From: linux@prisktech.co.nz (Tony Prisk)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv2 4/7] arm: dts: vt8500: Update Wondermedia SoC dtsi files for pinctrl driver
Date: Sat, 23 Mar 2013 18:13:50 +1300 [thread overview]
Message-ID: <1364015633-18580-5-git-send-email-linux@prisktech.co.nz> (raw)
In-Reply-To: <1364015633-18580-1-git-send-email-linux@prisktech.co.nz>
This patch adds pinctrl nodes to the VIA VT8500 and Wondermedia SoC dtsi
files to support the pinctrl driver.
Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
arch/arm/boot/dts/vt8500.dtsi | 8 ++++++++
arch/arm/boot/dts/wm8505.dtsi | 8 ++++++++
arch/arm/boot/dts/wm8650.dtsi | 8 ++++++++
arch/arm/boot/dts/wm8850.dtsi | 8 ++++++++
4 files changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi
index cf31ced..16388c2 100644
--- a/arch/arm/boot/dts/vt8500.dtsi
+++ b/arch/arm/boot/dts/vt8500.dtsi
@@ -32,6 +32,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "via,vt8500-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x00000001 0x00000001>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi
index e74a1c0..c5aa4c9 100644
--- a/arch/arm/boot/dts/wm8505.dtsi
+++ b/arch/arm/boot/dts/wm8505.dtsi
@@ -47,6 +47,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8505-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x80000000 0x80000000>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index db3c0a1..99c45e5 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -41,6 +41,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8650-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x80000000 0x80000000>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
diff --git a/arch/arm/boot/dts/wm8850.dtsi b/arch/arm/boot/dts/wm8850.dtsi
index e8cbfdc..60094cd 100644
--- a/arch/arm/boot/dts/wm8850.dtsi
+++ b/arch/arm/boot/dts/wm8850.dtsi
@@ -48,6 +48,14 @@
#gpio-cells = <3>;
};
+ pinctrl: pinctrl at d8110000 {
+ compatible = "wm,wm8850-pinctrl";
+ gpio-controller;
+ reg = <0xd8110000 0x10000>;
+ #gpio-cells = <2>;
+ wm,pinmux = <0x80000000 0x80000000>;
+ };
+
pmc at d8130000 {
compatible = "via,vt8500-pmc";
reg = <0xd8130000 0x1000>;
--
1.7.9.5
next prev parent reply other threads:[~2013-03-23 5:13 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-23 5:13 [PATCHv2 0/7] arm: vt8500: Add support for pinctrl/gpio module Tony Prisk
2013-03-23 5:13 ` [PATCHv2 1/7] of: Add support for reading a u32 from a multi-value property Tony Prisk
2013-03-23 5:13 ` Tony Prisk
2013-04-15 10:12 ` Grant Likely
2013-04-15 10:12 ` Grant Likely
2013-03-23 5:13 ` [PATCHv2 2/7] arm: vt8500: Increase available GPIOs on arch-vt8500 Tony Prisk
2013-03-23 10:44 ` Russell King - ARM Linux
2013-03-23 18:04 ` Tony Prisk
2013-03-23 5:13 ` [PATCHv2 3/7] pinctrl: gpio: vt8500: Add pincontrol driver for arch-vt8500 Tony Prisk
2013-03-25 17:05 ` Stephen Warren
2013-03-25 18:51 ` Tony Prisk
2013-03-26 20:28 ` Stephen Warren
2013-03-27 4:59 ` Tony Prisk
2013-03-27 16:47 ` Stephen Warren
2013-03-27 9:23 ` Tony Prisk
2013-03-27 15:53 ` Stephen Warren
2013-03-28 5:03 ` Tony Prisk
2013-03-23 5:13 ` Tony Prisk [this message]
2013-03-23 5:13 ` [PATCHv2 5/7] arm: vt8500: Remove gpio devicetree nodes Tony Prisk
2013-03-23 5:13 ` [PATCHv2 6/7] gpio: vt8500: Remove arch-vt8500 gpio driver Tony Prisk
2013-03-23 5:13 ` [PATCHv2 7/7] arm: vt8500: Remove pinmux configuration from mach-vt8500/vt8500.c Tony Prisk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364015633-18580-5-git-send-email-linux@prisktech.co.nz \
--to=linux@prisktech.co.nz \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.