From: Cong Wang <amwang@redhat.com>
To: netdev@vger.kernel.org
Cc: Jesse Gross <jesse@nicira.com>,
Pravin B Shelar <pshelar@nicira.com>,
Stephen Hemminger <stephen@networkplumber.org>,
"David S. Miller" <davem@davemloft.net>,
Cong Wang <amwang@redhat.com>
Subject: [Patch net-next v9 11/11] ipv6: Add generic UDP Tunnel segmentation
Date: Mon, 27 May 2013 12:16:33 +0800 [thread overview]
Message-ID: <1369628193-14925-12-git-send-email-amwang@redhat.com> (raw)
In-Reply-To: <1369628193-14925-1-git-send-email-amwang@redhat.com>
From: Cong Wang <amwang@redhat.com>
Similar to commit 731362674580cb0c696cd1b1a03d8461a10cf90a
(tunneling: Add generic Tunnel segmentation)
This patch adds generic tunneling offloading support for
IPv6-UDP based tunnels.
This can be used by tunneling protocols like VXLAN.
Cc: Jesse Gross <jesse@nicira.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
---
net/ipv6/ip6_offload.c | 4 +-
net/ipv6/udp_offload.c | 153 +++++++++++++++++++++++++++++++++---------------
2 files changed, 108 insertions(+), 49 deletions(-)
diff --git a/net/ipv6/ip6_offload.c b/net/ipv6/ip6_offload.c
index 71b766e..87fbf2e 100644
--- a/net/ipv6/ip6_offload.c
+++ b/net/ipv6/ip6_offload.c
@@ -91,6 +91,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,
unsigned int unfrag_ip6hlen;
u8 *prevhdr;
int offset = 0;
+ bool tunnel;
if (unlikely(skb_shinfo(skb)->gso_type &
~(SKB_GSO_UDP |
@@ -105,6 +106,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,
if (unlikely(!pskb_may_pull(skb, sizeof(*ipv6h))))
goto out;
+ tunnel = skb->encapsulation;
ipv6h = ipv6_hdr(skb);
__skb_pull(skb, sizeof(*ipv6h));
segs = ERR_PTR(-EPROTONOSUPPORT);
@@ -125,7 +127,7 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,
ipv6h = ipv6_hdr(skb);
ipv6h->payload_len = htons(skb->len - skb->mac_len -
sizeof(*ipv6h));
- if (proto == IPPROTO_UDP) {
+ if (!tunnel && proto == IPPROTO_UDP) {
unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
fptr = (struct frag_hdr *)(skb_network_header(skb) +
unfrag_ip6hlen);
diff --git a/net/ipv6/udp_offload.c b/net/ipv6/udp_offload.c
index 3bb3a89..2c3fa3b 100644
--- a/net/ipv6/udp_offload.c
+++ b/net/ipv6/udp_offload.c
@@ -21,26 +21,79 @@ static int udp6_ufo_send_check(struct sk_buff *skb)
const struct ipv6hdr *ipv6h;
struct udphdr *uh;
- /* UDP Tunnel offload on ipv6 is not yet supported. */
- if (skb->encapsulation)
- return -EINVAL;
-
if (!pskb_may_pull(skb, sizeof(*uh)))
return -EINVAL;
- ipv6h = ipv6_hdr(skb);
- uh = udp_hdr(skb);
+ if (likely(!skb->encapsulation)) {
+ ipv6h = ipv6_hdr(skb);
+ uh = udp_hdr(skb);
+
+ uh->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr, skb->len,
+ IPPROTO_UDP, 0);
+ skb->csum_start = skb_transport_header(skb) - skb->head;
+ skb->csum_offset = offsetof(struct udphdr, check);
+ skb->ip_summed = CHECKSUM_PARTIAL;
+ }
- uh->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr, skb->len,
- IPPROTO_UDP, 0);
- skb->csum_start = skb_transport_header(skb) - skb->head;
- skb->csum_offset = offsetof(struct udphdr, check);
- skb->ip_summed = CHECKSUM_PARTIAL;
return 0;
}
+static struct sk_buff *skb_udp6_tunnel_segment(struct sk_buff *skb,
+ netdev_features_t features)
+{
+ struct sk_buff *segs = ERR_PTR(-EINVAL);
+ int mac_len = skb->mac_len;
+ int tnl_hlen = skb_inner_mac_header(skb) - skb_transport_header(skb);
+ int outer_hlen;
+ netdev_features_t enc_features;
+
+ if (unlikely(!pskb_may_pull(skb, tnl_hlen)))
+ goto out;
+
+ skb->encapsulation = 0;
+ __skb_pull(skb, tnl_hlen);
+ skb_reset_mac_header(skb);
+ skb_set_network_header(skb, skb_inner_network_offset(skb));
+ skb->mac_len = skb_inner_network_offset(skb);
+
+ /* segment inner packet. */
+ enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ segs = skb_mac_gso_segment(skb, enc_features);
+ if (!segs || IS_ERR(segs))
+ goto out;
+
+ outer_hlen = skb_tnl_header_len(skb);
+ skb = segs;
+ do {
+ struct udphdr *uh;
+ struct ipv6hdr *ipv6h;
+ int udp_offset = outer_hlen - tnl_hlen;
+ u32 len;
+
+ skb->mac_len = mac_len;
+
+ skb_push(skb, outer_hlen);
+ skb_reset_mac_header(skb);
+ skb_set_network_header(skb, mac_len);
+ skb_set_transport_header(skb, udp_offset);
+ uh = udp_hdr(skb);
+ uh->len = htons(skb->len - udp_offset);
+ ipv6h = ipv6_hdr(skb);
+ len = skb->len - udp_offset;
+
+ uh->check = ~csum_ipv6_magic(&ipv6h->saddr, &ipv6h->daddr,
+ len, IPPROTO_UDP, 0);
+ uh->check = csum_fold(skb_checksum(skb, udp_offset, len, 0));
+ if (uh->check == 0)
+ uh->check = CSUM_MANGLED_0;
+ skb->ip_summed = CHECKSUM_NONE;
+ } while ((skb = skb->next));
+out:
+ return segs;
+}
+
static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
- netdev_features_t features)
+ netdev_features_t features)
{
struct sk_buff *segs = ERR_PTR(-EINVAL);
unsigned int mss;
@@ -73,43 +126,47 @@ static struct sk_buff *udp6_ufo_fragment(struct sk_buff *skb,
goto out;
}
- /* Do software UFO. Complete and fill in the UDP checksum as HW cannot
- * do checksum of UDP packets sent as multiple IP fragments.
- */
- offset = skb_checksum_start_offset(skb);
- csum = skb_checksum(skb, offset, skb->len - offset, 0);
- offset += skb->csum_offset;
- *(__sum16 *)(skb->data + offset) = csum_fold(csum);
- skb->ip_summed = CHECKSUM_NONE;
-
- /* Check if there is enough headroom to insert fragment header. */
- if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) &&
- pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
- goto out;
+ if (skb->encapsulation && skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL)
+ segs = skb_udp6_tunnel_segment(skb, features);
+ else {
+ /* Do software UFO. Complete and fill in the UDP checksum as HW cannot
+ * do checksum of UDP packets sent as multiple IP fragments.
+ */
+ offset = skb_checksum_start_offset(skb);
+ csum = skb_checksum(skb, offset, skb->len - offset, 0);
+ offset += skb->csum_offset;
+ *(__sum16 *)(skb->data + offset) = csum_fold(csum);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Check if there is enough headroom to insert fragment header. */
+ if ((skb_mac_header(skb) < skb->head + frag_hdr_sz) &&
+ pskb_expand_head(skb, frag_hdr_sz, 0, GFP_ATOMIC))
+ goto out;
- /* Find the unfragmentable header and shift it left by frag_hdr_sz
- * bytes to insert fragment header.
- */
- unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
- nexthdr = *prevhdr;
- *prevhdr = NEXTHDR_FRAGMENT;
- unfrag_len = skb_network_header(skb) - skb_mac_header(skb) +
- unfrag_ip6hlen;
- mac_start = skb_mac_header(skb);
- memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len);
-
- skb->mac_header -= frag_hdr_sz;
- skb->network_header -= frag_hdr_sz;
-
- fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
- fptr->nexthdr = nexthdr;
- fptr->reserved = 0;
- ipv6_select_ident(fptr, (struct rt6_info *)skb_dst(skb));
-
- /* Fragment the skb. ipv6 header and the remaining fields of the
- * fragment header are updated in ipv6_gso_segment()
- */
- segs = skb_segment(skb, features);
+ /* Find the unfragmentable header and shift it left by frag_hdr_sz
+ * bytes to insert fragment header.
+ */
+ unfrag_ip6hlen = ip6_find_1stfragopt(skb, &prevhdr);
+ nexthdr = *prevhdr;
+ *prevhdr = NEXTHDR_FRAGMENT;
+ unfrag_len = skb_network_header(skb) - skb_mac_header(skb) +
+ unfrag_ip6hlen;
+ mac_start = skb_mac_header(skb);
+ memmove(mac_start-frag_hdr_sz, mac_start, unfrag_len);
+
+ skb->mac_header -= frag_hdr_sz;
+ skb->network_header -= frag_hdr_sz;
+
+ fptr = (struct frag_hdr *)(skb_network_header(skb) + unfrag_ip6hlen);
+ fptr->nexthdr = nexthdr;
+ fptr->reserved = 0;
+ ipv6_select_ident(fptr, (struct rt6_info *)skb_dst(skb));
+
+ /* Fragment the skb. ipv6 header and the remaining fields of the
+ * fragment header are updated in ipv6_gso_segment()
+ */
+ segs = skb_segment(skb, features);
+ }
out:
return segs;
--
1.7.7.6
next prev parent reply other threads:[~2013-05-27 4:18 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-27 4:16 [Patch net-next v9 00/11] vxlan: add ipv6 support Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 01/11] vxlan: defer vxlan init as late as possible Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 02/11] vxlan: use unsigned int instead of unsigned Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 03/11] ipv6: make ip6_dst_hoplimit() static inline Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 04/11] ipv6: move ip6_local_out into core kernel Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 05/11] ipv6: export a stub for IPv6 symbols used by vxlan Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 06/11] ipv6: export in6addr_loopback to modules Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 07/11] vxlan: add ipv6 support Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 08/11] vxlan: add ipv6 route short circuit support Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 09/11] vxlan: add ipv6 proxy support Cong Wang
2013-05-27 4:16 ` [Patch net-next v9 10/11] vxlan: respect scope_id for ll addr Cong Wang
2013-05-27 4:16 ` Cong Wang [this message]
2013-05-27 8:39 ` [Patch net-next v9 00/11] vxlan: add ipv6 support Bjørn Mork
2013-05-27 8:57 ` Bjørn Mork
2013-05-27 9:30 ` David Miller
2013-05-27 10:54 ` Cong Wang
2013-05-27 11:12 ` Cong Wang
2013-05-27 11:00 ` Cong Wang
2013-05-27 13:07 ` Bjørn Mork
2013-05-28 2:42 ` Cong Wang
2013-05-28 7:28 ` Bjørn Mork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369628193-14925-12-git-send-email-amwang@redhat.com \
--to=amwang@redhat.com \
--cc=davem@davemloft.net \
--cc=jesse@nicira.com \
--cc=netdev@vger.kernel.org \
--cc=pshelar@nicira.com \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.