
-		.max		= 65535,
-	},
-};
-
-struct tsl2563_chip {
-	struct mutex		lock;
-	struct i2c_client	*client;
-	struct delayed_work	poweroff_work;
-
-	/* Remember state for suspend and resume functions */
-	bool suspended;
-
-	struct tsl2563_gainlevel_coeff const *gainlevel;
-
-	u16			low_thres;
-	u16			high_thres;
-	u8			intr;
-	bool			int_enabled;
-
-	/* Calibration coefficients */
-	u32			calib0;
-	u32			calib1;
-	int			cover_comp_gain;
-
-	/* Cache current values, to be returned while suspended */
-	u32			data0;
-	u32			data1;
-};
-
-static int tsl2563_set_power(struct tsl2563_chip *chip, int on)
-{
-	struct i2c_client *client = chip->client;
-	u8 cmd;
-
-	cmd = on ? TSL2563_CMD_POWER_ON : TSL2563_CMD_POWER_OFF;
-	return i2c_smbus_write_byte_data(client,
-					 TSL2563_CMD | TSL2563_REG_CTRL, cmd);
-}
-
-/*
- * Return value is 0 for off, 1 for on, or a negative error
- * code if reading failed.
- */
-static int tsl2563_get_power(struct tsl2563_chip *chip)
-{
-	struct i2c_client *client = chip->client;
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_CTRL);
-	if (ret < 0)
-		return ret;
-
-	return (ret & TSL2563_CTRL_POWER_MASK) == TSL2563_CMD_POWER_ON;
-}
-
-static int tsl2563_configure(struct tsl2563_chip *chip)
-{
-	int ret;
-
-	ret = i2c_smbus_write_byte_data(chip->client,
-			TSL2563_CMD | TSL2563_REG_TIMING,
-			chip->gainlevel->gaintime);
-	if (ret)
-		goto error_ret;
-	ret = i2c_smbus_write_byte_data(chip->client,
-			TSL2563_CMD | TSL2563_REG_HIGHLOW,
-			chip->high_thres & 0xFF);
-	if (ret)
-		goto error_ret;
-	ret = i2c_smbus_write_byte_data(chip->client,
-			TSL2563_CMD | TSL2563_REG_HIGHHIGH,
-			(chip->high_thres >> 8) & 0xFF);
-	if (ret)
-		goto error_ret;
-	ret = i2c_smbus_write_byte_data(chip->client,
-			TSL2563_CMD | TSL2563_REG_LOWLOW,
-			chip->low_thres & 0xFF);
-	if (ret)
-		goto error_ret;
-	ret = i2c_smbus_write_byte_data(chip->client,
-			TSL2563_CMD | TSL2563_REG_LOWHIGH,
-			(chip->low_thres >> 8) & 0xFF);
-/*
- * Interrupt register is automatically written anyway if it is relevant
- * so is not here.
- */
-error_ret:
-	return ret;
-}
-
-static void tsl2563_poweroff_work(struct work_struct *work)
-{
-	struct tsl2563_chip *chip =
-		container_of(work, struct tsl2563_chip, poweroff_work.work);
-	tsl2563_set_power(chip, 0);
-}
-
-static int tsl2563_detect(struct tsl2563_chip *chip)
-{
-	int ret;
-
-	ret = tsl2563_set_power(chip, 1);
-	if (ret)
-		return ret;
-
-	ret = tsl2563_get_power(chip);
-	if (ret < 0)
-		return ret;
-
-	return ret ? 0 : -ENODEV;
-}
-
-static int tsl2563_read_id(struct tsl2563_chip *chip, u8 *id)
-{
-	struct i2c_client *client = chip->client;
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(client, TSL2563_CMD | TSL2563_REG_ID);
-	if (ret < 0)
-		return ret;
-
-	*id = ret;
-
-	return 0;
-}
-
-/*
- * "Normalized" ADC value is one obtained with 400ms of integration time and
- * 16x gain. This function returns the number of bits of shift needed to
- * convert between normalized values and HW values obtained using given
- * timing and gain settings.
- */
-static int adc_shiftbits(u8 timing)
-{
-	int shift = 0;
-
-	switch (timing & TSL2563_TIMING_MASK) {
-	case TSL2563_TIMING_13MS:
-		shift += 5;
-		break;
-	case TSL2563_TIMING_100MS:
-		shift += 2;
-		break;
-	case TSL2563_TIMING_400MS:
-		/* no-op */
-		break;
-	}
-
-	if (!(timing & TSL2563_TIMING_GAIN16))
-		shift += 4;
-
-	return shift;
-}
-
-/* Convert a HW ADC value to normalized scale. */
-static u32 normalize_adc(u16 adc, u8 timing)
-{
-	return adc << adc_shiftbits(timing);
-}
-
-static void tsl2563_wait_adc(struct tsl2563_chip *chip)
-{
-	unsigned int delay;
-
-	switch (chip->gainlevel->gaintime & TSL2563_TIMING_MASK) {
-	case TSL2563_TIMING_13MS:
-		delay = 14;
-		break;
-	case TSL2563_TIMING_100MS:
-		delay = 101;
-		break;
-	default:
-		delay = 402;
-	}
-	/*
-	 * TODO: Make sure that we wait at least required delay but why we
-	 * have to extend it one tick more?
-	 */
-	schedule_timeout_interruptible(msecs_to_jiffies(delay) + 2);
-}
-
-static int tsl2563_adjust_gainlevel(struct tsl2563_chip *chip, u16 adc)
-{
-	struct i2c_client *client = chip->client;
-
-	if (adc > chip->gainlevel->max || adc < chip->gainlevel->min) {
-
-		(adc > chip->gainlevel->max) ?
-			chip->gainlevel++ : chip->gainlevel--;
-
-		i2c_smbus_write_byte_data(client,
-					  TSL2563_CMD | TSL2563_REG_TIMING,
-					  chip->gainlevel->gaintime);
-
-		tsl2563_wait_adc(chip);
-		tsl2563_wait_adc(chip);
-
-		return 1;
-	} else
-		return 0;
-}
-
-static int tsl2563_get_adc(struct tsl2563_chip *chip)
-{
-	struct i2c_client *client = chip->client;
-	u16 adc0, adc1;
-	int retry = 1;
-	int ret = 0;
-
-	if (chip->suspended)
-		goto out;
-
-	if (!chip->int_enabled) {
-		cancel_delayed_work(&chip->poweroff_work);
-
-		if (!tsl2563_get_power(chip)) {
-			ret = tsl2563_set_power(chip, 1);
-			if (ret)
-				goto out;
-			ret = tsl2563_configure(chip);
-			if (ret)
-				goto out;
-			tsl2563_wait_adc(chip);
-		}
-	}
-
-	while (retry) {
-		ret = i2c_smbus_read_word_data(client,
-				TSL2563_CMD | TSL2563_REG_DATA0LOW);
-		if (ret < 0)
-			goto out;
-		adc0 = ret;
-
-		ret = i2c_smbus_read_word_data(client,
-				TSL2563_CMD | TSL2563_REG_DATA1LOW);
-		if (ret < 0)
-			goto out;
-		adc1 = ret;
-
-		retry = tsl2563_adjust_gainlevel(chip, adc0);
-	}
-
-	chip->data0 = normalize_adc(adc0, chip->gainlevel->gaintime);
-	chip->data1 = normalize_adc(adc1, chip->gainlevel->gaintime);
-
-	if (!chip->int_enabled)
-		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
-
-	ret = 0;
-out:
-	return ret;
-}
-
-static inline int calib_to_sysfs(u32 calib)
-{
-	return (int) (((calib * CALIB_BASE_SYSFS) +
-		       CALIB_FRAC_HALF) >> CALIB_FRAC_BITS);
-}
-
-static inline u32 calib_from_sysfs(int value)
-{
-	return (((u32) value) << CALIB_FRAC_BITS) / CALIB_BASE_SYSFS;
-}
-
-/*
- * Conversions between lux and ADC values.
- *
- * The basic formula is lux = c0 * adc0 - c1 * adc1, where c0 and c1 are
- * appropriate constants. Different constants are needed for different
- * kinds of light, determined by the ratio adc1/adc0 (basically the ratio
- * of the intensities in infrared and visible wavelengths). lux_table below
- * lists the upper threshold of the adc1/adc0 ratio and the corresponding
- * constants.
- */
-
-struct tsl2563_lux_coeff {
-	unsigned long ch_ratio;
-	unsigned long ch0_coeff;
-	unsigned long ch1_coeff;
-};
-
-static const struct tsl2563_lux_coeff lux_table[] = {
-	{
-		.ch_ratio	= FRAC10K(1300),
-		.ch0_coeff	= FRAC10K(315),
-		.ch1_coeff	= FRAC10K(262),
-	}, {
-		.ch_ratio	= FRAC10K(2600),
-		.ch0_coeff	= FRAC10K(337),
-		.ch1_coeff	= FRAC10K(430),
-	}, {
-		.ch_ratio	= FRAC10K(3900),
-		.ch0_coeff	= FRAC10K(363),
-		.ch1_coeff	= FRAC10K(529),
-	}, {
-		.ch_ratio	= FRAC10K(5200),
-		.ch0_coeff	= FRAC10K(392),
-		.ch1_coeff	= FRAC10K(605),
-	}, {
-		.ch_ratio	= FRAC10K(6500),
-		.ch0_coeff	= FRAC10K(229),
-		.ch1_coeff	= FRAC10K(291),
-	}, {
-		.ch_ratio	= FRAC10K(8000),
-		.ch0_coeff	= FRAC10K(157),
-		.ch1_coeff	= FRAC10K(180),
-	}, {
-		.ch_ratio	= FRAC10K(13000),
-		.ch0_coeff	= FRAC10K(34),
-		.ch1_coeff	= FRAC10K(26),
-	}, {
-		.ch_ratio	= ULONG_MAX,
-		.ch0_coeff	= 0,
-		.ch1_coeff	= 0,
-	},
-};
-
-/* Convert normalized, scaled ADC values to lux. */
-static unsigned int adc_to_lux(u32 adc0, u32 adc1)
-{
-	const struct tsl2563_lux_coeff *lp = lux_table;
-	unsigned long ratio, lux, ch0 = adc0, ch1 = adc1;
-
-	ratio = ch0 ? ((ch1 << ADC_FRAC_BITS) / ch0) : ULONG_MAX;
-
-	while (lp->ch_ratio < ratio)
-		lp++;
-
-	lux = ch0 * lp->ch0_coeff - ch1 * lp->ch1_coeff;
-
-	return (unsigned int) (lux >> ADC_FRAC_BITS);
-}
-
-/* Apply calibration coefficient to ADC count. */
-static u32 calib_adc(u32 adc, u32 calib)
-{
-	unsigned long scaled = adc;
-
-	scaled *= calib;
-	scaled >>= CALIB_FRAC_BITS;
-
-	return (u32) scaled;
-}
-
-static int tsl2563_write_raw(struct iio_dev *indio_dev,
-			       struct iio_chan_spec const *chan,
-			       int val,
-			       int val2,
-			       long mask)
-{
-	struct tsl2563_chip *chip = iio_priv(indio_dev);
-
-	if (chan->channel == IIO_MOD_LIGHT_BOTH)
-		chip->calib0 = calib_from_sysfs(val);
-	else
-		chip->calib1 = calib_from_sysfs(val);
-
-	return 0;
-}
-
-static int tsl2563_read_raw(struct iio_dev *indio_dev,
-			    struct iio_chan_spec const *chan,
-			    int *val,
-			    int *val2,
-			    long m)
-{
-	int ret = -EINVAL;
-	u32 calib0, calib1;
-	struct tsl2563_chip *chip = iio_priv(indio_dev);
-
-	mutex_lock(&chip->lock);
-	switch (m) {
-	case IIO_CHAN_INFO_RAW:
-	case IIO_CHAN_INFO_PROCESSED:
-		switch (chan->type) {
-		case IIO_LIGHT:
-			ret = tsl2563_get_adc(chip);
-			if (ret)
-				goto error_ret;
-			calib0 = calib_adc(chip->data0, chip->calib0) *
-				chip->cover_comp_gain;
-			calib1 = calib_adc(chip->data1, chip->calib1) *
-				chip->cover_comp_gain;
-			*val = adc_to_lux(calib0, calib1);
-			ret = IIO_VAL_INT;
-			break;
-		case IIO_INTENSITY:
-			ret = tsl2563_get_adc(chip);
-			if (ret)
-				goto error_ret;
-			if (chan->channel == 0)
-				*val = chip->data0;
-			else
-				*val = chip->data1;
-			ret = IIO_VAL_INT;
-			break;
-		default:
-			break;
-		}
-		break;
-
-	case IIO_CHAN_INFO_CALIBSCALE:
-		if (chan->channel == 0)
-			*val = calib_to_sysfs(chip->calib0);
-		else
-			*val = calib_to_sysfs(chip->calib1);
-		ret = IIO_VAL_INT;
-		break;
-	default:
-		ret = -EINVAL;
-		goto error_ret;
-	}
-
-error_ret:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static const struct iio_chan_spec tsl2563_channels[] = {
-	{
-		.type = IIO_LIGHT,
-		.indexed = 1,
-		.info_mask = IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT,
-		.channel = 0,
-	}, {
-		.type = IIO_INTENSITY,
-		.modified = 1,
-		.channel2 = IIO_MOD_LIGHT_BOTH,
-		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
-		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
-		.event_mask = (IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					  IIO_EV_DIR_RISING) |
-			       IIO_EV_BIT(IIO_EV_TYPE_THRESH,
-					  IIO_EV_DIR_FALLING)),
-	}, {
-		.type = IIO_INTENSITY,
-		.modified = 1,
-		.channel2 = IIO_MOD_LIGHT_IR,
-		.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT |
-		IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT,
-	}
-};
-
-static int tsl2563_read_thresh(struct iio_dev *indio_dev,
-			       u64 event_code,
-			       int *val)
-{
-	struct tsl2563_chip *chip = iio_priv(indio_dev);
-
-	switch (IIO_EVENT_CODE_EXTRACT_DIR(event_code)) {
-	case IIO_EV_DIR_RISING:
-		*val = chip->high_thres;
-		break;
-	case IIO_EV_DIR_FALLING:
-		*val = chip->low_thres;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int tsl2563_write_thresh(struct iio_dev *indio_dev,
-				  u64 event_code,
-				  int val)
-{
-	struct tsl2563_chip *chip = iio_priv(indio_dev);
-	int ret;
-	u8 address;
-
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
-		address = TSL2563_REG_HIGHLOW;
-	else
-		address = TSL2563_REG_LOWLOW;
-	mutex_lock(&chip->lock);
-	ret = i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | address,
-					val & 0xFF);
-	if (ret)
-		goto error_ret;
-	ret = i2c_smbus_write_byte_data(chip->client,
-					TSL2563_CMD | (address + 1),
-					(val >> 8) & 0xFF);
-	if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) == IIO_EV_DIR_RISING)
-		chip->high_thres = val;
-	else
-		chip->low_thres = val;
-
-error_ret:
-	mutex_unlock(&chip->lock);
-
-	return ret;
-}
-
-static irqreturn_t tsl2563_event_handler(int irq, void *private)
-{
-	struct iio_dev *dev_info = private;
-	struct tsl2563_chip *chip = iio_priv(dev_info);
-
-	iio_push_event(dev_info,
-		       IIO_UNMOD_EVENT_CODE(IIO_LIGHT,
-					    0,
-					    IIO_EV_TYPE_THRESH,
-					    IIO_EV_DIR_EITHER),
-		       iio_get_time_ns());
-
-	/* clear the interrupt and push the event */
-	i2c_smbus_write_byte(chip->client, TSL2563_CMD | TSL2563_CLEARINT);
-	return IRQ_HANDLED;
-}
-
-static int tsl2563_write_interrupt_config(struct iio_dev *indio_dev,
-					  u64 event_code,
-					  int state)
-{
-	struct tsl2563_chip *chip = iio_priv(indio_dev);
-	int ret = 0;
-
-	mutex_lock(&chip->lock);
-	if (state && !(chip->intr & 0x30)) {
-		chip->intr &= ~0x30;
-		chip->intr |= 0x10;
-		/* ensure the chip is actually on */
-		cancel_delayed_work(&chip->poweroff_work);
-		if (!tsl2563_get_power(chip)) {
-			ret = tsl2563_set_power(chip, 1);
-			if (ret)
-				goto out;
-			ret = tsl2563_configure(chip);
-			if (ret)
-				goto out;
-		}
-		ret = i2c_smbus_write_byte_data(chip->client,
-						TSL2563_CMD | TSL2563_REG_INT,
-						chip->intr);
-		chip->int_enabled = true;
-	}
-
-	if (!state && (chip->intr & 0x30)) {
-		chip->intr &= ~0x30;
-		ret = i2c_smbus_write_byte_data(chip->client,
-						TSL2563_CMD | TSL2563_REG_INT,
-						chip->intr);
-		chip->int_enabled = false;
-		/* now the interrupt is not enabled, we can go to sleep */
-		schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
-	}
-out:
-	mutex_unlock(&chip->lock);
-
-	return ret;
-}
-
-static int tsl2563_read_interrupt_config(struct iio_dev *indio_dev,
-					 u64 event_code)
-{
-	struct tsl2563_chip *chip = iio_priv(indio_dev);
-	int ret;
-
-	mutex_lock(&chip->lock);
-	ret = i2c_smbus_read_byte_data(chip->client,
-				       TSL2563_CMD | TSL2563_REG_INT);
-	mutex_unlock(&chip->lock);
-	if (ret < 0)
-		return ret;
-
-	return !!(ret & 0x30);
-}
-
-static const struct iio_info tsl2563_info_no_irq = {
-	.driver_module = THIS_MODULE,
-	.read_raw = &tsl2563_read_raw,
-	.write_raw = &tsl2563_write_raw,
-};
-
-static const struct iio_info tsl2563_info = {
-	.driver_module = THIS_MODULE,
-	.read_raw = &tsl2563_read_raw,
-	.write_raw = &tsl2563_write_raw,
-	.read_event_value = &tsl2563_read_thresh,
-	.write_event_value = &tsl2563_write_thresh,
-	.read_event_config = &tsl2563_read_interrupt_config,
-	.write_event_config = &tsl2563_write_interrupt_config,
-};
-
-static int tsl2563_probe(struct i2c_client *client,
-				const struct i2c_device_id *device_id)
-{
-	struct iio_dev *indio_dev;
-	struct tsl2563_chip *chip;
-	struct tsl2563_platform_data *pdata = client->dev.platform_data;
-	int err = 0;
-	u8 id = 0;
-
-	indio_dev = iio_device_alloc(sizeof(*chip));
-	if (!indio_dev)
-		return -ENOMEM;
-
-	chip = iio_priv(indio_dev);
-
-	i2c_set_clientdata(client, chip);
-	chip->client = client;
-
-	err = tsl2563_detect(chip);
-	if (err) {
-		dev_err(&client->dev, "detect error %d\n", -err);
-		goto fail1;
-	}
-
-	err = tsl2563_read_id(chip, &id);
-	if (err) {
-		dev_err(&client->dev, "read id error %d\n", -err);
-		goto fail1;
-	}
-
-	mutex_init(&chip->lock);
-
-	/* Default values used until userspace says otherwise */
-	chip->low_thres = 0x0;
-	chip->high_thres = 0xffff;
-	chip->gainlevel = tsl2563_gainlevel_table;
-	chip->intr = TSL2563_INT_PERSIST(4);
-	chip->calib0 = calib_from_sysfs(CALIB_BASE_SYSFS);
-	chip->calib1 = calib_from_sysfs(CALIB_BASE_SYSFS);
-
-	if (pdata)
-		chip->cover_comp_gain = pdata->cover_comp_gain;
-	else
-		chip->cover_comp_gain = 1;
-
-	dev_info(&client->dev, "model %d, rev. %d\n", id >> 4, id & 0x0f);
-	indio_dev->name = client->name;
-	indio_dev->channels = tsl2563_channels;
-	indio_dev->num_channels = ARRAY_SIZE(tsl2563_channels);
-	indio_dev->dev.parent = &client->dev;
-	indio_dev->modes = INDIO_DIRECT_MODE;
-
-	if (client->irq)
-		indio_dev->info = &tsl2563_info;
-	else
-		indio_dev->info = &tsl2563_info_no_irq;
-
-	if (client->irq) {
-		err = request_threaded_irq(client->irq,
-					   NULL,
-					   &tsl2563_event_handler,
-					   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
-					   "tsl2563_event",
-					   indio_dev);
-		if (err) {
-			dev_err(&client->dev, "irq request error %d\n", -err);
-			goto fail1;
-		}
-	}
-
-	err = tsl2563_configure(chip);
-	if (err) {
-		dev_err(&client->dev, "configure error %d\n", -err);
-		goto fail2;
-	}
-
-	INIT_DELAYED_WORK(&chip->poweroff_work, tsl2563_poweroff_work);
-
-	/* The interrupt cannot yet be enabled so this is fine without lock */
-	schedule_delayed_work(&chip->poweroff_work, 5 * HZ);
-
-	err = iio_device_register(indio_dev);
-	if (err) {
-		dev_err(&client->dev, "iio registration error %d\n", -err);
-		goto fail3;
-	}
-
-	return 0;
-
-fail3:
-	cancel_delayed_work(&chip->poweroff_work);
-	flush_scheduled_work();
-fail2:
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-fail1:
-	iio_device_free(indio_dev);
-	return err;
-}
-
-static int tsl2563_remove(struct i2c_client *client)
-{
-	struct tsl2563_chip *chip = i2c_get_clientdata(client);
-	struct iio_dev *indio_dev = iio_priv_to_dev(chip);
-
-	iio_device_unregister(indio_dev);
-	if (!chip->int_enabled)
-		cancel_delayed_work(&chip->poweroff_work);
-	/* Ensure that interrupts are disabled - then flush any bottom halves */
-	chip->intr &= ~0x30;
-	i2c_smbus_write_byte_data(chip->client, TSL2563_CMD | TSL2563_REG_INT,
-				  chip->intr);
-	flush_scheduled_work();
-	tsl2563_set_power(chip, 0);
-	if (client->irq)
-		free_irq(client->irq, indio_dev);
-
-	iio_device_free(indio_dev);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int tsl2563_suspend(struct device *dev)
-{
-	struct tsl2563_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
-	int ret;
-
-	mutex_lock(&chip->lock);
-
-	ret = tsl2563_set_power(chip, 0);
-	if (ret)
-		goto out;
-
-	chip->suspended = true;
-
-out:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static int tsl2563_resume(struct device *dev)
-{
-	struct tsl2563_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
-	int ret;
-
-	mutex_lock(&chip->lock);
-
-	ret = tsl2563_set_power(chip, 1);
-	if (ret)
-		goto out;
-
-	ret = tsl2563_configure(chip);
-	if (ret)
-		goto out;
-
-	chip->suspended = false;
-
-out:
-	mutex_unlock(&chip->lock);
-	return ret;
-}
-
-static SIMPLE_DEV_PM_OPS(tsl2563_pm_ops, tsl2563_suspend, tsl2563_resume);
-#define TSL2563_PM_OPS (&tsl2563_pm_ops)
-#else
-#define TSL2563_PM_OPS NULL
-#endif
-
-static const struct i2c_device_id tsl2563_id[] = {
-	{ "tsl2560", 0 },
-	{ "tsl2561", 1 },
-	{ "tsl2562", 2 },
-	{ "tsl2563", 3 },
-	{}
-};
-MODULE_DEVICE_TABLE(i2c, tsl2563_id);
-
-static struct i2c_driver tsl2563_i2c_driver = {
-	.driver = {
-		.name	 = "tsl2563",
-		.pm	= TSL2563_PM_OPS,
-	},
-	.probe		= tsl2563_probe,
-	.remove		= tsl2563_remove,
-	.id_table	= tsl2563_id,
-};
-module_i2c_driver(tsl2563_i2c_driver);
-
-MODULE_AUTHOR("Nokia Corporation");
-MODULE_DESCRIPTION("tsl2563 light sensor driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/light/tsl2563.h b/drivers/staging/iio/light/tsl2563.h
deleted file mode 100644
index b97368b..0000000
--- a/drivers/staging/iio/light/tsl2563.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __LINUX_TSL2563_H
-#define __LINUX_TSL2563_H
-
-struct tsl2563_platform_data {
-	int cover_comp_gain;
-};
-
-#endif /* __LINUX_TSL2563_H */
-
diff --git a/include/linux/platform_data/tsl2563.h b/include/linux/platform_data/tsl2563.h
new file mode 100644
index 0000000..b97368b
--- /dev/null
+++ b/include/linux/platform_data/tsl2563.h
@@ -0,0 +1,9 @@
+#ifndef __LINUX_TSL2563_H
+#define __LINUX_TSL2563_H
+
+struct tsl2563_platform_data {
+	int cover_comp_gain;
+};
+
+#endif /* __LINUX_TSL2563_H */
+
-- 
1.8.1