From: Paul Gortmaker <paul.gortmaker@windriver.com>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Paul Gortmaker <paul.gortmaker@windriver.com>
Subject: [PATCH net-next 12/15] drivers/net: delete the really obsolete 8390 based 10Mbit ISA drivers
Date: Mon, 21 Jan 2013 20:46:19 -0500 [thread overview]
Message-ID: <1358819182-28032-13-git-send-email-paul.gortmaker@windriver.com> (raw)
In-Reply-To: <1358819182-28032-1-git-send-email-paul.gortmaker@windriver.com>
This is an area I know all too well, after being author of several 8390
drivers, and maintainer of all 8390 drivers during a large part of their
active lifecycle.
To that end, I can say this with a reasonable degree of confidence.
The drivers deleted here represent the earliest (as in early 1990)
hardware and/or rare hardware. The remaining hardware not deleted
here is the more modern/sane of the lot, with ISA-PnP and jumperless
"soft configuration" like the wd and smc cards had.
The original ne2000 driver (ne.c) gets a pass at this time since
AT/LANTIC based cards that could be both ne2000 or wd-like (with
shared memory) and with jumperless configuration were made in the
mid to late 1990's, and performed reasonably well for their era.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
drivers/net/Space.c | 16 -
drivers/net/ethernet/8390/3c503.c | 778 ------------------------------------
drivers/net/ethernet/8390/3c503.h | 91 -----
drivers/net/ethernet/8390/Kconfig | 48 ---
drivers/net/ethernet/8390/Makefile | 4 -
drivers/net/ethernet/8390/e2100.c | 489 ----------------------
drivers/net/ethernet/8390/hp-plus.c | 505 -----------------------
drivers/net/ethernet/8390/hp.c | 438 --------------------
8 files changed, 2369 deletions(-)
delete mode 100644 drivers/net/ethernet/8390/3c503.c
delete mode 100644 drivers/net/ethernet/8390/3c503.h
delete mode 100644 drivers/net/ethernet/8390/e2100.c
delete mode 100644 drivers/net/ethernet/8390/hp-plus.c
delete mode 100644 drivers/net/ethernet/8390/hp.c
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 15de20b..393b017 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -40,14 +40,10 @@
extern struct net_device *hp100_probe(int unit);
extern struct net_device *ultra_probe(int unit);
extern struct net_device *wd_probe(int unit);
-extern struct net_device *el2_probe(int unit);
extern struct net_device *ne_probe(int unit);
-extern struct net_device *hp_probe(int unit);
-extern struct net_device *hp_plus_probe(int unit);
extern struct net_device *fmv18x_probe(int unit);
extern struct net_device *i82596_probe(int unit);
extern struct net_device *ewrk3_probe(int unit);
-extern struct net_device *e2100_probe(int unit);
extern struct net_device *ni65_probe(int unit);
extern struct net_device *sonic_probe(int unit);
extern struct net_device *seeq8005_probe(int unit);
@@ -108,18 +104,6 @@ static struct devprobe2 isa_probes[] __initdata = {
#ifdef CONFIG_WD80x3
{wd_probe, 0},
#endif
-#ifdef CONFIG_EL2 /* 3c503 */
- {el2_probe, 0},
-#endif
-#ifdef CONFIG_HPLAN
- {hp_probe, 0},
-#endif
-#ifdef CONFIG_HPLAN_PLUS
- {hp_plus_probe, 0},
-#endif
-#ifdef CONFIG_E2100 /* Cabletron E21xx series. */
- {e2100_probe, 0},
-#endif
#if defined(CONFIG_NE2000) || \
defined(CONFIG_NE_H8300) /* ISA (use ne2k-pci for PCI cards) */
{ne_probe, 0},
diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c
deleted file mode 100644
index 0e9afe7..0000000
diff --git a/drivers/net/ethernet/8390/3c503.h b/drivers/net/ethernet/8390/3c503.h
deleted file mode 100644
index e2367b8..0000000
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig
index e49a442..1b78ca7 100644
--- a/drivers/net/ethernet/8390/Kconfig
+++ b/drivers/net/ethernet/8390/Kconfig
@@ -21,18 +21,6 @@ config NET_VENDOR_8390
if NET_VENDOR_8390
-config EL2
- tristate "3c503 \"EtherLink II\" support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called 3c503.
-
config PCMCIA_AXNET
tristate "Asix AX88190 PCMCIA support"
depends on PCMCIA
@@ -62,42 +50,6 @@ config AX88796_93CX6
---help---
Select this if your platform comes with an external 93CX6 eeprom.
-config E2100
- tristate "Cabletron E21xx support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called e2100.
-
-config HPLAN_PLUS
- tristate "HP PCLAN+ (27247B and 27252A) support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp-plus.
-
-config HPLAN
- tristate "HP PCLAN (27245 and other 27xxx series) support"
- depends on ISA
- select CRC32
- ---help---
- If you have a network (Ethernet) card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module
- will be called hp.
-
config HYDRA
tristate "Hydra support"
depends on ZORRO
diff --git a/drivers/net/ethernet/8390/Makefile b/drivers/net/ethernet/8390/Makefile
index e8bb97c..588954a 100644
--- a/drivers/net/ethernet/8390/Makefile
+++ b/drivers/net/ethernet/8390/Makefile
@@ -6,10 +6,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_AX88796) += ax88796.o
-obj-$(CONFIG_E2100) += e2100.o 8390.o
-obj-$(CONFIG_EL2) += 3c503.o 8390p.o
-obj-$(CONFIG_HPLAN_PLUS) += hp-plus.o 8390p.o
-obj-$(CONFIG_HPLAN) += hp.o 8390p.o
obj-$(CONFIG_HYDRA) += hydra.o 8390.o
obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
obj-$(CONFIG_NE2000) += ne.o 8390p.o
diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c
deleted file mode 100644
index ed55ce8..0000000
diff --git a/drivers/net/ethernet/8390/hp-plus.c b/drivers/net/ethernet/8390/hp-plus.c
deleted file mode 100644
index 52f70f9..0000000
diff --git a/drivers/net/ethernet/8390/hp.c b/drivers/net/ethernet/8390/hp.c
deleted file mode 100644
index 37fa89a..0000000
--
1.8.1
next prev parent reply other threads:[~2013-01-22 1:46 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-22 1:46 [PATCH RFC net-next 00/15] drivers/net: obsolete ISA driver round-up Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 01/15] drivers/net: delete 486 Apricot support Paul Gortmaker
2013-01-22 15:51 ` Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 02/15] drivers/net: delete intel 486 panther onboard ethernet support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 03/15] drivers/net: delete old 8bit ISA 3c501 driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 04/15] drivers/net: delete old parallel port de600/de620 drivers Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 05/15] drivers/net: delete the 3Com 3c505/3c507 intel i825xx support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 06/15] drivers/net: delete ISA intel eexpress and eepro i825xx drivers Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 07/15] drivers/net: delete intel i825xx based znet notebook driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 08/15] drivers/net: delete Racal Interlan ISA ni52 (i825xx) driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 09/15] drivers/net: delete old 8 bit ISA Racal ni5010 support Paul Gortmaker
2013-01-22 19:59 ` Jan-Pascal van Best
2013-01-22 20:55 ` Ondrej Zary
2013-01-23 3:27 ` Andreas Mohr
2013-01-22 1:46 ` [PATCH net-next 10/15] drivers/net: delete at1700 ISA 10Mbit driver Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 11/15] drivers/net: delete old fujitsu based eth16i driver Paul Gortmaker
2013-01-22 9:26 ` David Laight
2013-01-22 1:46 ` Paul Gortmaker [this message]
2013-01-22 1:46 ` [PATCH net-next 13/15] drivers/net: delete old DEC depca ISA drivers support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 14/15] drivers/net: delete Digital EtherWorks-3 support Paul Gortmaker
2013-01-22 1:46 ` [PATCH net-next 15/15] drivers/net: delete old x86 variant of the seeq8005 driver Paul Gortmaker
2013-01-22 9:46 ` [PATCH RFC net-next 00/15] drivers/net: obsolete ISA driver round-up David Laight
2013-01-22 19:49 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1358819182-28032-13-git-send-email-paul.gortmaker@windriver.com \
--to=paul.gortmaker@windriver.com \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.