From: Anders Darander <anders.darander@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig
Date: Thu, 9 May 2013 22:31:28 +0200 [thread overview]
Message-ID: <1368131491-14115-3-git-send-email-anders.darander@gmail.com> (raw)
In-Reply-To: <1368131491-14115-1-git-send-email-anders.darander@gmail.com>
From: Anders Darander <anders@chargestorm.se>
This is to make it more similar to the old 3.2.9 defconfig.
Signed-off-by: Anders Darander <anders@chargestorm.se>
---
board/beaglebone/linux-3.8.config | 180 +++++++------------------------------
1 file changed, 33 insertions(+), 147 deletions(-)
diff --git a/board/beaglebone/linux-3.8.config b/board/beaglebone/linux-3.8.config
index 7bf52ed..c083c70 100644
--- a/board/beaglebone/linux-3.8.config
+++ b/board/beaglebone/linux-3.8.config
@@ -1,4 +1,5 @@
CONFIG_EXPERIMENTAL=y
+CONFIG_DEFAULT_HOSTNAME="beaglebone"
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_NO_HZ=y
@@ -8,21 +9,19 @@ CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
CONFIG_SLAB=y
CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
+CONFIG_OPROFILE=m
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_OMAP=y
-CONFIG_GPIO_PCA953X=y
CONFIG_OMAP_RESET_CLOCKS=y
CONFIG_OMAP_MUX_DEBUG=y
# CONFIG_ARCH_OMAP2 is not set
@@ -33,15 +32,14 @@ CONFIG_ARM_ERRATA_720789=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
-CONFIG_FPE_NWFPE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y
@@ -59,47 +57,16 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_C_CAN=m
-CONFIG_CAN_C_CAN_PLATFORM=m
-CONFIG_BT=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_OMAP_OCP2SCP=y
CONFIG_OMAP_INTERCONNECT=y
CONFIG_CONNECTOR=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_ONENAND=y
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SENSORS_TSL2550=m
-CONFIG_SENSORS_LIS3_I2C=m
+CONFIG_EEPROM_93CX6=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SCAN_ASYNC=y
@@ -107,33 +74,28 @@ CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI_PLATFORM=m
# CONFIG_ATA_SFF is not set
-CONFIG_MD=y
CONFIG_NETDEVICES=y
-CONFIG_KS8851=y
-CONFIG_KS8851_MLL=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_TI_CPSW=y
+# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_SMSC_PHY=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_SMSC95XX=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_DEBUG=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_MATRIX=m
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_MISC=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_8250=y
@@ -152,85 +114,25 @@ CONFIG_DEBUG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_TWL4030=y
CONFIG_W1=y
CONFIG_POWER_SUPPLY=y
-CONFIG_SENSORS_LM75=m
CONFIG_THERMAL=y
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
-CONFIG_PALMAS_WATCHDOG=y
CONFIG_OMAP_WATCHDOG=y
-CONFIG_TWL4030_WATCHDOG=y
CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65910=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL6040_CORE=y
-CONFIG_MFD_PALMAS=y
-CONFIG_MFD_PALMAS_GPADC=y
-CONFIG_MFD_PALMAS_PWM=y
-CONFIG_MFD_PALMAS_RESOURCE=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_DRM=y
-CONFIG_FIRMWARE_EDID=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_RFBI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_PANEL_GENERIC_DPI=m
-CONFIG_PANEL_SHARP_LS037V7DW01=m
-CONFIG_PANEL_NEC_NL8048HL11_01B=m
-CONFIG_PANEL_TAAL=m
-CONFIG_PANEL_TPO_TD043MTEA1=m
-CONFIG_PANEL_ACX565AKM=m
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_SOC=m
-CONFIG_SND_OMAP_SOC=m
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_USB=y
-CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_SUSPEND=y
-CONFIG_USB_DWC3=m
-CONFIG_USB_DWC3_DEBUG=y
-CONFIG_USB_DWC3_VERBOSE=y
CONFIG_USB_MON=y
CONFIG_USB_MUSB_HDRC=m
-CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
-CONFIG_USB_MUSB_DSPS=m
-CONFIG_MUSB_PIO_ONLY=y
-CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_TEST=y
CONFIG_OMAP_USB2=m
@@ -246,10 +148,6 @@ CONFIG_USB_ETH_EEM=y
CONFIG_USB_MASS_STORAGE=m
CONFIG_USB_G_MULTI=m
CONFIG_USB_G_MULTI_CDC=y
-CONFIG_TWL4030_USB=m
-CONFIG_TWL6030_USB=m
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_PALMAS_USB=m
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_SDIO_UART=y
@@ -266,15 +164,11 @@ CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_OMAP=y
CONFIG_DMADEVICES=y
CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
CONFIG_STAGING=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_NUM_CRTCS=3
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
@@ -284,18 +178,7 @@ CONFIG_QFMT_V2=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
@@ -305,11 +188,14 @@ CONFIG_TIMER_STATS=y
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y
--
1.7.10.4
next prev parent reply other threads:[~2013-05-09 20:31 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-09 20:31 [Buildroot] [PATCH 0/5] Upgrade BeagleBone kernel to 3.8 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 1/5] beaglebone: update to linux 3.8 Anders Darander
2013-05-10 22:44 ` Arnout Vandecappelle
2013-05-09 20:31 ` Anders Darander [this message]
2013-05-10 22:45 ` [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 3/5] am33x-cm3: add FW for suspend/resume Anders Darander
2013-05-10 22:56 ` Arnout Vandecappelle
2013-05-09 20:31 ` [Buildroot] [PATCH 4/5] beaglebone: add am33x-cm3 Anders Darander
2013-05-09 20:31 ` [Buildroot] [PATCH 5/5] beaglebone: enable NFS root Anders Darander
-- strict thread matches above, loose matches on Subject: below --
2013-05-11 4:38 [Buildroot] [PATCH 2/5] beaglebone: reduce defconfig Anders Darander
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1368131491-14115-3-git-send-email-anders.darander@gmail.com \
--to=anders.darander@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.