From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 16/31] board/t4240qds, b4860qds: LAW/TLB for DCSR set to size 32M
Date: Fri, 22 Mar 2013 10:29:14 -0700 [thread overview]
Message-ID: <1363973369-26110-16-git-send-email-yorksun@freescale.com> (raw)
In-Reply-To: <1363973369-26110-1-git-send-email-yorksun@freescale.com>
From: Stephen George <stephen.george@freescale.com>
Debug trace buffers are memory mapped in DCSR space beyond 4M.
Signed-off-by: Stephen George <stephen.george@freescale.com>
---
board/freescale/b4860qds/law.c | 3 ++-
board/freescale/b4860qds/tlb.c | 2 +-
board/freescale/t4qds/law.c | 3 ++-
board/freescale/t4qds/tlb.c | 2 +-
doc/README.b4860qds | 4 ++--
doc/README.t4240qds | 2 +-
6 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/board/freescale/b4860qds/law.c b/board/freescale/b4860qds/law.c
index 4142e01..abaad7a 100644
--- a/board/freescale/b4860qds/law.c
+++ b/board/freescale/b4860qds/law.c
@@ -34,7 +34,8 @@ struct law_entry law_table[] = {
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
index 0ea4976..3572b44 100644
--- a/board/freescale/b4860qds/tlb.c
+++ b/board/freescale/b4860qds/tlb.c
@@ -115,7 +115,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 10, BOOKE_PAGESZ_4M, 1),
+ 0, 10, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
index 6f2c5c8..f3848f3 100644
--- a/board/freescale/t4qds/law.c
+++ b/board/freescale/t4qds/law.c
@@ -37,7 +37,8 @@ struct law_entry law_table[] = {
#endif
SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
#ifdef CONFIG_SYS_DCSRBAR_PHYS
- SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+ /* Limit DCSR to 32M to access NPC Trace Buffer */
+ SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
#endif
#ifdef CONFIG_SYS_NAND_BASE_PHYS
SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC),
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
index 80eb511..92c01cf 100644
--- a/board/freescale/t4qds/tlb.c
+++ b/board/freescale/t4qds/tlb.c
@@ -115,7 +115,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
- 0, 13, BOOKE_PAGESZ_4M, 1),
+ 0, 13, BOOKE_PAGESZ_32M, 1),
#endif
#ifdef CONFIG_SYS_NAND_BASE
/*
diff --git a/doc/README.b4860qds b/doc/README.b4860qds
index f6c5ff8..bd10a6d 100644
--- a/doc/README.b4860qds
+++ b/doc/README.b4860qds
@@ -185,7 +185,7 @@ Start Address End Address Description Size
0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB
0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB
+0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB
0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB
0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB
@@ -215,7 +215,7 @@ Start Address End Address Description Size
0xF_A0C0_0000 0xF_DFFF_FFFF Free 1012 MB
0xF_A000_0000 0xF_A0BF_FFFF MAPLE0/1/2 12 MB
0xF_0040_0000 0xF_9FFF_FFFF Free 12 GB
-0xF_0000_0000 0xF_003F_FFFF DCSR 4 MB
+0xF_0000_0000 0xF_01FF_FFFF DCSR 32 MB
0xC_4000_0000 0xE_FFFF_FFFF Free 11 GB
0xC_3000_0000 0xC_3FFF_FFFF sRIO-2 I/O 256 MB
0xC_2000_0000 0xC_2FFF_FFFF sRIO-1 I/O 256 MB
diff --git a/doc/README.t4240qds b/doc/README.t4240qds
index 19e8a8a..a9841fb 100644
--- a/doc/README.t4240qds
+++ b/doc/README.t4240qds
@@ -86,7 +86,7 @@ The addresses in brackets are physical addresses.
0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff 2GB DDR (more than 2GB is initialized but not mapped under with TLB)
0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
-0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff 4MB DCSR
+0x0_f000_0000 (0xf_0000_0000) - 0x0_f1ff_ffff 32MB DCSR (includes trace buffers)
0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff 32MB BMan
0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff 32MB QMan
0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
--
1.7.9.5
next prev parent reply other threads:[~2013-03-22 17:29 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 17:28 [U-Boot] [PATCH 01/31] 83xx/pcie: fix build error for 83xx pcie York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 02/31] Enable L2 cache parity/ECC error checking York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 03/31] net/phy: fix select line for TN80xx York Sun
2013-03-22 20:59 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 04/31] powerpc/mpc85xx: check if core is disabled for showing status York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 05/31] powerpc/t4240qds: Add VDD override York Sun
2013-03-22 21:00 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 06/31] T4240/ramboot: enable PBL tool for T4240 York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 07/31] Add e6500 L2 replacement policy selection York Sun
2013-03-22 21:00 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 08/31] powerpc/p5040: enable NAND, SD, SPI boot support York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 09/31] powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 10/31] powerpc/mpc8xxx: Add T1040 and variant SoCs York Sun
2013-03-22 21:00 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 11/31] powerpc/chassis2: Change core numbering scheme York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 12/31] powerpc/mpc8xxx: Allow DDR overclock York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 13/31] powerpc/qixis: add clock measurement registers York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 14/31] powerpc/t4qds: use clock measurement for sysclk and ddr clock York Sun
2013-03-22 21:01 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 15/31] powerpc/p5040: enable PBL tool support York Sun
2013-03-22 17:29 ` York Sun [this message]
2013-03-22 17:29 ` [U-Boot] [PATCH 17/31] Enable XAUI interface for B4860QDS York Sun
2013-03-22 21:02 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 18/31] powerpc/t4qds: Add SW7[4] in the DIP switch display York Sun
2013-03-22 21:02 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 19/31] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 20/31] powerpc/t4qds: Slave module for boot " York Sun
2013-03-22 21:02 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 21/31] powerpc/t4240qds: fix PHY reset timeout issue York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 22/31] powerpc/doc: Fix the misalignment of document README.srio-pcie-boot-corenet York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 23/31] powerpc/b4860: fix for Serdes connectivity to SFP's York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 24/31] powerpc/mpc85xx: add setting of clock-frequency for mpic node York Sun
2013-03-22 21:03 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 25/31] powerpc/p2041: fix serdes reference clock frequency display for PC board York Sun
2013-03-22 21:03 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 26/31] sf: spansion: Add support for S25FL128S York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 27/31] powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 28/31] powerpc/p5040: fix mdio mux for 10G port York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 29/31] powerpc/usb: Fix usb device-tree fix-up York Sun
2013-03-22 21:04 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 30/31] fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speed York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 31/31] powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363973369-26110-16-git-send-email-yorksun@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.