All of lore.kernel.org
 help / color / mirror / Atom feed
From: Aaron Lu <aaron.lu@intel.com>
To: Alan Stern <stern@rowland.harvard.edu>,
	Jens Axboe <axboe@kernel.dk>, "Rafael J. Wysocki" <rjw@sisk.pl>,
	James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: linux-pm@vger.kernel.org, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org, Aaron Lu <aaron.lwe@gmail.com>,
	Aaron Lu <aaron.lu@intel.com>, Shane Huang <shane.huang@amd.com>
Subject: [PATCH v7 4/4] sd: change to auto suspend mode
Date: Wed, 16 Jan 2013 17:02:21 +0800	[thread overview]
Message-ID: <1358326941-3725-5-git-send-email-aaron.lu@intel.com> (raw)
In-Reply-To: <1358326941-3725-1-git-send-email-aaron.lu@intel.com>

From: Lin Ming <ming.m.lin@intel.com>

Uses block layer runtime pm helper functions in
scsi_runtime_suspend/resume.
Remove scsi_autopm_* from sd open/release path and check_events path.
And remove the quiesce call in runtime suspend path, as we know there is
no request to quiesce for the device.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
---
 drivers/scsi/scsi_pm.c    | 35 +++++++++++++++++++++++------------
 drivers/scsi/scsi_sysfs.c |  2 ++
 drivers/scsi/sd.c         | 12 ------------
 3 files changed, 25 insertions(+), 24 deletions(-)

diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 8f6b12c..d5ddc2c 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -147,15 +147,19 @@ static int scsi_bus_restore(struct device *dev)
 static int scsi_runtime_suspend(struct device *dev)
 {
 	int err = 0;
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	dev_dbg(dev, "scsi_runtime_suspend\n");
 	if (scsi_is_sdev_device(dev)) {
-		err = scsi_dev_type_suspend(dev,
-				pm ? pm->runtime_suspend : NULL);
-		if (err == -EAGAIN)
-			pm_schedule_suspend(dev, jiffies_to_msecs(
-				round_jiffies_up_relative(HZ/10)));
+		struct scsi_device *sdev = to_scsi_device(dev);
+		struct request_queue *q = sdev->request_queue;
+
+		err = blk_pre_runtime_suspend(q);
+		if (err)
+			return err;
+
+		err = pm_generic_runtime_suspend(dev);
+
+		blk_post_runtime_suspend(q, err);
 	}
 
 	/* Insert hooks here for targets, hosts, and transport classes */
@@ -166,11 +170,16 @@ static int scsi_runtime_suspend(struct device *dev)
 static int scsi_runtime_resume(struct device *dev)
 {
 	int err = 0;
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	dev_dbg(dev, "scsi_runtime_resume\n");
-	if (scsi_is_sdev_device(dev))
-		err = scsi_dev_type_resume(dev, pm ? pm->runtime_resume : NULL);
+	if (scsi_is_sdev_device(dev)) {
+		struct scsi_device *sdev = to_scsi_device(dev);
+		struct request_queue *q = sdev->request_queue;
+
+		blk_pre_runtime_resume(q);
+		err = pm_generic_runtime_resume(dev);
+		blk_post_runtime_resume(q, err);
+	}
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
@@ -185,10 +194,12 @@ static int scsi_runtime_idle(struct device *dev)
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
-	if (scsi_is_sdev_device(dev))
-		err = pm_schedule_suspend(dev, 100);
-	else
+	if (scsi_is_sdev_device(dev)) {
+		pm_runtime_mark_last_busy(dev);
+		err = pm_runtime_autosuspend(dev);
+	} else {
 		err = pm_runtime_suspend(dev);
+	}
 	return err;
 }
 
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 931a7d9..fff7637 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -893,6 +893,8 @@ int scsi_sysfs_add_sdev(struct scsi_device *sdev)
 	 */
 	scsi_autopm_get_device(sdev);
 
+	blk_pm_runtime_init(rq, &sdev->sdev_gendev);
+
 	error = device_add(&sdev->sdev_gendev);
 	if (error) {
 		sdev_printk(KERN_INFO, sdev,
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 8ca160e..70c202c 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1121,10 +1121,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
 
 	sdev = sdkp->device;
 
-	retval = scsi_autopm_get_device(sdev);
-	if (retval)
-		goto error_autopm;
-
 	/*
 	 * If the device is in error recovery, wait until it is done.
 	 * If the device is offline, then disallow any access to it.
@@ -1169,8 +1165,6 @@ static int sd_open(struct block_device *bdev, fmode_t mode)
 	return 0;
 
 error_out:
-	scsi_autopm_put_device(sdev);
-error_autopm:
 	scsi_disk_put(sdkp);
 	return retval;	
 }
@@ -1205,7 +1199,6 @@ static int sd_release(struct gendisk *disk, fmode_t mode)
 	 * XXX is followed by a "rmmod sd_mod"?
 	 */
 
-	scsi_autopm_put_device(sdev);
 	scsi_disk_put(sdkp);
 	return 0;
 }
@@ -1367,14 +1360,9 @@ static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
 	retval = -ENODEV;
 
 	if (scsi_block_when_processing_errors(sdp)) {
-		retval = scsi_autopm_get_device(sdp);
-		if (retval)
-			goto out;
-
 		sshdr  = kzalloc(sizeof(*sshdr), GFP_KERNEL);
 		retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
 					      sshdr);
-		scsi_autopm_put_device(sdp);
 	}
 
 	/* failed to execute TUR, assume media not present */
-- 
1.8.0.2


  parent reply	other threads:[~2013-01-16  9:01 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-16  9:02 [PATCH v7 0/4] block layer runtime pm Aaron Lu
2013-01-16  9:02 ` [PATCH v7 1/4] block: add a flag to identify PM request Aaron Lu
2013-01-16  9:02 ` [PATCH v7 2/4] block: add runtime pm helpers Aaron Lu
2013-01-16  9:02 ` [PATCH v7 3/4] block: implement runtime pm strategy Aaron Lu
2013-01-16 15:30   ` Alan Stern
2013-01-16 15:30     ` Alan Stern
2013-01-17  5:13     ` Aaron Lu
2013-01-17 15:11       ` Alan Stern
2013-01-17 15:11         ` Alan Stern
2013-01-18  8:27         ` Aaron Lu
2013-01-18 15:26           ` Alan Stern
2013-01-18 15:26             ` Alan Stern
2013-01-19  6:24             ` Aaron Lu
2013-01-19 18:11               ` Alan Stern
2013-01-19 18:11                 ` Alan Stern
2013-01-28  9:21                 ` Aaron Lu
2013-01-28 15:11                   ` Alan Stern
2013-01-17  6:31     ` Aaron Lu
2013-01-16  9:02 ` Aaron Lu [this message]
2013-01-18 21:25   ` [PATCH v7 4/4] sd: change to auto suspend mode Alan Stern
2013-01-18 21:25     ` Alan Stern
2013-01-21 12:44     ` Aaron Lu
2013-01-28  8:56     ` Aaron Lu
2013-01-28 15:12       ` Alan Stern
2013-01-28 15:12         ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1358326941-3725-5-git-send-email-aaron.lu@intel.com \
    --to=aaron.lu@intel.com \
    --cc=James.Bottomley@hansenpartnership.com \
    --cc=aaron.lwe@gmail.com \
    --cc=axboe@kernel.dk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=shane.huang@amd.com \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.