From: John Stile <john@stilen.com>
To: buildroot@busybox.net
Subject: [Buildroot] adding dhcpcd
Date: Wed, 06 Mar 2013 17:44:59 -0800 [thread overview]
Message-ID: <1362620699.20183.193.camel@genx> (raw)
In-Reply-To: <CAKcgs2wB=t_PY9hSEc2137Axov5=s8ugLnktRkbWgXBaXsVq2g@mail.gmail.com>
Hello Gilles Talis,
On Wed, 2013-03-06 at 15:48 -0800, Gilles Talis wrote:
> Hi John,
>
> 2013/3/6 John Stile <john@stilen.com>:
> > +define DHCPD_CONFIGURE_CMDS
> > + (cd $@D) && \
> > + $(DHCPCD_PATH) $(DHCPCD_ENV) \
> > + ./configure \
> > + $(CONFIG_ARGS) )
> > +endef
>
> I think there's a small typo here. It should be:
> define DHCPCD_CONFIGURE_CMDS
> instead of
> define DHCPD_CONFIGURE_CMDS
>
> This might make the difference.
>
That did help. Thank you.
The build now fails because it can't find ifaddrs.h:
ipv6.c:34:21: error: ifaddrs.h: No such file or directory
net.c:56:21: error: ifaddrs.h: No such file or directory
But I do see the file here:
./output/toolchain/uClibc-0.9.32/include/ifaddrs.h
Is there a good way to specify the path in my .mk file?
----------------
patch
----------------
Adding pacakge dhcpcd to buildroot
signed-off-by: John Stile <john@stilen.com>
--- a/buildroot-2011.11/package/Config.in 2013-03-06 11:40:52.000000000
-0800
+++ b/buildroot-2011.11/package/Config.in 2013-02-28 14:59:32.000000000
-0800
@@ -409,6 +409,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
source "package/dhcp/Config.in"
endif
source "package/dhcpdump/Config.in"
+source "package/dhcpcd/Config.in"
source "package/dnsmasq/Config.in"
source "package/dropbear/Config.in"
source "package/ebtables/Config.in"
--- a/buildroot-2011.11/package/dhcpcd/Config.in 2013-03-06
11:44:03.000000000 -0800
+++ b/buildroot-2011.11/package/dhcpcd/Config.in 2013-03-06
07:55:53.000000000 -0800
@@ -0,0 +1,5 @@
+config BR2_PACKAGE_DHCPCD
+ bool "dhcpcd"
+ depends on BR2_INET_IPV6
+ help
+ an RFC2131 compliant DHCP client
--- a/buildroot-2011.11/package/dhcpcd/dhcpcd.mk 2013-03-06
17:41:03.000000000 -0800
+++ b/buildroot-2011.11/package/dhcpcd/dhcpcd.mk 2013-03-06
17:38:29.000000000 -0800
@@ -0,0 +1,48 @@
+#############################################################
+#
+# dhcpcd
+#
+#############################################################
+
+DHCPCD_VERSION = 5.6.7
+DHCPCD_SOURCE = dhcpcd-$(DHCPCD_VERSION).tar.bz2
+DHCPCD_SITE = http://roy.marples.name/downloads/dhcpcd/
+DHCPCD_LICENSE = BSD-2c
+DHCPCD_INSTALL_STAGING = NO
+
+
+CONFIG_ARGS += --target=$(BR2_GCC_TARGET_ARCH)
+
+#CONFIG_ARGS += --with-cc=$(TARGET_CC)
+
+ifeq ($(BR2_USE_MMU),n)
+ CONFIG_ARGS += --disable-fork
+endif
+
+ifeq ($(BR2_INET_IPV6),)
+ DHCPCD_CFLAGS += -UHASIPv6
+endif
+
+define DHCPCD_CONFIGURE_CMDS
+ (cd $(@D); \
+ ./configure $(CONFIG_ARGS) )
+endef
+
+define DHCPCD_BUILD_CMDS
+ $(MAKE) $(TARGET_CONFIGURE_OPTS) CC="$(TARGET_CC)" LD="$(TARGET_LD)"
PATH=$(TARGET_PATH) $(DHCPCD_CFLAGS) -C $(@D) all
+endef
+
+define DHCPCD_INSTALL_TARGET_CMDS
+ $(INSTALL) -D -m 0755 $(@D)/dhcpcd $(TARGET_DIR)/usr/bin/dhcpcd
+ $(INSTALL) -D -m 0644 $(@D)/dhcpcd.conf $(TARGET_DIR)/etc/dhcpcd.conf
+endef
+
+define DHCPCD_DEVICES
+ #/dev/foo c 666 0 0 42 0 - - -
+endef
+
+define DHCPCD_PERMISSIONS
+ /usr/bin/dhcpcd f 4755 0 0 - - - - -
+endef
+
+$(eval $(call GENTARGETS))
next prev parent reply other threads:[~2013-03-07 1:44 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 18:37 [Buildroot] adding dhcpcd John Stile
2013-03-01 18:47 ` Gustavo Zacarias
2013-03-05 16:21 ` John Stile
2013-03-05 18:47 ` Thomas Petazzoni
2013-03-06 18:01 ` John Stile
2013-03-06 18:58 ` Thomas Petazzoni
2013-03-06 19:50 ` John Stile
2013-03-06 20:05 ` Reuben Dowle
2013-03-06 20:08 ` Thomas Petazzoni
2013-03-06 20:41 ` John Stile
2013-03-06 20:54 ` Thomas Petazzoni
2013-03-06 21:02 ` John Stile
2013-03-06 21:14 ` Thomas Petazzoni
2013-03-06 21:20 ` John Stile
2013-03-06 21:29 ` Thomas Petazzoni
2013-03-06 22:57 ` John Stile
2013-03-06 23:48 ` Gilles Talis
2013-03-07 1:44 ` John Stile [this message]
2013-03-07 4:51 ` Gilles Talis
2013-03-07 7:31 ` John Stile
2013-03-07 8:53 ` Gilles Talis
2013-03-07 14:53 ` John Stile
2013-03-07 15:03 ` Thomas Petazzoni
2013-03-07 15:30 ` John Stile
2013-03-07 17:15 ` Thomas Petazzoni
2013-03-06 20:06 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1362620699.20183.193.camel@genx \
--to=john@stilen.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.