From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: alsa-devel@alsa-project.org, patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 1/5] ASoC: wm8994: Add digital loopback paths
Date: Thu, 30 May 2013 13:42:26 +0100 [thread overview]
Message-ID: <1369917750-7322-1-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
There is loopback control within the audio interfaces, provide control of
this as there are some obscure scenarios where this could be used in
production.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
sound/soc/codecs/wm8994.c | 31 +++++++++++++++++++++++++++++--
1 file changed, 29 insertions(+), 2 deletions(-)
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 561c2f9..2081fa1 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -1499,6 +1499,24 @@ static const char *aif1dac_text[] = {
"AIF1DACDAT", "AIF3DACDAT",
};
+static const char *loopback_text[] = {
+ "None", "ADCDAT",
+};
+
+static const struct soc_enum aif1_loopback_enum =
+ SOC_ENUM_SINGLE(WM8994_AIF1_CONTROL_2, WM8994_AIF1_LOOPBACK_SHIFT, 2,
+ loopback_text);
+
+static const struct snd_kcontrol_new aif1_loopback =
+ SOC_DAPM_ENUM("AIF1 Loopback", aif1_loopback_enum);
+
+static const struct soc_enum aif2_loopback_enum =
+ SOC_ENUM_SINGLE(WM8994_AIF2_CONTROL_2, WM8994_AIF2_LOOPBACK_SHIFT, 2,
+ loopback_text);
+
+static const struct snd_kcontrol_new aif2_loopback =
+ SOC_DAPM_ENUM("AIF2 Loopback", aif2_loopback_enum);
+
static const struct soc_enum aif1dac_enum =
SOC_ENUM_SINGLE(WM8994_POWER_MANAGEMENT_6, 0, 2, aif1dac_text);
@@ -1745,6 +1763,9 @@ SND_SOC_DAPM_ADC("DMIC1R", NULL, WM8994_POWER_MANAGEMENT_4, 2, 0),
SND_SOC_DAPM_ADC("ADCL", NULL, SND_SOC_NOPM, 1, 0),
SND_SOC_DAPM_ADC("ADCR", NULL, SND_SOC_NOPM, 0, 0),
+SND_SOC_DAPM_MUX("AIF1 Loopback", SND_SOC_NOPM, 0, 0, &aif1_loopback),
+SND_SOC_DAPM_MUX("AIF2 Loopback", SND_SOC_NOPM, 0, 0, &aif2_loopback),
+
SND_SOC_DAPM_POST("Debug log", post_ev),
};
@@ -1876,9 +1897,9 @@ static const struct snd_soc_dapm_route intercon[] = {
{ "AIF1DAC2L", NULL, "AIF1DAC Mux" },
{ "AIF1DAC2R", NULL, "AIF1DAC Mux" },
- { "AIF1DAC Mux", "AIF1DACDAT", "AIF1DACDAT" },
+ { "AIF1DAC Mux", "AIF1DACDAT", "AIF1 Loopback" },
{ "AIF1DAC Mux", "AIF3DACDAT", "AIF3DACDAT" },
- { "AIF2DAC Mux", "AIF2DACDAT", "AIF2DACDAT" },
+ { "AIF2DAC Mux", "AIF2DACDAT", "AIF2 Loopback" },
{ "AIF2DAC Mux", "AIF3DACDAT", "AIF3DACDAT" },
{ "AIF2ADC Mux", "AIF2ADCDAT", "AIF2ADCL" },
{ "AIF2ADC Mux", "AIF2ADCDAT", "AIF2ADCR" },
@@ -1929,6 +1950,12 @@ static const struct snd_soc_dapm_route intercon[] = {
{ "AIF3ADCDAT", "AIF2DACDAT", "AIF2DACL" },
{ "AIF3ADCDAT", "AIF2DACDAT", "AIF2DACR" },
+ /* Loopback */
+ { "AIF1 Loopback", "ADCDAT", "AIF1ADCDAT" },
+ { "AIF1 Loopback", "None", "AIF1DACDAT" },
+ { "AIF2 Loopback", "ADCDAT", "AIF2ADCDAT" },
+ { "AIF2 Loopback", "None", "AIF2DACDAT" },
+
/* Sidetone */
{ "Left Sidetone", "ADC/DMIC1", "ADCL Mux" },
{ "Left Sidetone", "DMIC2", "DMIC2L" },
--
1.7.10.4
next reply other threads:[~2013-05-30 12:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-30 12:42 Mark Brown [this message]
2013-05-30 12:42 ` [PATCH 2/5] ASoC: wm8994: Ensure microphone detection state is reset on removal Mark Brown
2013-05-30 12:46 ` Mark Brown
2013-05-30 12:42 ` [PATCH 3/5] ASoC: wm8994: Avoid leaking pm_runtime reference on removed jack race Mark Brown
2013-05-30 12:42 ` [PATCH 4/5] ASoC: wm8994: Allow debounce before MICDET identification Mark Brown
2013-05-30 12:42 ` [PATCH 5/5] ASoC: wm8994: Reove unused variable Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1369917750-7322-1-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=liam.r.girdwood@linux.intel.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.