From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Bengt Jonsson <bengt.g.jonsson@stericsson.com>,
Lee Jones <lee.jones@linaro.org>,
Yvan FILLION <yvan.fillion@stericsson.com>,
Liam Girdwood <lgirdwood@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH RFT 1/2] regulator: ab8500: Add missing enable_time settings
Date: Wed, 27 Mar 2013 17:47:22 +0800 [thread overview]
Message-ID: <1364377642.13084.0.camel@phoenix> (raw)
Base on the data provide by Bengt Jönsson, add below enable_time settings:
Worst case enable time from data sheet:
Vana: enable time = 140 us
Vaux1/2: enable time = 200 us
Vaux3: enable time = 450 us
Vintcore: enable time = 750 us
Vamic1/2: enable time = 500 us
Vdmic: enable time = 420 us
VTVout: enable time = 500 us
Vaudio: enable time = 140 us
Vusb: enable time = 150 us
This discussion thread is available at: https://lkml.org/lkml/2013/3/26/795
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
drivers/regulator/ab8500.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 12e2740..1a38524 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -391,6 +391,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
+ .enable_time = 200,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
@@ -412,6 +413,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages),
.volt_table = ldo_vauxn_voltages,
+ .enable_time = 200,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
@@ -433,6 +435,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vaux3_voltages),
.volt_table = ldo_vaux3_voltages,
+ .enable_time = 450,
},
.load_lp_uA = 5000,
.update_bank = 0x04,
@@ -454,6 +457,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = ARRAY_SIZE(ldo_vintcore_voltages),
.volt_table = ldo_vintcore_voltages,
+ .enable_time = 750,
},
.load_lp_uA = 5000,
.update_bank = 0x03,
@@ -506,6 +510,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 3300000,
+ .enable_time = 150,
},
.update_bank = 0x03,
.update_reg = 0x82,
@@ -520,6 +525,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2000000,
+ .enable_time = 140,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -535,6 +541,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2050000,
+ .enable_time = 500,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -550,6 +557,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 2050000,
+ .enable_time = 500,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -565,6 +573,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 1800000,
+ .enable_time = 420,
},
.update_bank = 0x03,
.update_reg = 0x83,
@@ -584,6 +593,7 @@ static struct ab8500_regulator_info
.owner = THIS_MODULE,
.n_voltages = 1,
.min_uV = 1200000,
+ .enable_time = 140,
},
.load_lp_uA = 1000,
.update_bank = 0x04,
--
1.7.10.4
next reply other threads:[~2013-03-27 9:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-27 9:47 Axel Lin [this message]
2013-03-27 9:48 ` [PATCH RFT 2/2] regulator: ab8500: Remove set_voltage_time_sel and delay setting Axel Lin
2013-03-27 10:42 ` Bengt Jönsson
2013-03-27 10:35 ` [PATCH RFT 1/2] regulator: ab8500: Add missing enable_time settings Bengt Jönsson
2013-03-27 23:18 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1364377642.13084.0.camel@phoenix \
--to=axel.lin@ingics.com \
--cc=bengt.g.jonsson@stericsson.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=yvan.fillion@stericsson.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.