From: Tom Warren <twarren.nvidia@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 4/7] Tegra114: Add common CPU (shared) files
Date: Mon, 28 Jan 2013 16:32:10 -0700 [thread overview]
Message-ID: <1359415933-30002-4-git-send-email-twarren@nvidia.com> (raw)
In-Reply-To: <1359415933-30002-1-git-send-email-twarren@nvidia.com>
These files are used by both SPL and main U-Boot.
Signed-off-by: Tom Warren <twarren@nvidia.com>
---
Changes in v2:
- update all new copyright header dates to 2013
- use ODMDATA correctly in query_dram_size
Changes in v3:
- rename T114 SKU ID
- use common clock code
arch/arm/cpu/tegra-common/ap.c | 9 +-
arch/arm/cpu/tegra-common/board.c | 21 +-
arch/arm/cpu/tegra114-common/Makefile | 41 ++
arch/arm/cpu/tegra114-common/clock.c | 655 ++++++++++++++++++++++++++++++++
arch/arm/cpu/tegra114-common/funcmux.c | 63 +++
arch/arm/cpu/tegra114-common/pinmux.c | 506 ++++++++++++++++++++++++
6 files changed, 1291 insertions(+), 4 deletions(-)
create mode 100644 arch/arm/cpu/tegra114-common/Makefile
create mode 100644 arch/arm/cpu/tegra114-common/clock.c
create mode 100644 arch/arm/cpu/tegra114-common/funcmux.c
create mode 100644 arch/arm/cpu/tegra114-common/pinmux.c
diff --git a/arch/arm/cpu/tegra-common/ap.c b/arch/arm/cpu/tegra-common/ap.c
index aebe29e..236cda8 100644
--- a/arch/arm/cpu/tegra-common/ap.c
+++ b/arch/arm/cpu/tegra-common/ap.c
@@ -31,6 +31,7 @@
#include <asm/arch-tegra/fuse.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/scu.h>
+#include <asm/arch-tegra/tegra.h>
#include <asm/arch-tegra/warmboot.h>
int tegra_get_chip_type(void)
@@ -42,7 +43,7 @@ int tegra_get_chip_type(void)
/*
* This is undocumented, Chip ID is bits 15:8 of the register
* APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
- * Tegra30
+ * Tegra30, and 0x35 for T114.
*/
gp = (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE;
rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
@@ -68,6 +69,12 @@ int tegra_get_chip_type(void)
return TEGRA_SOC_T30;
}
break;
+ case CHIPID_TEGRA114:
+ switch (tegra_sku_id) {
+ case SKU_ID_T114_ENG:
+ return TEGRA_SOC_T114;
+ }
+ break;
}
/* unknown sku id */
return TEGRA_SOC_UNKNOWN;
diff --git a/arch/arm/cpu/tegra-common/board.c b/arch/arm/cpu/tegra-common/board.c
index 1ec6c06..08bfa64 100644
--- a/arch/arm/cpu/tegra-common/board.c
+++ b/arch/arm/cpu/tegra-common/board.c
@@ -37,8 +37,10 @@ enum {
/* UARTs which we can enable */
UARTA = 1 << 0,
UARTB = 1 << 1,
+ UARTC = 1 << 2,
UARTD = 1 << 3,
- UART_COUNT = 4,
+ UARTE = 1 << 4,
+ UART_COUNT = 5,
};
/*
@@ -68,7 +70,7 @@ unsigned int query_sdram_size(void)
case 3:
return 0x40000000; /* 1GB */
}
-#else /* Tegra30 */
+#else /* Tegra30/Tegra114 */
/* bits 31:28 in OdmData are used for RAM size on T30 */
switch ((reg) >> 28) {
case 0:
@@ -117,12 +119,18 @@ static int uart_configs[] = {
-1,
FUNCMUX_UART4_GMC,
-1,
-#else /* Tegra30 */
+#elif defined(CONFIG_TEGRA30)
FUNCMUX_UART1_ULPI, /* UARTA */
-1,
-1,
-1,
-1,
+#else /* Tegra114 */
+ -1,
+ -1,
+ -1,
+ FUNCMUX_UART4_GMI, /* UARTD */
+ -1,
#endif
};
@@ -138,6 +146,7 @@ static void setup_uarts(int uart_ids)
PERIPH_ID_UART2,
PERIPH_ID_UART3,
PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
};
size_t i;
@@ -161,9 +170,15 @@ void board_init_uart_f(void)
#ifdef CONFIG_TEGRA_ENABLE_UARTB
uart_ids |= UARTB;
#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTC
+ uart_ids |= UARTC;
+#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTD
uart_ids |= UARTD;
#endif
+#ifdef CONFIG_TEGRA_ENABLE_UARTE
+ uart_ids |= UARTE;
+#endif
setup_uarts(uart_ids);
}
diff --git a/arch/arm/cpu/tegra114-common/Makefile b/arch/arm/cpu/tegra114-common/Makefile
new file mode 100644
index 0000000..5b53a71
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+#
+# (C) Copyright 2000-2008
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC)-common.o
+
+COBJS-y += clock.o funcmux.o pinmux.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/tegra114-common/clock.c b/arch/arm/cpu/tegra114-common/clock.c
new file mode 100644
index 0000000..9b29ce1
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/clock.c
@@ -0,0 +1,655 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 Clock control functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch-tegra/clk_rst.h>
+#include <asm/arch-tegra/timer.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * Clock types that we can use as a source. The Tegra114 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+ CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
+ CLOCK_TYPE_MCPA, /* and so on */
+ CLOCK_TYPE_MCPT,
+ CLOCK_TYPE_PCM,
+ CLOCK_TYPE_PCMT,
+ CLOCK_TYPE_PCMT16,
+ CLOCK_TYPE_PDCT,
+ CLOCK_TYPE_ACPT,
+ CLOCK_TYPE_ASPTE,
+ CLOCK_TYPE_PMDACD2T,
+ CLOCK_TYPE_PCST,
+
+ CLOCK_TYPE_COUNT,
+ CLOCK_TYPE_NONE = -1, /* invalid clock type */
+};
+
+enum {
+ CLOCK_MAX_MUX = 8 /* number of source options for each clock */
+};
+
+enum {
+ MASK_BITS_31_30 = 2, /* num of bits used to specify clock source */
+ MASK_BITS_31_29,
+ MASK_BITS_29_28,
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code.
+ *
+ * Note:
+ * The extra column in each clock source array is used to store the mask
+ * bits in its register for the source.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
+ { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_30},
+ { CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
+ CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_31_29},
+ { CLK(PERIPH), CLK(MEMORY), CLK(DISPLAY), CLK(AUDIO),
+ CLK(CGENERAL), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
+ MASK_BITS_31_29},
+ { CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
+ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
+ MASK_BITS_29_28}
+};
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+ /* 0x00 */
+ TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
+ TYPE(PERIPHC_PWM, CLOCK_TYPE_PCST), /* only PWM uses b29:28 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC3, CLOCK_TYPE_PCMT),
+
+ /* 0x08 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_I2C5, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_DISP1, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_DISP2, CLOCK_TYPE_PMDACD2T),
+
+ /* 0x10 */
+ TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
+
+ /* 0x18 */
+ TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT), /* MIPI base-band HSI */
+ TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
+
+ /* 0x20 */
+ TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_HDMI, CLOCK_TYPE_PMDACD2T),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
+
+ /* 0x28 */
+ TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SBC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
+
+ /* 0x30 */
+ TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2S0, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+
+ /* 0x38h */ /* Jumps to reg offset 0x3B0h */
+ TYPE(PERIPHC_G3D2, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PCST), /* s/b PCTS */
+ TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2C4, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SBC5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SBC6, CLOCK_TYPE_PCMT),
+
+ /* 0x40 */
+ TYPE(PERIPHC_AUDIO, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_DAM0, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM1, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_DAM2, CLOCK_TYPE_ACPT),
+ TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
+
+ /* 0x48 */
+ TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
+ TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
+ TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PCST), /* MASK 31:30 */
+ TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPEEDO, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+
+ /* 0x50 */
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT), /* offset 0x420h */
+ TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_HDA, CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ * uint vi_sensor; _VI_SENSOR_0, 0x1A8
+ * SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+ /* Low word: 31:0 */
+ NONE(CPU),
+ NONE(COP),
+ NONE(TRIGSYS),
+ NONE(RESERVED3),
+ NONE(RTC),
+ NONE(TMR),
+ PERIPHC_UART1,
+ PERIPHC_UART2, /* and vfir 0x68 */
+
+ /* 8 */
+ NONE(GPIO),
+ PERIPHC_SDMMC2,
+ NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
+ PERIPHC_I2S1,
+ PERIPHC_I2C1,
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC4,
+
+ /* 16 */
+ NONE(RESERVED16),
+ PERIPHC_PWM,
+ PERIPHC_I2S2,
+ PERIPHC_EPP,
+ PERIPHC_VI,
+ PERIPHC_G2D,
+ NONE(USBD),
+ NONE(ISP),
+
+ /* 24 */
+ PERIPHC_G3D,
+ NONE(RESERVED25),
+ PERIPHC_DISP2,
+ PERIPHC_DISP1,
+ PERIPHC_HOST1X,
+ NONE(VCP),
+ PERIPHC_I2S0,
+ NONE(CACHE2),
+
+ /* Middle word: 63:32 */
+ NONE(MEM),
+ NONE(AHBDMA),
+ NONE(APBDMA),
+ NONE(RESERVED35),
+ NONE(RESERVED36),
+ NONE(STAT_MON),
+ NONE(RESERVED38),
+ NONE(RESERVED39),
+
+ /* 40 */
+ NONE(KFUSE),
+ NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ PERIPHC_NOR,
+ NONE(RESERVED43),
+ PERIPHC_SBC2,
+ NONE(RESERVED45),
+ PERIPHC_SBC3,
+ PERIPHC_I2C5,
+
+ /* 48 */
+ NONE(DSI),
+ PERIPHC_TVO, /* also CVE 0x40 */
+ PERIPHC_MIPI,
+ PERIPHC_HDMI,
+ NONE(CSI),
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_UART3,
+
+ /* 56 */
+ NONE(RESERVED56),
+ PERIPHC_EMC,
+ NONE(USB2),
+ NONE(USB3),
+ PERIPHC_MPE,
+ PERIPHC_VDE,
+ NONE(BSEA),
+ NONE(BSEV),
+
+ /* Upper word 95:64 */
+ PERIPHC_SPEEDO,
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_I2C3,
+ PERIPHC_SBC4,
+ PERIPHC_SDMMC3,
+ NONE(PCIE),
+ PERIPHC_OWR,
+
+ /* 72 */
+ NONE(AFI),
+ PERIPHC_CSITE,
+ NONE(PCIEXCLK),
+ NONE(AVPUCQ),
+ NONE(RESERVED76),
+ NONE(RESERVED77),
+ NONE(RESERVED78),
+ NONE(DTV),
+
+ /* 80 */
+ PERIPHC_NANDSPEED,
+ PERIPHC_I2CSLOW,
+ NONE(DSIB),
+ NONE(RESERVED83),
+ NONE(IRAMA),
+ NONE(IRAMB),
+ NONE(IRAMC),
+ NONE(IRAMD),
+
+ /* 88 */
+ NONE(CRAM2),
+ NONE(RESERVED89),
+ NONE(MDOUBLER),
+ NONE(RESERVED91),
+ NONE(SUSOUT),
+ NONE(RESERVED93),
+ NONE(RESERVED94),
+ NONE(RESERVED95),
+
+ /* V word: 31:0 */
+ NONE(CPUG),
+ NONE(CPULP),
+ PERIPHC_G3D2,
+ PERIPHC_MSELECT,
+ PERIPHC_TSENSOR,
+ PERIPHC_I2S3,
+ PERIPHC_I2S4,
+ PERIPHC_I2C4,
+
+ /* 08 */
+ PERIPHC_SBC5,
+ PERIPHC_SBC6,
+ PERIPHC_AUDIO,
+ NONE(APBIF),
+ PERIPHC_DAM0,
+ PERIPHC_DAM1,
+ PERIPHC_DAM2,
+ PERIPHC_HDA2CODEC2X,
+
+ /* 16 */
+ NONE(ATOMICS),
+ NONE(RESERVED17),
+ NONE(RESERVED18),
+ NONE(RESERVED19),
+ NONE(RESERVED20),
+ NONE(RESERVED21),
+ NONE(RESERVED22),
+ PERIPHC_ACTMON,
+
+ /* 24 */
+ NONE(RESERVED24),
+ NONE(RESERVED25),
+ NONE(RESERVED26),
+ NONE(RESERVED27),
+ PERIPHC_SATA,
+ PERIPHC_HDA,
+ NONE(RESERVED30),
+ NONE(RESERVED31),
+
+ /* W word: 31:0 */
+ NONE(HDA2HDMICODEC),
+ NONE(RESERVED1_SATACOLD),
+ NONE(RESERVED2_PCIERX0),
+ NONE(RESERVED3_PCIERX1),
+ NONE(RESERVED4_PCIERX2),
+ NONE(RESERVED5_PCIERX3),
+ NONE(RESERVED6_PCIERX4),
+ NONE(RESERVED7_PCIERX5),
+
+ /* 40 */
+ NONE(CEC),
+ NONE(PCIE2_IOBIST),
+ NONE(EMC_IOBIST),
+ NONE(HDMI_IOBIST),
+ NONE(SATA_IOBIST),
+ NONE(MIPI_IOBIST),
+ NONE(EMC1_IOBIST),
+ NONE(XUSB),
+
+ /* 48 */
+ NONE(CILAB),
+ NONE(CILCD),
+ NONE(CILE),
+ NONE(DSIA_LP),
+ NONE(DSIB_LP),
+ NONE(RESERVED21_ENTROPY),
+ NONE(RESERVED22_W),
+ NONE(RESERVED23_W),
+
+ /* 56 */
+ NONE(RESERVED24_W),
+ NONE(AMX0),
+ NONE(ADX0),
+ NONE(DVFS),
+ NONE(XUSB_SS),
+ NONE(EMC_DLL),
+ NONE(MC1),
+ NONE(EMC1),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field. Note that T30/T114 support 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+
+ if (reg & 1) /* one of the newer freqs */
+ printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
+
+ return reg >> 2; /* Map to most common (T20) freqs */
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ enum periphc_internal_id internal_id;
+
+ /* Coresight is a special case */
+ if (periph_id == PERIPH_ID_CSI)
+ return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
+
+ assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(internal_id != -1);
+ if (internal_id >= PERIPHC_VW_FIRST) {
+ internal_id -= PERIPHC_VW_FIRST;
+ return &clkrst->crc_clk_src_vw[internal_id];
+ } else
+ return &clkrst->crc_clk_src[internal_id];
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+ enum clock_type_id type;
+ enum periphc_internal_id internal_id;
+ int mux;
+
+ assert(clock_periph_id_isvalid(periph_id));
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(periphc_internal_id_isvalid(internal_id));
+
+ type = clock_periph_type[internal_id];
+ assert(clock_type_id_isvalid(type));
+
+ *mux_bits = clock_source[type][CLOCK_MAX_MUX];
+
+ if (type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+ if (clock_source[type][mux] == parent)
+ return mux;
+
+ /* if we get here, either us or the caller has made a mistake */
+ printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+ parent);
+ return -1;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *clk;
+ u32 reg;
+
+ /* Enable/disable the clock to this peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
+ clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+ else
+ clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
+ reg = readl(clk);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, clk);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *reset;
+ u32 reg;
+
+ /* Enable/disable reset to the peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ if (periph_id < PERIPH_ID_VW_FIRST)
+ reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+ else
+ reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
+ reg = readl(reset);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, reset);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id Clock ID according to tegra114 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+enum periph_id clk_id_to_periph_id(int clk_id)
+{
+ if (clk_id > PERIPH_ID_COUNT)
+ return PERIPH_ID_NONE;
+
+ switch (clk_id) {
+ case PERIPH_ID_RESERVED3:
+ case PERIPH_ID_RESERVED16:
+ case PERIPH_ID_RESERVED24:
+ case PERIPH_ID_RESERVED35:
+ case PERIPH_ID_RESERVED43:
+ case PERIPH_ID_RESERVED45:
+ case PERIPH_ID_RESERVED56:
+ case PERIPH_ID_RESERVED76:
+ case PERIPH_ID_RESERVED77:
+ case PERIPH_ID_RESERVED78:
+ case PERIPH_ID_RESERVED83:
+ case PERIPH_ID_RESERVED89:
+ case PERIPH_ID_RESERVED91:
+ case PERIPH_ID_RESERVED93:
+ case PERIPH_ID_RESERVED94:
+ case PERIPH_ID_RESERVED95:
+ return PERIPH_ID_NONE;
+ default:
+ return clk_id;
+ }
+}
+#endif /* CONFIG_OF_CONTROL */
+
+void clock_early_init(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+ /*
+ * PLLP output frequency set to 408Mhz
+ * PLLC output frequency set to 600Mhz
+ * PLLD output frequency set to 925Mhz
+ */
+ switch (clock_get_osc_freq()) {
+ case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 12, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
+ break;
+
+ case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 26, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
+ break;
+
+ case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 408, 13, 0, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+ clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
+ break;
+ case CLOCK_OSC_FREQ_19_2:
+ default:
+ /*
+ * These are not supported. It is too early to print a
+ * message and the UART likely won't work anyway due to the
+ * oscillator being wrong.
+ */
+ break;
+ }
+
+ /* PLLC_MISC2: Set dynramp_stepA/B. MISC2 maps to pll_out[1] */
+ writel(0x00561600, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1]);
+
+ /* PLLC_MISC: Set LOCK_ENABLE */
+ writel(0x01000000, &clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc);
+ udelay(2);
+
+ /* PLLD_MISC: Set CLKENABLE, CPCON 12, LFCON 1 */
+ writel(0x40000C10, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
+ udelay(2);
+}
diff --git a/arch/arm/cpu/tegra114-common/funcmux.c b/arch/arm/cpu/tegra114-common/funcmux.c
new file mode 100644
index 0000000..5af7550
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/funcmux.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 high-level function multiplexing */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+ int bad_config = config != FUNCMUX_DEFAULT;
+
+ switch (id) {
+ case PERIPH_ID_UART4:
+ switch (config) {
+ case FUNCMUX_UART4_GMI:
+ pinmux_set_func(PINGRP_GMI_A16, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A17, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A18, PMUX_FUNC_UARTD);
+ pinmux_set_func(PINGRP_GMI_A19, PMUX_FUNC_UARTD);
+
+ pinmux_set_io(PINGRP_GMI_A16, PMUX_PIN_OUTPUT);
+ pinmux_set_io(PINGRP_GMI_A17, PMUX_PIN_INPUT);
+ pinmux_set_io(PINGRP_GMI_A18, PMUX_PIN_INPUT);
+ pinmux_set_io(PINGRP_GMI_A19, PMUX_PIN_OUTPUT);
+
+ pinmux_tristate_disable(PINGRP_GMI_A16);
+ pinmux_tristate_disable(PINGRP_GMI_A17);
+ pinmux_tristate_disable(PINGRP_GMI_A18);
+ pinmux_tristate_disable(PINGRP_GMI_A19);
+ break;
+ }
+ break;
+
+ /* Add other periph IDs here as needed */
+
+ default:
+ debug("%s: invalid periph_id %d", __func__, id);
+ return -1;
+ }
+
+ if (bad_config) {
+ debug("%s: invalid config %d for periph_id %d", __func__,
+ config, id);
+ return -1;
+ }
+ return 0;
+}
diff --git a/arch/arm/cpu/tegra114-common/pinmux.c b/arch/arm/cpu/tegra114-common/pinmux.c
new file mode 100644
index 0000000..52b3ec4
--- /dev/null
+++ b/arch/arm/cpu/tegra114-common/pinmux.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra114 pin multiplexing functions */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra.h>
+#include <asm/arch/pinmux.h>
+
+struct tegra_pingroup_desc {
+ const char *name;
+ enum pmux_func funcs[4];
+ enum pmux_func func_safe;
+ enum pmux_vddio vddio;
+ enum pmux_pin_io io;
+};
+
+#define PMUX_MUXCTL_SHIFT 0
+#define PMUX_PULL_SHIFT 2
+#define PMUX_TRISTATE_SHIFT 4
+#define PMUX_TRISTATE_MASK (1 << PMUX_TRISTATE_SHIFT)
+#define PMUX_IO_SHIFT 5
+#define PMUX_OD_SHIFT 6
+#define PMUX_LOCK_SHIFT 7
+#define PMUX_IO_RESET_SHIFT 8
+
+/* Convenient macro for defining pin group properties */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, iod) \
+ { \
+ .vddio = PMUX_VDDIO_ ## vdd, \
+ .funcs = { \
+ PMUX_FUNC_ ## f0, \
+ PMUX_FUNC_ ## f1, \
+ PMUX_FUNC_ ## f2, \
+ PMUX_FUNC_ ## f3, \
+ }, \
+ .func_safe = PMUX_FUNC_RSVD1, \
+ .io = PMUX_PIN_ ## iod, \
+ }
+
+/* Input and output pins */
+#define PINI(pg_name, vdd, f0, f1, f2, f3) \
+ PIN(pg_name, vdd, f0, f1, f2, f3, INPUT)
+#define PINO(pg_name, vdd, f0, f1, f2, f3) \
+ PIN(pg_name, vdd, f0, f1, f2, f3, OUTPUT)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+ /* NAME VDD f0 f1 f2 f3 */
+ PINI(ULPI_DATA0, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA1, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA2, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA3, BB, SPI3, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA4, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA5, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA6, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_DATA7, BB, SPI2, HSI, UARTA, ULPI),
+ PINI(ULPI_CLK, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_DIR, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_NXT, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(ULPI_STP, BB, SPI1, SPI5, UARTD, ULPI),
+ PINI(DAP3_FS, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_DIN, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_DOUT, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(DAP3_SCLK, BB, I2S2, SPI5, DISPA, DISPB),
+ PINI(GPIO_PV0, BB, USB, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PV1, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC1_CLK, SDMMC1, SDMMC1, CLK12, RSVD3, RSVD4),
+ PINI(SDMMC1_CMD, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA),
+ PINI(SDMMC1_DAT3, SDMMC1, SDMMC1, SPDIF, SPI4, UARTA),
+ PINI(SDMMC1_DAT2, SDMMC1, SDMMC1, PWM0, SPI4, UARTA),
+ PINI(SDMMC1_DAT1, SDMMC1, SDMMC1, PWM1, SPI4, UARTA),
+ PINI(SDMMC1_DAT0, SDMMC1, SDMMC1, RSVD2, SPI4, UARTA),
+ PINI(GPIO_PV2, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PV3, BB, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(CLK2_OUT, SDMMC1, EXTPERIPH2, RSVD2, RSVD3, RSVD4),
+ PINI(CLK2_REQ, SDMMC1, DAP, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SDIN, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SDOUT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_WR_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_CS0_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DC0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_SCK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PWR0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_PCLK, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DE, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D0, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D2, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D3, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D4, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D5, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D6, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D7, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D8, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D9, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D10, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D11, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D12, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D13, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D14, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D15, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D16, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D17, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D18, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D19, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D20, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D21, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D22, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_D23, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_CS1_N, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_M1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINO(LCD_DC1, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(HDMI_INT, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(DDC_SCL, LCD, I2C4, RSVD2, RSVD3, RSVD4),
+ PINI(DDC_SDA, LCD, I2C4, RSVD2, RSVD3, RSVD4),
+ PINI(CRT_HSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(CRT_VSYNC, LCD, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D0, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D1, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D2, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D3, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D4, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D5, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D6, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D7, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D8, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D9, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D10, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_D11, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_PCLK, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_MCLK, VI, RSVD1, RSVD3, RSVD3, RSVD4),
+ PINI(VI_VSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(VI_HSYNC, VI, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(UART2_RXD, UART, UARTB, SPDIF, UARTA, SPI4),
+ PINI(UART2_TXD, UART, UARTB, SPDIF, UARTA, SPI4),
+ PINI(UART2_RTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
+ PINI(UART2_CTS_N, UART, UARTA, UARTB, RSVD3, SPI4),
+ PINI(UART3_TXD, UART, UARTC, RSVD2, RSVD3, SPI4),
+ PINI(UART3_RXD, UART, UARTC, RSVD2, RSVD3, SPI4),
+ PINI(UART3_CTS_N, UART, UARTC, SDMMC1, DTV, SPI4),
+ PINI(UART3_RTS_N, UART, UARTC, PWM0, DTV, DISPA),
+ PINI(GPIO_PU0, UART, OWR, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU1, UART, RSVD1, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU2, UART, RSVD1, UARTA, RSVD3, RSVD4),
+ PINI(GPIO_PU3, UART, PWM0, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU4, UART, PWM1, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU5, UART, PWM2, UARTA, DISPA, DISPB),
+ PINI(GPIO_PU6, UART, PWM3, UARTA, USB, DISPB),
+ PINI(GEN1_I2C_SDA, UART, I2C1, RSVD2, RSVD3, RSVD4),
+ PINI(GEN1_I2C_SCL, UART, I2C1, RSVD2, RSVD3, RSVD4),
+ PINI(DAP4_FS, UART, I2S3, RSVD2, DTV, RSVD4),
+ PINI(DAP4_DIN, UART, I2S3, RSVD2, RSVD3, RSVD4),
+ PINI(DAP4_DOUT, UART, I2S3, RSVD2, DTV, RSVD4),
+ PINI(DAP4_SCLK, UART, I2S3, RSVD2, RSVD3, RSVD4),
+ PINI(CLK3_OUT, UART, EXTPERIPH3, RSVD2, RSVD3, RSVD4),
+ PINI(CLK3_REQ, UART, DEV3, RSVD2, RSVD3, RSVD4),
+ PINI(GMI_WP_N, GMI, RSVD1, NAND, GMI, GMI_ALT),
+ PINI(GMI_IORDY, GMI, SDMMC2, RSVD2, GMI, TRACE),
+ PINI(GMI_WAIT, GMI, SPI4, NAND, GMI, DTV),
+ PINI(GMI_ADV_N, GMI, RSVD1, NAND, GMI, TRACE),
+ PINI(GMI_CLK, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_CS0_N, GMI, RSVD1, NAND, GMI, USB),
+ PINI(GMI_CS1_N, GMI, RSVD1, NAND, GMI, SOC),
+ PINI(GMI_CS2_N, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_CS3_N, GMI, SDMMC2, NAND, GMI, GMI_ALT),
+ PINI(GMI_CS4_N, GMI, USB, NAND, GMI, TRACE),
+ PINI(GMI_CS6_N, GMI, NAND, NAND_ALT, GMI, SPI4),
+ PINI(GMI_CS7_N, GMI, NAND, NAND_ALT, GMI, SDMMC2),
+ PINI(GMI_AD0, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD1, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD2, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD3, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD4, GMI, RSVD1, NAND, GMI, RSVD4),
+ PINI(GMI_AD5, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD6, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD7, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_AD8, GMI, PWM0, NAND, GMI, DTV),
+ PINI(GMI_AD9, GMI, PWM1, NAND, GMI, CLDVFS),
+ PINI(GMI_AD10, GMI, PWM2, NAND, GMI, CLDVFS),
+ PINI(GMI_AD11, GMI, PWM3, NAND, GMI, USB),
+ PINI(GMI_AD12, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(GMI_AD13, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINI(GMI_AD14, GMI, SDMMC2, NAND, GMI, DTV),
+ PINI(GMI_AD15, GMI, SDMMC2, NAND, GMI, DTV),
+ PINI(GMI_A16, GMI, UARTD, TRACE, GMI, GMI_ALT),
+ PINI(GMI_A17, GMI, UARTD, RSVD2, GMI, TRACE),
+ PINI(GMI_A18, GMI, UARTD, RSVD2, GMI, TRACE),
+ PINI(GMI_A19, GMI, UARTD, SPI4, GMI, TRACE),
+ PINI(GMI_WR_N, GMI, RSVD1, NAND, GMI, SPI4),
+ PINI(GMI_OE_N, GMI, RSVD1, NAND, GMI, SOC),
+ PINI(GMI_DQS, GMI, SDMMC2, NAND, GMI, TRACE),
+ PINI(GMI_RST_N, GMI, NAND, NAND_ALT, GMI, RSVD4),
+ PINI(GEN2_I2C_SCL, GMI, I2C2, RSVD2, GMI, RSVD4),
+ PINI(GEN2_I2C_SDA, GMI, I2C2, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_CLK, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_CMD, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_DAT0, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT1, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT2, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT3, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT4, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT5, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT6, SDMMC4, SDMMC4, SPI3, GMI, RSVD4),
+ PINI(SDMMC4_DAT7, SDMMC4, SDMMC4, RSVD2, GMI, RSVD4),
+ PINI(SDMMC4_RST_N, SDMMC4, RSVD1, RSVD2, RSVD3, SDMMC4),
+ PINI(CAM_MCLK, CAM, VI, VI_ALT1, VI_ALT2, RSVD4),
+ PINI(GPIO_PCC1, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PBB0, CAM, I2S4, VI, VI_ALT1, VI_ALT3),
+ PINI(CAM_I2C_SCL, CAM, VGP1, I2C3, RSVD3, RSVD4),
+ PINI(CAM_I2C_SDA, CAM, VGP2, I2C3, RSVD3, RSVD4),
+ PINI(GPIO_PBB3, CAM, VGP3, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB4, CAM, VGP4, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB5, CAM, VGP5, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB6, CAM, VGP6, DISPA, DISPB, RSVD4),
+ PINI(GPIO_PBB7, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(GPIO_PCC2, CAM, I2S4, RSVD2, RSVD3, RSVD4),
+ PINI(JTAG_RTCK, SYS, RTCK, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_I2C_SCL, SYS, I2CPWR, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_I2C_SDA, SYS, I2CPWR, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW0, SYS, KBC, RSVD2, DTV, RSVD4),
+ PINI(KB_ROW1, SYS, KBC, RSVD2, DTV, RSVD4),
+ PINI(KB_ROW2, SYS, KBC, RSVD2, DTV, SOC),
+ PINI(KB_ROW3, SYS, KBC, DISPA, RSVD3, DISPB),
+ PINI(KB_ROW4, SYS, KBC, DISPA, SPI2, DISPB),
+ PINI(KB_ROW5, SYS, KBC, DISPA, SPI2, DISPB),
+ PINI(KB_ROW6, SYS, KBC, DISPA, RSVD3, DISPB),
+ PINI(KB_ROW7, SYS, KBC, RSVD2, CLDVFS, UARTA),
+ PINI(KB_ROW8, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW9, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW10, SYS, KBC, RSVD2, RSVD3, UARTA),
+ PINI(KB_ROW11, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW12, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW13, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW14, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_ROW15, SYS, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(KB_COL0, SYS, KBC, USB, SPI2, EMC_DLL),
+ PINI(KB_COL1, SYS, KBC, RSVD2, SPI2, EMC_DLL),
+ PINI(KB_COL2, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(KB_COL3, SYS, KBC, DISPA, PWM2, UARTA),
+ PINI(KB_COL4, SYS, KBC, OWR, SDMMC3, UARTA),
+ PINI(KB_COL5, SYS, KBC, RSVD2, SDMMC1, RSVD4),
+ PINI(KB_COL6, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(KB_COL7, SYS, KBC, RSVD2, SPI2, RSVD4),
+ PINI(CLK_32K_OUT, SYS, BLINK, SOC, RSVD3, RSVD4),
+ PINI(SYS_CLK_REQ, SYS, SYSCLK, RSVD2, RSVD3, RSVD4),
+ PINI(CORE_PWR_REQ, SYS, PWRON, RSVD2, RSVD3, RSVD4),
+ PINI(CPU_PWR_REQ, SYS, CPU, RSVD2, RSVD3, RSVD4),
+ PINI(PWR_INT_N, SYS, PMI, RSVD2, RSVD3, RSVD4),
+ PINI(CLK_32K_IN, SYS, CLK, RSVD2, RSVD3, RSVD4),
+ PINI(OWR, SYS, OWR, RSVD2, RSVD3, RSVD4),
+ PINI(DAP1_FS, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_DIN, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_DOUT, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(DAP1_SCLK, AUDIO, I2S0, HDA, GMI, RSVD4),
+ PINI(CLK1_REQ, AUDIO, DAP, DAP1, RSVD3, RSVD4),
+ PINI(CLK1_OUT, AUDIO, EXTPERIPH1, DAP2, RSVD3, RSVD4),
+ PINI(SPDIF_IN, AUDIO, SPDIF, USB, RSVD3, RSVD4),
+ PINI(SPDIF_OUT, AUDIO, SPDIF, RSVD2, RSVD3, RSVD4),
+ PINI(DAP2_FS, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_DIN, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_DOUT, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(DAP2_SCLK, AUDIO, I2S1, HDA, RSVD3, RSVD4),
+ PINI(SPI2_MOSI, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(SPI2_MISO, AUDIO, SPI6, RSVD2, RSVD3, RSVD4),
+ PINI(SPI2_CS0_N, AUDIO, SPI6, SPI1, RSVD3, RSVD4),
+ PINI(SPI2_SCK, AUDIO, SPI6, CLDVFS, RSVD3, RSVD4),
+ PINI(SPI1_MOSI, AUDIO, RSVD1, SPI1, SPI2, DAP2),
+ PINI(SPI1_SCK, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(SPI1_CS0_N, AUDIO, SPI6, SPI1, SPI2, RSVD4),
+ PINI(SPI1_MISO, AUDIO, RSVD1, SPI1, SPI2, RSVD4),
+ PINI(SPI2_CS1_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SPI2_CS2_N, AUDIO, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CLK, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
+ PINI(SDMMC3_CMD, SDMMC3, SDMMC3, PWM3, UARTA, SPI3),
+ PINI(SDMMC3_DAT0, SDMMC3, SDMMC3, RSVD2, RSVD3, SPI3),
+ PINI(SDMMC3_DAT1, SDMMC3, SDMMC3, PWM2, UARTA, SPI3),
+ PINI(SDMMC3_DAT2, SDMMC3, SDMMC3, PWM1, DISPA, SPI3),
+ PINI(SDMMC3_DAT3, SDMMC3, SDMMC3, PWM0, DISPB, SPI3),
+ PINI(SDMMC3_DAT4, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT5, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT6, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_DAT7, SDMMC3, RSVD1, RSVD2, RSVD3, RSVD4),
+ PINI(HDMI_CEC, SYS, CEC, SDMMC3, RSVD3, SOC),
+ PINI(SDMMC1_WP_N, SDMMC1, SDMMC1, CLK12, SPI4, UARTA),
+ PINI(SDMMC3_CD_N, SDMMC3, SDMMC3, OWR, RSVD3, RSVD4),
+ PINI(SPI1_CS1_N, AUDIO, SPI6, RSVD2, SPI2, I2C1),
+ PINI(SPI1_CS2_N, AUDIO, SPI6, SPI1, SPI2, I2C1),
+ PINI(USB_VBUS_EN0, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(USB_VBUS_EN1, SYS, USB, RSVD2, RSVD3, RSVD4),
+ PINI(SDMMC3_CLK_LB_IN, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PINO(SDMMC3_CLK_LB_OUT, SDMMC3, SDMMC3, RSVD2, RSVD3, RSVD4),
+ PINO(NAND_GMI_CLK_LB, GMI, SDMMC2, NAND, GMI, RSVD4),
+ PINO(RESET_OUT_N, SYS, RSVD1, RSVD2, RSVD3, RESET_OUT_N),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *tri = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin */
+ assert(pmux_pingrp_isvalid(pin));
+
+ reg = readl(tri);
+ if (enable)
+ reg |= PMUX_TRISTATE_MASK;
+ else
+ reg &= ~PMUX_TRISTATE_MASK;
+ writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pull = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and pupd */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_pupd_isvalid(pupd));
+
+ reg = readl(pull);
+ reg &= ~(0x3 << PMUX_PULL_SHIFT);
+ reg |= (pupd << PMUX_PULL_SHIFT);
+ writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *muxctl = &pmt->pmt_ctl[pin];
+ int i, mux = -1;
+ u32 reg;
+
+ /* Error check on pin and func */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_func_isvalid(func));
+
+ /* Handle special values */
+ if (func == PMUX_FUNC_SAFE)
+ func = tegra_soc_pingroups[pin].func_safe;
+
+ if (func & PMUX_FUNC_RSVD1) {
+ mux = func & 0x3;
+ } else {
+ /* Search for the appropriate function */
+ for (i = 0; i < 4; i++) {
+ if (tegra_soc_pingroups[pin].funcs[i] == func) {
+ mux = i;
+ break;
+ }
+ }
+ }
+ assert(mux != -1);
+
+ reg = readl(muxctl);
+ reg &= ~(0x3 << PMUX_MUXCTL_SHIFT);
+ reg |= (mux << PMUX_MUXCTL_SHIFT);
+ writel(reg, muxctl);
+
+}
+
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_io = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and io */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_io_isvalid(io));
+
+ reg = readl(pin_io);
+ reg &= ~(0x1 << PMUX_IO_SHIFT);
+ reg |= (io & 0x1) << PMUX_IO_SHIFT;
+ writel(reg, pin_io);
+}
+
+static int pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_lock = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and lock */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_lock_isvalid(lock));
+
+ if (lock == PMUX_PIN_LOCK_DEFAULT)
+ return 0;
+
+ reg = readl(pin_lock);
+ reg &= ~(0x1 << PMUX_LOCK_SHIFT);
+ if (lock == PMUX_PIN_LOCK_ENABLE)
+ reg |= (0x1 << PMUX_LOCK_SHIFT);
+ else {
+ /* lock == DISABLE, which isn't possible */
+ printf("%s: Warning: lock == %d, DISABLE is not allowed!\n",
+ __func__, lock);
+ }
+ writel(reg, pin_lock);
+
+ return 0;
+}
+
+static int pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_od = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and od */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_od_isvalid(od));
+
+ if (od == PMUX_PIN_OD_DEFAULT)
+ return 0;
+
+ reg = readl(pin_od);
+ reg &= ~(0x1 << PMUX_OD_SHIFT);
+ if (od == PMUX_PIN_OD_ENABLE)
+ reg |= (0x1 << PMUX_OD_SHIFT);
+ writel(reg, pin_od);
+
+ return 0;
+}
+
+static int pinmux_set_ioreset(enum pmux_pingrp pin,
+ enum pmux_pin_ioreset ioreset)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *pin_ioreset = &pmt->pmt_ctl[pin];
+ u32 reg;
+
+ /* Error check on pin and ioreset */
+ assert(pmux_pingrp_isvalid(pin));
+ assert(pmux_pin_ioreset_isvalid(ioreset));
+
+ if (ioreset == PMUX_PIN_IO_RESET_DEFAULT)
+ return 0;
+
+ reg = readl(pin_ioreset);
+ reg &= ~(0x1 << PMUX_IO_RESET_SHIFT);
+ if (ioreset == PMUX_PIN_IO_RESET_ENABLE)
+ reg |= (0x1 << PMUX_IO_RESET_SHIFT);
+ writel(reg, pin_ioreset);
+
+ return 0;
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+ enum pmux_pingrp pin = config->pingroup;
+
+ pinmux_set_func(pin, config->func);
+ pinmux_set_pullupdown(pin, config->pull);
+ pinmux_set_tristate(pin, config->tristate);
+ pinmux_set_io(pin, config->io);
+ pinmux_set_lock(pin, config->lock);
+ pinmux_set_od(pin, config->od);
+ pinmux_set_ioreset(pin, config->ioreset);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ pinmux_config_pingroup(&config[i]);
+}
--
1.7.0.4
next prev parent reply other threads:[~2013-01-28 23:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-28 23:32 [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 2/7] Tegra114: Add AVP (arm720t) files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 3/7] Tegra114: Add CPU (armv7) files Tom Warren
2013-01-28 23:32 ` Tom Warren [this message]
2013-01-28 23:32 ` [U-Boot] [PATCH v3 5/7] Tegra114: Dalmore: Add DT files Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 6/7] Tegra114: Add generic Tegra114 build support Tom Warren
2013-01-28 23:32 ` [U-Boot] [PATCH v3 7/7] Tegra114: Add/enable Dalmore build (T114 reference board) Tom Warren
2013-02-02 1:06 ` Allen Martin
2013-01-29 0:43 ` [U-Boot] [PATCH v3 1/7] Tegra114: Add arch-tegra114 include files Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1359415933-30002-4-git-send-email-twarren@nvidia.com \
--to=twarren.nvidia@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.