From: Rusty Russell <rusty@rustcorp.com.au>
To: virtualization@lists.linux-foundation.org
Subject: [PATCH 02/22] virtio_config: use size-based accessors.
Date: Thu, 21 Mar 2013 18:59:23 +1030 [thread overview]
Message-ID: <1363854584-25795-3-git-send-email-rusty@rustcorp.com.au> (raw)
In-Reply-To: <1363854584-25795-1-git-send-email-rusty@rustcorp.com.au>
This lets the transport do endian conversion if necessary, and insulates
the drivers from that change.
Most drivers can use the simple helpers virtio_cread() and virtio_cwrite().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
drivers/block/virtio_blk.c | 77 +++++++++++++++++----------------------
drivers/char/virtio_console.c | 15 +++-----
drivers/net/caif/caif_virtio.c | 23 ++++++------
drivers/net/virtio_net.c | 28 ++++++++------
drivers/scsi/virtio_scsi.c | 12 ++----
drivers/virtio/virtio_balloon.c | 10 ++---
net/9p/trans_virtio.c | 9 ++---
7 files changed, 79 insertions(+), 95 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 6472395..1b1bbd3 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -456,18 +456,15 @@ static int virtblk_ioctl(struct block_device *bdev, fmode_t mode,
static int virtblk_getgeo(struct block_device *bd, struct hd_geometry *geo)
{
struct virtio_blk *vblk = bd->bd_disk->private_data;
- struct virtio_blk_geometry vgeo;
- int err;
/* see if the host passed in geometry config */
- err = virtio_config_val(vblk->vdev, VIRTIO_BLK_F_GEOMETRY,
- offsetof(struct virtio_blk_config, geometry),
- &vgeo);
-
- if (!err) {
- geo->heads = vgeo.heads;
- geo->sectors = vgeo.sectors;
- geo->cylinders = vgeo.cylinders;
+ if (virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_GEOMETRY)) {
+ virtio_cread(vblk->vdev, struct virtio_blk_config,
+ geometry.cylinders, &geo->cylinders);
+ virtio_cread(vblk->vdev, struct virtio_blk_config,
+ geometry.heads, &geo->heads);
+ virtio_cread(vblk->vdev, struct virtio_blk_config,
+ geometry.sectors, &geo->sectors);
} else {
/* some standard values, similar to sd */
geo->heads = 1 << 6;
@@ -529,8 +526,7 @@ static void virtblk_config_changed_work(struct work_struct *work)
goto done;
/* Host must always specify the capacity. */
- vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
- &capacity, sizeof(capacity));
+ virtio_cread(vdev, struct virtio_blk_config, capacity, &capacity);
/* If capacity is too big, truncate with warning. */
if ((sector_t)capacity != capacity) {
@@ -608,9 +604,9 @@ static int virtblk_get_cache_mode(struct virtio_device *vdev)
u8 writeback;
int err;
- err = virtio_config_val(vdev, VIRTIO_BLK_F_CONFIG_WCE,
- offsetof(struct virtio_blk_config, wce),
- &writeback);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_CONFIG_WCE,
+ struct virtio_blk_config, wce,
+ &writeback);
if (err)
writeback = virtio_has_feature(vdev, VIRTIO_BLK_F_WCE);
@@ -642,7 +638,6 @@ virtblk_cache_type_store(struct device *dev, struct device_attribute *attr,
struct virtio_blk *vblk = disk->private_data;
struct virtio_device *vdev = vblk->vdev;
int i;
- u8 writeback;
BUG_ON(!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_CONFIG_WCE));
for (i = ARRAY_SIZE(virtblk_cache_types); --i >= 0; )
@@ -652,11 +647,7 @@ virtblk_cache_type_store(struct device *dev, struct device_attribute *attr,
if (i < 0)
return -EINVAL;
- writeback = i;
- vdev->config->set(vdev,
- offsetof(struct virtio_blk_config, wce),
- &writeback, sizeof(writeback));
-
+ virtio_cwrite8(vdev, offsetof(struct virtio_blk_config, wce), i);
virtblk_update_cache_mode(vdev);
return count;
}
@@ -699,9 +690,9 @@ static int virtblk_probe(struct virtio_device *vdev)
index = err;
/* We need to know how many segments before we allocate. */
- err = virtio_config_val(vdev, VIRTIO_BLK_F_SEG_MAX,
- offsetof(struct virtio_blk_config, seg_max),
- &sg_elems);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_SEG_MAX,
+ struct virtio_blk_config, seg_max,
+ &sg_elems);
/* We need at least one SG element, whatever they say. */
if (err || !sg_elems)
@@ -772,8 +763,7 @@ static int virtblk_probe(struct virtio_device *vdev)
set_disk_ro(vblk->disk, 1);
/* Host must always specify the capacity. */
- vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
- &cap, sizeof(cap));
+ virtio_cread(vdev, struct virtio_blk_config, capacity, &cap);
/* If capacity is too big, truncate with warning. */
if ((sector_t)cap != cap) {
@@ -794,46 +784,45 @@ static int virtblk_probe(struct virtio_device *vdev)
/* Host can optionally specify maximum segment size and number of
* segments. */
- err = virtio_config_val(vdev, VIRTIO_BLK_F_SIZE_MAX,
- offsetof(struct virtio_blk_config, size_max),
- &v);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_SIZE_MAX,
+ struct virtio_blk_config, size_max, &v);
if (!err)
blk_queue_max_segment_size(q, v);
else
blk_queue_max_segment_size(q, -1U);
/* Host can optionally specify the block size of the device */
- err = virtio_config_val(vdev, VIRTIO_BLK_F_BLK_SIZE,
- offsetof(struct virtio_blk_config, blk_size),
- &blk_size);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_BLK_SIZE,
+ struct virtio_blk_config, blk_size,
+ &blk_size);
if (!err)
blk_queue_logical_block_size(q, blk_size);
else
blk_size = queue_logical_block_size(q);
/* Use topology information if available */
- err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
- offsetof(struct virtio_blk_config, physical_block_exp),
- &physical_block_exp);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ struct virtio_blk_config, physical_block_exp,
+ &physical_block_exp);
if (!err && physical_block_exp)
blk_queue_physical_block_size(q,
blk_size * (1 << physical_block_exp));
- err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
- offsetof(struct virtio_blk_config, alignment_offset),
- &alignment_offset);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ struct virtio_blk_config, alignment_offset,
+ &alignment_offset);
if (!err && alignment_offset)
blk_queue_alignment_offset(q, blk_size * alignment_offset);
- err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
- offsetof(struct virtio_blk_config, min_io_size),
- &min_io_size);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ struct virtio_blk_config, min_io_size,
+ &min_io_size);
if (!err && min_io_size)
blk_queue_io_min(q, blk_size * min_io_size);
- err = virtio_config_val(vdev, VIRTIO_BLK_F_TOPOLOGY,
- offsetof(struct virtio_blk_config, opt_io_size),
- &opt_io_size);
+ err = virtio_cread_feature(vdev, VIRTIO_BLK_F_TOPOLOGY,
+ struct virtio_blk_config, opt_io_size,
+ &opt_io_size);
if (!err && opt_io_size)
blk_queue_io_opt(q, blk_size * opt_io_size);
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index e6ba6b7..1735c38 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -1800,12 +1800,8 @@ static void config_intr(struct virtio_device *vdev)
struct port *port;
u16 rows, cols;
- vdev->config->get(vdev,
- offsetof(struct virtio_console_config, cols),
- &cols, sizeof(u16));
- vdev->config->get(vdev,
- offsetof(struct virtio_console_config, rows),
- &rows, sizeof(u16));
+ virtio_cread(vdev, struct virtio_console_config, cols, &cols);
+ virtio_cread(vdev, struct virtio_console_config, rows, &rows);
port = find_port_by_id(portdev, 0);
set_console_size(port, rows, cols);
@@ -1977,10 +1973,9 @@ static int virtcons_probe(struct virtio_device *vdev)
/* Don't test MULTIPORT at all if we're rproc: not a valid feature! */
if (!is_rproc_serial(vdev) &&
- virtio_config_val(vdev, VIRTIO_CONSOLE_F_MULTIPORT,
- offsetof(struct virtio_console_config,
- max_nr_ports),
- &portdev->config.max_nr_ports) == 0) {
+ virtio_cread_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT,
+ struct virtio_console_config, max_nr_ports,
+ &portdev->config.max_nr_ports) == 0) {
multiport = true;
}
diff --git a/drivers/net/caif/caif_virtio.c b/drivers/net/caif/caif_virtio.c
index 8308dee..ef602e3 100644
--- a/drivers/net/caif/caif_virtio.c
+++ b/drivers/net/caif/caif_virtio.c
@@ -682,18 +682,19 @@ static int cfv_probe(struct virtio_device *vdev)
goto err;
/* Get the CAIF configuration from virtio config space, if available */
-#define GET_VIRTIO_CONFIG_OPS(_v, _var, _f) \
- ((_v)->config->get(_v, offsetof(struct virtio_caif_transf_config, _f), \
- &_var, \
- FIELD_SIZEOF(struct virtio_caif_transf_config, _f)))
-
if (vdev->config->get) {
- GET_VIRTIO_CONFIG_OPS(vdev, cfv->tx_hr, headroom);
- GET_VIRTIO_CONFIG_OPS(vdev, cfv->rx_hr, headroom);
- GET_VIRTIO_CONFIG_OPS(vdev, cfv->tx_tr, tailroom);
- GET_VIRTIO_CONFIG_OPS(vdev, cfv->rx_tr, tailroom);
- GET_VIRTIO_CONFIG_OPS(vdev, cfv->mtu, mtu);
- GET_VIRTIO_CONFIG_OPS(vdev, cfv->mru, mtu);
+ virtio_cread(vdev, struct virtio_caif_transf_config, headroom,
+ &cfv->tx_hr);
+ virtio_cread(vdev, struct virtio_caif_transf_config, headroom,
+ &cfv->rx_hr);
+ virtio_cread(vdev, struct virtio_caif_transf_config, tailroom,
+ &cfv->tx_tr);
+ virtio_cread(vdev, struct virtio_caif_transf_config, tailroom,
+ &cfv->rx_tr);
+ virtio_cread(vdev, struct virtio_caif_transf_config, mtu,
+ &cfv->mtu);
+ virtio_cread(vdev, struct virtio_caif_transf_config, mtu,
+ &cfv->mru);
} else {
cfv->tx_hr = CFV_DEF_HEADROOM;
cfv->rx_hr = CFV_DEF_HEADROOM;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index be70487..61c1592 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -829,8 +829,13 @@ static int virtnet_set_mac_address(struct net_device *dev, void *p)
return -EINVAL;
}
} else if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC)) {
- vdev->config->set(vdev, offsetof(struct virtio_net_config, mac),
- addr->sa_data, dev->addr_len);
+ unsigned int i;
+
+ /* Naturally, this has an atomicity problem. */
+ for (i = 0; i < dev->addr_len; i++)
+ virtio_cwrite8(vdev,
+ offsetof(struct virtio_net_config, mac) +
+ i, addr->sa_data[i]);
}
eth_commit_mac_addr_change(dev, p);
@@ -1239,9 +1244,8 @@ static void virtnet_config_changed_work(struct work_struct *work)
if (!vi->config_enable)
goto done;
- if (virtio_config_val(vi->vdev, VIRTIO_NET_F_STATUS,
- offsetof(struct virtio_net_config, status),
- &v) < 0)
+ if (virtio_cread_feature(vi->vdev, VIRTIO_NET_F_STATUS,
+ struct virtio_net_config, status, &v) < 0)
goto done;
if (v & VIRTIO_NET_S_ANNOUNCE) {
@@ -1463,9 +1467,9 @@ static int virtnet_probe(struct virtio_device *vdev)
u16 max_queue_pairs;
/* Find if host supports multiqueue virtio_net device */
- err = virtio_config_val(vdev, VIRTIO_NET_F_MQ,
- offsetof(struct virtio_net_config,
- max_virtqueue_pairs), &max_queue_pairs);
+ err = virtio_cread_feature(vdev, VIRTIO_NET_F_MQ,
+ struct virtio_net_config,
+ max_virtqueue_pairs, &max_queue_pairs);
/* We need at least 2 queue's */
if (err || max_queue_pairs < VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN ||
@@ -1513,9 +1517,11 @@ static int virtnet_probe(struct virtio_device *vdev)
}
/* Configuration may specify what MAC to use. Otherwise random. */
- if (virtio_config_val_len(vdev, VIRTIO_NET_F_MAC,
- offsetof(struct virtio_net_config, mac),
- dev->dev_addr, dev->addr_len) < 0)
+ if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
+ virtio_cread_bytes(vdev,
+ offsetof(struct virtio_net_config, mac),
+ dev->dev_addr, dev->addr_len);
+ else
eth_hw_addr_random(dev);
/* Set up our device-specific information */
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index f679b8c..214d397 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -547,19 +547,15 @@ static struct scsi_host_template virtscsi_host_template = {
#define virtscsi_config_get(vdev, fld) \
({ \
typeof(((struct virtio_scsi_config *)0)->fld) __val; \
- vdev->config->get(vdev, \
- offsetof(struct virtio_scsi_config, fld), \
- &__val, sizeof(__val)); \
+ virtio_cread(vdev, struct virtio_scsi_config, fld, &__val); \
__val; \
})
#define virtscsi_config_set(vdev, fld, val) \
- (void)({ \
+ do { \
typeof(((struct virtio_scsi_config *)0)->fld) __val = (val); \
- vdev->config->set(vdev, \
- offsetof(struct virtio_scsi_config, fld), \
- &__val, sizeof(__val)); \
- })
+ virtio_cwrite(vdev, struct virtio_scsi_config, fld, __val); \
+ } while(0)
static void virtscsi_init_vq(struct virtio_scsi_vq *virtscsi_vq,
struct virtqueue *vq)
diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c
index 8dab163..bbab952 100644
--- a/drivers/virtio/virtio_balloon.c
+++ b/drivers/virtio/virtio_balloon.c
@@ -273,9 +273,8 @@ static inline s64 towards_target(struct virtio_balloon *vb)
__le32 v;
s64 target;
- vb->vdev->config->get(vb->vdev,
- offsetof(struct virtio_balloon_config, num_pages),
- &v, sizeof(v));
+ virtio_cread(vb->vdev, struct virtio_balloon_config, num_pages, &v);
+
target = le32_to_cpu(v);
return target - vb->num_pages;
}
@@ -284,9 +283,8 @@ static void update_balloon_size(struct virtio_balloon *vb)
{
__le32 actual = cpu_to_le32(vb->num_pages);
- vb->vdev->config->set(vb->vdev,
- offsetof(struct virtio_balloon_config, actual),
- &actual, sizeof(actual));
+ virtio_cwrite(vb->vdev, struct virtio_balloon_config, num_pages,
+ &actual);
}
static int balloon(void *_vballoon)
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index de2e950..d843d5d 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -514,9 +514,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
chan->inuse = false;
if (virtio_has_feature(vdev, VIRTIO_9P_MOUNT_TAG)) {
- vdev->config->get(vdev,
- offsetof(struct virtio_9p_config, tag_len),
- &tag_len, sizeof(tag_len));
+ virtio_cread(vdev, struct virtio_9p_config, tag_len, &tag_len);
} else {
err = -EINVAL;
goto out_free_vq;
@@ -526,8 +524,9 @@ static int p9_virtio_probe(struct virtio_device *vdev)
err = -ENOMEM;
goto out_free_vq;
}
- vdev->config->get(vdev, offsetof(struct virtio_9p_config, tag),
- tag, tag_len);
+
+ virtio_cread_bytes(vdev, offsetof(struct virtio_9p_config, tag),
+ tag, tag_len);
chan->tag = tag;
chan->tag_len = tag_len;
err = sysfs_create_file(&(vdev->dev.kobj), &dev_attr_mount_tag.attr);
--
1.7.10.4
next prev parent reply other threads:[~2013-03-21 8:29 UTC|newest]
Thread overview: 94+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-21 8:29 [PATCH 00/22] New virtio PCI layout Rusty Russell
2013-03-21 8:29 ` [PATCH 01/22] virtio_config: introduce size-based accessors Rusty Russell
2013-03-21 8:29 ` Rusty Russell [this message]
2013-03-21 8:29 ` [PATCH 03/22] virtio_config: make transports implement accessors Rusty Russell
2013-03-21 9:09 ` Cornelia Huck
2013-03-22 0:31 ` Rusty Russell
2013-03-22 9:13 ` Cornelia Huck
2013-03-22 14:43 ` Sjur Brændeland
2013-03-24 4:24 ` Rusty Russell
2013-04-03 15:58 ` Sjur Brændeland
2013-04-02 17:16 ` Pawel Moll
2013-03-21 8:29 ` [PATCH 04/22] virtio: use u32, not bitmap for struct virtio_device's features Rusty Russell
2013-03-21 10:00 ` Cornelia Huck
2013-03-22 0:48 ` Rusty Russell
2013-03-21 8:29 ` [PATCH 05/22] virtio: add support for 64 bit features Rusty Russell
2013-03-21 10:06 ` Cornelia Huck
2013-03-22 0:50 ` Rusty Russell
2013-03-22 9:15 ` Cornelia Huck
2013-03-22 14:50 ` Sjur Brændeland
2013-03-22 20:12 ` Ohad Ben-Cohen
2013-03-25 8:30 ` Rusty Russell
2013-04-02 17:09 ` Pawel Moll
2013-03-21 8:29 ` [PATCH 06/22] virtio: move vring structure into struct virtqueue Rusty Russell
2013-03-21 8:29 ` [PATCH 07/22] pci: add pci_iomap_range Rusty Russell
2013-03-21 8:29 ` [PATCH 08/22] virtio-pci: define layout for virtio vendor-specific capabilities Rusty Russell
2013-03-21 8:29 ` [PATCH 09/22] virtio_pci: move old defines to legacy, introduce new structure Rusty Russell
2013-03-21 8:29 ` [PATCH 10/22] virtio_pci: use _LEGACY_ defines in virtio_pci_legacy.c Rusty Russell
2013-03-21 8:29 ` [PATCH 11/22] virtio_pci: don't use the legacy driver if we find the new PCI capabilities Rusty Russell
2013-03-21 8:29 ` [PATCH 12/22] virtio_pci: allow duplicate capabilities Rusty Russell
2013-03-21 10:28 ` Michael S. Tsirkin
2013-03-21 14:26 ` H. Peter Anvin
2013-03-21 14:43 ` Michael S. Tsirkin
2013-03-21 14:45 ` H. Peter Anvin
2013-03-21 15:19 ` Michael S. Tsirkin
2013-03-21 15:26 ` H. Peter Anvin
2013-03-21 15:58 ` Michael S. Tsirkin
2013-03-21 16:04 ` H. Peter Anvin
2013-03-21 16:11 ` Michael S. Tsirkin
2013-03-21 16:15 ` H. Peter Anvin
2013-03-21 16:26 ` Michael S. Tsirkin
2013-03-21 16:32 ` H. Peter Anvin
2013-03-21 17:07 ` Michael S. Tsirkin
2013-03-21 17:09 ` H. Peter Anvin
2013-03-21 17:13 ` Michael S. Tsirkin
2013-03-21 17:49 ` Michael S. Tsirkin
2013-03-21 17:54 ` H. Peter Anvin
2013-03-21 18:01 ` Michael S. Tsirkin
2013-03-22 0:57 ` Rusty Russell
2013-03-22 3:17 ` H. Peter Anvin
2013-03-24 13:14 ` Michael S. Tsirkin
2013-03-24 23:23 ` H. Peter Anvin
2013-03-25 6:53 ` Michael S. Tsirkin
2013-03-25 6:54 ` H. Peter Anvin
2013-03-25 10:03 ` Rusty Russell
2013-03-21 8:29 ` [PATCH 13/22] virtio_pci: new, capability-aware driver Rusty Russell
2013-03-21 10:24 ` Michael S. Tsirkin
2013-03-22 1:02 ` Rusty Russell
2013-03-24 13:08 ` Michael S. Tsirkin
2013-03-21 8:29 ` [PATCH 14/22] virtio_pci: layout changes as per hpa's suggestions Rusty Russell
2013-03-21 8:29 ` [PATCH 15/22] virtio_pci: use little endian for config space Rusty Russell
2013-03-21 8:29 ` [PATCH 16/22] virtio_pci: use separate notification offsets for each vq Rusty Russell
2013-03-21 10:13 ` Michael S. Tsirkin
2013-03-21 10:35 ` Michael S. Tsirkin
2013-03-22 2:52 ` Rusty Russell
2013-03-24 14:38 ` Michael S. Tsirkin
2013-03-24 20:19 ` Michael S. Tsirkin
2013-03-24 23:27 ` H. Peter Anvin
2013-03-25 7:05 ` Michael S. Tsirkin
2013-03-25 10:00 ` Rusty Russell
2013-03-26 19:39 ` Michael S. Tsirkin
2013-03-27 0:07 ` Rusty Russell
2013-03-27 0:22 ` H. Peter Anvin
2013-03-27 2:31 ` H. Peter Anvin
2013-03-27 11:26 ` Michael S. Tsirkin
2013-03-27 14:21 ` H. Peter Anvin
2013-03-27 11:25 ` Michael S. Tsirkin
2013-03-28 4:50 ` H. Peter Anvin
2013-03-30 3:19 ` Rusty Russell
2013-04-02 22:51 ` H. Peter Anvin
2013-04-03 6:10 ` Rusty Russell
2013-04-03 11:22 ` Michael S. Tsirkin
2013-04-03 14:10 ` H. Peter Anvin
2013-04-03 14:35 ` Michael S. Tsirkin
2013-04-03 14:35 ` H. Peter Anvin
2013-04-03 17:02 ` Michael S. Tsirkin
2013-04-04 5:48 ` Rusty Russell
2013-04-04 8:25 ` Michael S. Tsirkin
2013-04-05 1:25 ` Rusty Russell
2013-03-21 8:29 ` [PATCH 17/22] virtio_pci_legacy: cleanup struct virtio_pci_vq_info Rusty Russell
2013-03-21 8:29 ` [PATCH 18/22] virtio_pci: share structure between legacy and modern Rusty Russell
2013-03-21 8:29 ` [PATCH 19/22] virtio_pci: share interrupt/notify handlers " Rusty Russell
2013-03-21 8:29 ` [PATCH 20/22] virtio_pci: share virtqueue setup/teardown between modern and legacy driver Rusty Russell
2013-03-21 8:29 ` [PATCH 21/22] virtio_pci: simplify common helpers Rusty Russell
2013-03-21 8:29 ` [PATCH 22/22] virtio_pci: fix finalize_features in modern driver Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363854584-25795-3-git-send-email-rusty@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.