All of lore.kernel.org
 help / color / mirror / Atom feed
From: Scott Wood <scottwood@freescale.com>
To: Stuart Yoder <stuart.yoder@freescale.com>
Cc: linuxppc-dev@lists.ozlabs.org, Stuart Yoder <stuart.yoder@freescale.com>
Subject: Re: [PATCH][v2] powerpc/e6500: Add Power ISA properties for e6500 cores
Date: Tue, 5 Mar 2013 14:29:16 -0600	[thread overview]
Message-ID: <1362515356.25308.8@snotra> (raw)
In-Reply-To: <1362514602-17920-1-git-send-email-stuart.yoder@freescale.com> (from stuart.yoder@freescale.com on Tue Mar  5 14:16:42 2013)

On 03/05/2013 02:16:42 PM, Stuart Yoder wrote:
> From: Stuart Yoder <stuart.yoder@freescale.com>
>=20
> Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
> ---
> -v2
>    -fix some typos
>=20
>  arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi |   65 =20
> ++++++++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
>=20
> diff --git a/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi =20
> b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
> new file mode 100644
> index 0000000..6b4d16a
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/fsl/e6500_power_isa.dtsi
> @@ -0,0 +1,65 @@
> +/*
> + * e6500 Power ISA Device Tree Source (include)
> + *
> + * Copyright 2013 Freescale Semiconductor Inc.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following =20
> conditions are met:
> + *     * Redistributions of source code must retain the above =20
> copyright
> + *       notice, this list of conditions and the following =20
> disclaimer.
> + *     * Redistributions in binary form must reproduce the above =20
> copyright
> + *       notice, this list of conditions and the following =20
> disclaimer in the
> + *       documentation and/or other materials provided with the =20
> distribution.
> + *     * Neither the name of Freescale Semiconductor nor the
> + *       names of its contributors may be used to endorse or promote =20
> products
> + *       derived from this software without specific prior written =20
> permission.
> + *
> + *
> + * ALTERNATIVELY, this software may be distributed under the terms =20
> of the
> + * GNU General Public License ("GPL") as published by the Free =20
> Software
> + * Foundation, either version 2 of that License or (at your option) =20
> any
> + * later version.
> + *
> + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND =20
> ANY
> + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE =20
> IMPLIED
> + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR =20
> PURPOSE ARE
> + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE =20
> FOR ANY
> + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR =20
> CONSEQUENTIAL DAMAGES
> + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS =20
> OR SERVICES;
> + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER =20
> CAUSED AND
> + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT =20
> LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE =20
> USE OF THIS
> + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/ {
> +	cpus {
> +		power-isa-version =3D "2.06";
> +		power-isa-b;		// Base
> +		power-isa-e;		// Embedded
> +		power-isa-atb;		// Alternate Time Base
> +		power-isa-cs;		// Cache Specification
> +		power-isa-ds;		// Decorated Storage
> +		power-isa-e.ed;		// Embedded.Enhanced Debug
> +		power-isa-e.pd;		// Embedded.External PID
> +		power-isa-e.hv;		// Embedded.Hypervisor
> +		power-isa-e.le;		// Embedded.Little-Endian
> +		power-isa-e.pm;		// Embedded.Performance Monitor
> +		power-isa-e.pc;		// Embedded.Processor Control
> +		power-isa-ecl;		// Embedded Cache Locking
> +		power-isa-exp;		// External Proxy
> +		power-isa-fp;		// Floating Point
> +		power-isa-fp.r;		// Floating Point.Record
> +		power-isa-mmc;		// Memory Coherence
> +		power-isa-scpm;		// Store Conditional Page =20
> Mobility
> +		power-isa-wt;		// Wait
> +		power-isa-64;		// 64-bit
> +		power-isa-e.pt;		// Embedded.Page Table
> +		power-isa-e.hv.lrat;	// Embedded.Hypervisor.LRAT
> +		power-isa-e.em;		// Embedded Multi-Threading
> +		power-isa-v;		// Vector (AltiVec)
> +		power-isa-er;		// Enhanced Reservations (Load =20
> and Reserve and Store Cond.)
> +		power-isa-deo;		// Data Cache Extended =20
> Operations

ER and DEO are FSL EREF categories, not Power ISA categories.

-Scott=

  reply	other threads:[~2013-03-05 20:29 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-03-05 20:16 [PATCH][v2] powerpc/e6500: Add Power ISA properties for e6500 cores Stuart Yoder
2013-03-05 20:29 ` Scott Wood [this message]
2013-03-05 20:37   ` Yoder Stuart-B08248
2013-03-05 20:47     ` Scott Wood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1362515356.25308.8@snotra \
    --to=scottwood@freescale.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=stuart.yoder@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.