[PATCH v3 06/11] ARM: vexpress: use clocksource_of_init for sp804

[pawel.moll@arm.com (Pawel Moll)]

On Fri, 2013-03-15 at 12:34 +0000, Russell King - ARM Linux wrote:
> However, for SP804 selection, there are cases where it matters, such as
> on Versatile Express where you have to select the right set of SP804 to
> have a working system (because ARM didn't fully document the SP804 setup
> there) and we have no way to switch some of those timers from their
> 32kHz clock source.  But then we could just omit the clock source for
> the "bad" SP804s which would prevent them being used.

Both VE motherboard's SP804s TIMCLKENx inputs are fed by the SP810's
outputs:

v2m_timer01: timer at 11000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x11000 0x1000>;
	interrupts = <2>;
	clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
	clock-names = "timclken1", "timclken2", "apb_pclk";
};      

v2m_timer23: timer at 12000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x12000 0x1000>;
	interrupts = <3>;
	clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
	clock-names = "timclken1", "timclken2", "apb_pclk";
};

TIMCLKs are wired to the SMB_CLK, so the effective rate depends on the
TIMCLKENx only.

The SP810 takes the 32kHz and 1MHz reference clocks:

v2m_sysctl: sysctl at 01000 {
	compatible = "arm,sp810", "arm,primecell";
	reg = <0x01000 0x1000>;
	clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
	clock-names = "refclk", "timclk", "apb_pclk";
	#clock-cells = <1>;
	clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
};

and the code in drivers/clk/versatile/clk-vexpress.c picks up the faster
one as the parent.

The V2P-CA9 SP804's TIMCLK is wired to one of the main clock generators:

timer at 100e4000 {
	compatible = "arm,sp804", "arm,primecell";
	reg = <0x100e4000 0x1000>;
	interrupts = <0 48 4>,
	             <0 49 4>;
	clocks = <&oscclk2>, <&oscclk2>;
	clock-names = "timclk", "apb_pclk";
};

Both TIMCLKEN0 & 1 are pulled up to 1 so they have no effect on the
timer rates.

Overall, the description of the VE clocking in the Device Tree is rather
complete.

Pawe?