From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>,
"Jett.Zhou" <jtzhou@marvell.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RESEND 1/3] regulator: core: Add enable_is_inverted flag to indicate set enable_mask bits to disable
Date: Tue, 05 Mar 2013 14:16:00 +0800 [thread overview]
Message-ID: <1362464160.1111.1.camel@phoenix> (raw)
Add enable_is_inverted flag to indicate set enable_mask bits to disable
when using regulator_enable_regmap and friends APIs.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@gmail.com>
---
This patch was sent on https://lkml.org/lkml/2013/2/16/14.
This resend is against linux-next tree (20130305).
drivers/regulator/core.c | 24 ++++++++++++++++++++----
include/linux/regulator/driver.h | 3 +++
2 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index cea0217..d420c8f 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1905,7 +1905,10 @@ int regulator_is_enabled_regmap(struct regulator_dev *rdev)
if (ret != 0)
return ret;
- return (val & rdev->desc->enable_mask) != 0;
+ if (rdev->desc->enable_is_inverted)
+ return (val & rdev->desc->enable_mask) == 0;
+ else
+ return (val & rdev->desc->enable_mask) != 0;
}
EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
@@ -1920,9 +1923,15 @@ EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
*/
int regulator_enable_regmap(struct regulator_dev *rdev)
{
+ unsigned int val;
+
+ if (rdev->desc->enable_is_inverted)
+ val = 0;
+ else
+ val = rdev->desc->enable_mask;
+
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask,
- rdev->desc->enable_mask);
+ rdev->desc->enable_mask, val);
}
EXPORT_SYMBOL_GPL(regulator_enable_regmap);
@@ -1937,8 +1946,15 @@ EXPORT_SYMBOL_GPL(regulator_enable_regmap);
*/
int regulator_disable_regmap(struct regulator_dev *rdev)
{
+ unsigned int val;
+
+ if (rdev->desc->enable_is_inverted)
+ val = rdev->desc->enable_mask;
+ else
+ val = 0;
+
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, 0);
+ rdev->desc->enable_mask, val);
}
EXPORT_SYMBOL_GPL(regulator_disable_regmap);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index a741bb6..5e2d13d 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -200,6 +200,8 @@ enum regulator_type {
* output when using regulator_set_voltage_sel_regmap
* @enable_reg: Register for control when using regmap enable/disable ops
* @enable_mask: Mask for control when using regmap enable/disable ops
+ * @enable_is_inverted: A flag to indicate set enable_mask bits to disable
+ * when using regulator_enable_regmap and friends APIs.
* @bypass_reg: Register for control when using regmap set_bypass
* @bypass_mask: Mask for control when using regmap set_bypass
*
@@ -229,6 +231,7 @@ struct regulator_desc {
unsigned int apply_bit;
unsigned int enable_reg;
unsigned int enable_mask;
+ bool enable_is_inverted;
unsigned int bypass_reg;
unsigned int bypass_mask;
--
1.7.9.5
next reply other threads:[~2013-03-05 6:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-05 6:16 Axel Lin [this message]
2013-03-05 6:16 ` [PATCH RESEND 2/3] regulator: 88pm8607: Use enable_is_inverted flag with regulator_enable_regmap and friends APIs Axel Lin
2013-03-05 6:17 ` [PATCH RESEND 3/3] regulator: max8649: " Axel Lin
2013-03-05 7:03 ` [PATCH RESEND 1/3] regulator: core: Add enable_is_inverted flag to indicate set enable_mask bits to disable Mark Brown
2013-03-05 7:09 ` Axel Lin
2013-03-05 10:00 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362464160.1111.1.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=haojian.zhuang@gmail.com \
--cc=jtzhou@marvell.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.