From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Wang Dongsheng-B40534 <B40534@freescale.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>,
Gala Kumar-B11780 <B11780@freescale.com>,
"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH 1/3] powerpc/mpic: add irq_set_wake support
Date: Mon, 18 Mar 2013 15:41:33 +0100 [thread overview]
Message-ID: <1363617693.15862.1.camel@pasglop> (raw)
In-Reply-To: <ABB05CD9C9F68C46A5CEDC7F15439259EB6434@039-SN2MPN1-022.039d.mgd.msft.net>
On Mon, 2013-03-18 at 09:28 +0000, Wang Dongsheng-B40534 wrote:
> Hi Benjamin & Kumar,
>
> I am not sure who can apply these patches...
>
> Could you apply these patches?
I can but I need somebody to review them, I don't have the bandwidth nor
am I familiar with the FSL changes to the MPIC.
Cheers,
Ben.
> Thanks.
>
> [1/3] powerpc/mpic: add irq_set_wake support
> http://patchwork.ozlabs.org/patch/226034/
>
> [2/3] powerpc/mpic: add global timer support
> http://patchwork.ozlabs.org/patch/226035/
>
> [3/3] powerpc/fsl: add MPIC timer wakeup support
> http://patchwork.ozlabs.org/patch/226036/
>
> > -----Original Message-----
> > From: Wang Dongsheng-B40534
> > Sent: Friday, March 08, 2013 3:39 PM
> > To: Wood Scott-B07421; Gala Kumar-B11780
> > Cc: linuxppc-dev@lists.ozlabs.org; Wang Dongsheng-B40534
> > Subject: [PATCH 1/3] powerpc/mpic: add irq_set_wake support
> >
> > Add irq_set_wake support. Just add IRQF_NO_SUSPEND to desc->action->flag.
> > So the wake up interrupt will not be disable in suspend_device_irqs.
> >
> > Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
> > ---
> > arch/powerpc/sysdev/mpic.c | 15 +++++++++++++++
> > 1 files changed, 15 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
> > index 3b2efd4..10e474e 100644
> > --- a/arch/powerpc/sysdev/mpic.c
> > +++ b/arch/powerpc/sysdev/mpic.c
> > @@ -920,6 +920,18 @@ int mpic_set_irq_type(struct irq_data *d, unsigned
> > int flow_type)
> > return IRQ_SET_MASK_OK_NOCOPY;
> > }
> >
> > +static int mpic_irq_set_wake(struct irq_data *d, unsigned int on) {
> > + struct irq_desc *desc = container_of(d, struct irq_desc, irq_data);
> > +
> > + if (on)
> > + desc->action->flags |= IRQF_NO_SUSPEND;
> > + else
> > + desc->action->flags &= ~IRQF_NO_SUSPEND;
> > +
> > + return 0;
> > +}
> > +
> > void mpic_set_vector(unsigned int virq, unsigned int vector) {
> > struct mpic *mpic = mpic_from_irq(virq); @@ -957,6 +969,7 @@ static
> > struct irq_chip mpic_irq_chip = {
> > .irq_unmask = mpic_unmask_irq,
> > .irq_eoi = mpic_end_irq,
> > .irq_set_type = mpic_set_irq_type,
> > + .irq_set_wake = mpic_irq_set_wake,
> > };
> >
> > #ifdef CONFIG_SMP
> > @@ -971,6 +984,7 @@ static struct irq_chip mpic_tm_chip = {
> > .irq_mask = mpic_mask_tm,
> > .irq_unmask = mpic_unmask_tm,
> > .irq_eoi = mpic_end_irq,
> > + .irq_set_wake = mpic_irq_set_wake,
> > };
> >
> > #ifdef CONFIG_MPIC_U3_HT_IRQS
> > @@ -981,6 +995,7 @@ static struct irq_chip mpic_irq_ht_chip = {
> > .irq_unmask = mpic_unmask_ht_irq,
> > .irq_eoi = mpic_end_ht_irq,
> > .irq_set_type = mpic_set_irq_type,
> > + .irq_set_wake = mpic_irq_set_wake,
> > };
> > #endif /* CONFIG_MPIC_U3_HT_IRQS */
> >
> > --
> > 1.7.5.1
>
next prev parent reply other threads:[~2013-03-18 14:41 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 7:38 [PATCH 1/3] powerpc/mpic: add irq_set_wake support Wang Dongsheng
2013-03-08 7:38 ` [PATCH 2/3] powerpc/mpic: add global timer support Wang Dongsheng
2013-03-18 23:46 ` Scott Wood
2013-03-19 7:55 ` Wang Dongsheng-B40534
2013-03-19 22:59 ` Scott Wood
2013-03-20 6:45 ` Wang Dongsheng-B40534
2013-03-20 22:59 ` Scott Wood
2013-03-22 6:14 ` Wang Dongsheng-B40534
2013-03-22 22:29 ` Scott Wood
2013-03-26 3:29 ` Wang Dongsheng-B40534
2013-03-26 17:31 ` Scott Wood
2013-03-27 3:23 ` Wang Dongsheng-B40534
2013-03-27 17:11 ` Scott Wood
2013-03-28 2:29 ` Wang Dongsheng-B40534
2013-03-28 19:47 ` Scott Wood
2013-03-29 1:58 ` Wang Dongsheng-B40534
2013-03-08 7:38 ` [PATCH 3/3] powerpc/fsl: add MPIC timer wakeup support Wang Dongsheng
2013-03-19 0:30 ` Scott Wood
2013-03-19 6:25 ` Wang Dongsheng-B40534
2013-03-19 22:54 ` Scott Wood
2013-03-20 3:48 ` Wang Dongsheng-B40534
2013-03-20 21:48 ` Scott Wood
2013-03-22 5:46 ` Wang Dongsheng-B40534
2013-03-22 22:11 ` Scott Wood
2013-03-26 3:27 ` Wang Dongsheng-B40534
2013-03-26 17:35 ` Scott Wood
2013-03-27 3:21 ` Wang Dongsheng-B40534
2013-03-27 20:25 ` Scott Wood
2013-03-28 3:09 ` Wang Dongsheng-B40534
2013-03-18 9:28 ` [PATCH 1/3] powerpc/mpic: add irq_set_wake support Wang Dongsheng-B40534
2013-03-18 14:41 ` Benjamin Herrenschmidt [this message]
2013-03-18 14:44 ` Gala Kumar-B11780
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363617693.15862.1.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=B07421@freescale.com \
--cc=B11780@freescale.com \
--cc=B40534@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.