From: Kevin Wolf <kwolf@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, stefanha@redhat.com
Subject: [Qemu-devel] [PATCH 5/5] qtest/ide-test: Test short and long PRDTs
Date: Wed, 8 May 2013 11:43:26 +0200 [thread overview]
Message-ID: <1368006206-2602-6-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1368006206-2602-1-git-send-email-kwolf@redhat.com>
This tests the behaviour of the DMA engine when the given PRDT contains
physical region descriptors for either more or less bytes than the
IDE request is for.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/ide-test.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/tests/ide-test.c b/tests/ide-test.c
index 5fc496f..bdc1da7 100644
--- a/tests/ide-test.c
+++ b/tests/ide-test.c
@@ -77,6 +77,8 @@ enum {
CMD_READ_DMA = 0xc8,
CMD_WRITE_DMA = 0xca,
CMD_IDENTIFY = 0xec,
+
+ CMDF_ABORT = 0x100,
};
enum {
@@ -170,9 +172,13 @@ static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
size_t len;
bool from_dev;
uint8_t status;
+ int flags;
dev = get_pci_device(&bmdma_base);
+ flags = cmd & ~0xff;
+ cmd &= 0xff;
+
switch (cmd) {
case CMD_READ_DMA:
from_dev = true;
@@ -209,6 +215,10 @@ static int send_dma_request(int cmd, uint64_t sector, int nb_sectors,
/* Start DMA transfer */
outb(bmdma_base + bmreg_cmd, BM_CMD_START | (from_dev ? BM_CMD_WRITE : 0));
+ if (flags & CMDF_ABORT) {
+ outb(bmdma_base + bmreg_cmd, 0);
+ }
+
/* Wait for the DMA transfer to complete */
do {
status = inb(bmdma_base + bmreg_status);
@@ -289,6 +299,48 @@ static void test_bmdma_simple_rw(void)
g_free(cmpbuf);
}
+static void test_bmdma_short_prdt(void)
+{
+ uint8_t status;
+
+ PrdtEntry prdt[] = {
+ { .addr = 0, .size = 0x10 | PRDT_EOT },
+ };
+
+ /* Normal request */
+ status = send_dma_request(CMD_READ_DMA, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, 0);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+ /* Abort the request before it completes */
+ status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, 0);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
+static void test_bmdma_long_prdt(void)
+{
+ uint8_t status;
+
+ PrdtEntry prdt[] = {
+ { .addr = 0, .size = 0x1000 | PRDT_EOT },
+ };
+
+ /* Normal request */
+ status = send_dma_request(CMD_READ_DMA, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, BM_STS_ACTIVE | BM_STS_INTR);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+
+ /* Abort the request before it completes */
+ status = send_dma_request(CMD_READ_DMA | CMDF_ABORT, 0, 1,
+ prdt, ARRAY_SIZE(prdt));
+ g_assert_cmphex(status, ==, BM_STS_INTR);
+ assert_bit_clear(inb(IDE_BASE + reg_status), DF | ERR);
+}
+
static void test_bmdma_setup(void)
{
ide_test_start(
@@ -375,6 +427,8 @@ int main(int argc, char **argv)
qtest_add_func("/ide/bmdma/setup", test_bmdma_setup);
qtest_add_func("/ide/bmdma/simple_rw", test_bmdma_simple_rw);
+ qtest_add_func("/ide/bmdma/short_prdt", test_bmdma_short_prdt);
+ qtest_add_func("/ide/bmdma/long_prdt", test_bmdma_long_prdt);
qtest_add_func("/ide/bmdma/teardown", test_bmdma_teardown);
ret = g_test_run();
--
1.8.1.4
prev parent reply other threads:[~2013-05-08 9:43 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-08 9:43 [Qemu-devel] [PATCH 1.5 0/5] ide: Test cases and a corner case fix Kevin Wolf
2013-05-08 9:43 ` [Qemu-devel] [PATCH 1/5] ide: Reset BMIDEA bit when the bus master is stopped Kevin Wolf
2013-05-08 14:35 ` Stefan Hajnoczi
2013-05-08 9:43 ` [Qemu-devel] [PATCH 2/5] libqos/pci: Enable bus mastering Kevin Wolf
2013-05-08 9:43 ` [Qemu-devel] [PATCH 3/5] qtest: Add IDE test case Kevin Wolf
2013-05-08 9:43 ` [Qemu-devel] [PATCH 4/5] qtest/ide-test: Add simple DMA read/write " Kevin Wolf
2013-05-08 16:28 ` Paolo Bonzini
2013-05-08 9:43 ` Kevin Wolf [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368006206-2602-6-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.