From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>,
Liam Girdwood <liam.r.girdwood@intel.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/4] mfd: wm5102: Map in additional FLL control registers
Date: Wed, 6 Mar 2013 14:28:14 +0800 [thread overview]
Message-ID: <1362551296-14920-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1362551296-14920-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm5102-tables.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c
index f3c2e9a..768fd42 100644
--- a/drivers/mfd/wm5102-tables.c
+++ b/drivers/mfd/wm5102-tables.c
@@ -291,12 +291,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000176, 0x0000 }, /* R374 - FLL1 Control 6 */
{ 0x00000177, 0x0181 }, /* R375 - FLL1 Loop Filter Test 1 */
{ 0x00000178, 0x0000 }, /* R376 - FLL1 NCO Test 0 */
+ { 0x00000179, 0x0000 }, /* R377 - FLL1 Control 7 */
{ 0x00000181, 0x0000 }, /* R385 - FLL1 Synchroniser 1 */
{ 0x00000182, 0x0000 }, /* R386 - FLL1 Synchroniser 2 */
{ 0x00000183, 0x0000 }, /* R387 - FLL1 Synchroniser 3 */
{ 0x00000184, 0x0000 }, /* R388 - FLL1 Synchroniser 4 */
{ 0x00000185, 0x0000 }, /* R389 - FLL1 Synchroniser 5 */
{ 0x00000186, 0x0000 }, /* R390 - FLL1 Synchroniser 6 */
+ { 0x00000187, 0x0001 }, /* R391 - FLL1 Synchroniser 7 */
{ 0x00000189, 0x0000 }, /* R393 - FLL1 Spread Spectrum */
{ 0x0000018A, 0x0004 }, /* R394 - FLL1 GPIO Clock */
{ 0x00000191, 0x0000 }, /* R401 - FLL2 Control 1 */
@@ -307,12 +309,14 @@ static const struct reg_default wm5102_reg_default[] = {
{ 0x00000196, 0x0000 }, /* R406 - FLL2 Control 6 */
{ 0x00000197, 0x0000 }, /* R407 - FLL2 Loop Filter Test 1 */
{ 0x00000198, 0x0000 }, /* R408 - FLL2 NCO Test 0 */
+ { 0x00000199, 0x0000 }, /* R409 - FLL2 Control 7 */
{ 0x000001A1, 0x0000 }, /* R417 - FLL2 Synchroniser 1 */
{ 0x000001A2, 0x0000 }, /* R418 - FLL2 Synchroniser 2 */
{ 0x000001A3, 0x0000 }, /* R419 - FLL2 Synchroniser 3 */
{ 0x000001A4, 0x0000 }, /* R420 - FLL2 Synchroniser 4 */
{ 0x000001A5, 0x0000 }, /* R421 - FLL2 Synchroniser 5 */
{ 0x000001A6, 0x0000 }, /* R422 - FLL2 Synchroniser 6 */
+ { 0x000001A7, 0x0001 }, /* R423 - FLL2 Synchroniser 7 */
{ 0x000001A9, 0x0000 }, /* R425 - FLL2 Spread Spectrum */
{ 0x000001AA, 0x0004 }, /* R426 - FLL2 GPIO Clock */
{ 0x00000200, 0x0006 }, /* R512 - Mic Charge Pump 1 */
@@ -1056,12 +1060,14 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL1_CONTROL_6:
case ARIZONA_FLL1_LOOP_FILTER_TEST_1:
case ARIZONA_FLL1_NCO_TEST_0:
+ case ARIZONA_FLL1_CONTROL_7:
case ARIZONA_FLL1_SYNCHRONISER_1:
case ARIZONA_FLL1_SYNCHRONISER_2:
case ARIZONA_FLL1_SYNCHRONISER_3:
case ARIZONA_FLL1_SYNCHRONISER_4:
case ARIZONA_FLL1_SYNCHRONISER_5:
case ARIZONA_FLL1_SYNCHRONISER_6:
+ case ARIZONA_FLL1_SYNCHRONISER_7:
case ARIZONA_FLL1_SPREAD_SPECTRUM:
case ARIZONA_FLL1_GPIO_CLOCK:
case ARIZONA_FLL2_CONTROL_1:
@@ -1072,12 +1078,14 @@ static bool wm5102_readable_register(struct device *dev, unsigned int reg)
case ARIZONA_FLL2_CONTROL_6:
case ARIZONA_FLL2_LOOP_FILTER_TEST_1:
case ARIZONA_FLL2_NCO_TEST_0:
+ case ARIZONA_FLL2_CONTROL_7:
case ARIZONA_FLL2_SYNCHRONISER_1:
case ARIZONA_FLL2_SYNCHRONISER_2:
case ARIZONA_FLL2_SYNCHRONISER_3:
case ARIZONA_FLL2_SYNCHRONISER_4:
case ARIZONA_FLL2_SYNCHRONISER_5:
case ARIZONA_FLL2_SYNCHRONISER_6:
+ case ARIZONA_FLL2_SYNCHRONISER_7:
case ARIZONA_FLL2_SPREAD_SPECTRUM:
case ARIZONA_FLL2_GPIO_CLOCK:
case ARIZONA_MIC_CHARGE_PUMP_1:
--
1.7.10.4
next parent reply other threads:[~2013-03-06 6:29 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1362551296-14920-1-git-send-email-broonie@opensource.wolfsonmicro.com>
2013-03-06 6:28 ` Mark Brown [this message]
[not found] ` <20130408162223.GC24058@zurbaran>
2013-04-11 17:22 ` [PATCH 2/4] mfd: wm5102: Map in additional FLL control registers Mark Brown
2013-03-06 6:28 ` [PATCH 3/4] ASoC: arizona: Increase FLL synchroniser bandwidth for high frequencies Mark Brown
2013-03-06 6:28 ` [PATCH 4/4] ASoC: arizona: Optimise FLL loop gains Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362551296-14920-2-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=liam.r.girdwood@intel.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.