From: Benjamin Herrenschmidt <benh@kernel.crashing.org>
To: Zang Roy-R61911 <r61911@freescale.com>
Cc: Xie Shaohui-B21989 <B21989@freescale.com>,
Liu Qiang-B32616 <B32616@freescale.com>,
Timur Tabi <timur@tabi.org>,
"tiejun.chen" <tiejun.chen@windriver.com>,
Fleming Andy-AFLEMING <afleming@freescale.com>,
Bhushan Bharat-R65777 <R65777@freescale.com>,
"linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>
Subject: Re: SATA FSL and upstreaming
Date: Fri, 07 Jun 2013 14:47:06 +1000 [thread overview]
Message-ID: <1370580426.3766.349.camel@pasglop> (raw)
In-Reply-To: <3E027F8168735B46AC006B1D0C7BB0020B2135A0@039-SN2MPN1-012.039d.mgd.msft.net>
On Fri, 2013-06-07 at 04:45 +0000, Zang Roy-R61911 wrote:
>
> > Forget it, reset all the jumpers to the default setup (found the doc !)
> > and they come up now in slot 4 and 7. It also looks like uBoot now has an
> > e1000 driver so I don't have to use fman (for which I believe there is
> > still no upstream driver right ?)
> fman in u-boot has been up streamed. It should work.
I don't care much about u-boot :-) It's the kernel that matters to me.
> >
> > BTW. Is that normal during boot ?
> >
> > Net: Initializing Fman
> > Fman1: Uploading microcode version 106.1.7 PHY reset timed out PHY reset
> > timed out PHY reset timed out PHY reset timed out
> You can ignore the timeout.
> Do you plug other card (for example SGMII card) on the board?
No, only PCIe in slot 4 and 7.
> u-boot detects some card in the slot and tries to init the PHY but fails.
Cheers,
Ben.
next prev parent reply other threads:[~2013-06-07 4:47 UTC|newest]
Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-16 4:47 SATA FSL and upstreaming Benjamin Herrenschmidt
2013-05-16 5:45 ` Benjamin Herrenschmidt
2013-05-16 5:55 ` tiejun.chen
2013-05-16 6:06 ` Benjamin Herrenschmidt
2013-05-16 5:59 ` Zang Roy-R61911
2013-05-16 6:01 ` Bhushan Bharat-R65777
2013-05-16 6:05 ` Zang Roy-R61911
2013-05-16 6:09 ` Benjamin Herrenschmidt
2013-05-16 6:17 ` tiejun.chen
2013-05-16 6:20 ` Zang Roy-R61911
2013-05-16 6:25 ` tiejun.chen
2013-05-16 7:20 ` Zang Roy-R61911
2013-05-16 6:26 ` Benjamin Herrenschmidt
2013-05-16 6:21 ` Benjamin Herrenschmidt
2013-05-16 6:35 ` tiejun.chen
2013-05-16 6:37 ` Zang Roy-R61911
2013-05-16 6:40 ` Benjamin Herrenschmidt
2013-05-16 6:43 ` tiejun.chen
2013-05-16 6:48 ` Bhushan Bharat-R65777
2013-05-16 6:49 ` Zang Roy-R61911
2013-05-16 6:53 ` Benjamin Herrenschmidt
2013-05-16 6:56 ` tiejun.chen
2013-05-16 7:01 ` Zang Roy-R61911
2013-05-16 7:05 ` Benjamin Herrenschmidt
2013-05-16 7:13 ` Bhushan Bharat-R65777
2013-05-16 7:26 ` Benjamin Herrenschmidt
2013-05-16 7:20 ` Xie Shaohui-B21989
2013-05-16 7:25 ` Bhushan Bharat-R65777
2013-05-16 6:59 ` Benjamin Herrenschmidt
2013-05-16 7:17 ` Zang Roy-R61911
2013-05-16 6:52 ` Benjamin Herrenschmidt
2013-05-16 14:56 ` Timur Tabi
2013-06-07 3:52 ` Benjamin Herrenschmidt
2013-06-07 4:39 ` Benjamin Herrenschmidt
2013-06-07 4:45 ` Zang Roy-R61911
2013-06-07 4:47 ` Benjamin Herrenschmidt [this message]
2013-06-07 4:50 ` Zang Roy-R61911
2013-06-07 7:41 ` fsqrt Benjamin Herrenschmidt
2013-06-07 7:45 ` fsqrt Zang Roy-R61911
2013-06-07 8:53 ` fsqrt Benjamin Herrenschmidt
2013-06-07 8:59 ` fsqrt Benjamin Herrenschmidt
2013-06-07 10:48 ` fsqrt David Laight
2013-06-07 12:14 ` fsqrt Benjamin Herrenschmidt
2013-06-07 19:19 ` fsqrt Kumar Gala
2013-06-07 23:23 ` fsqrt Benjamin Herrenschmidt
2013-06-07 23:25 ` fsqrt Benjamin Herrenschmidt
2013-06-07 23:30 ` fsqrt Benjamin Herrenschmidt
2013-06-08 0:20 ` fsqrt Dan Malek
2013-06-08 0:34 ` fsqrt Benjamin Herrenschmidt
2013-06-08 1:13 ` fsqrt Dan Malek
2013-06-08 4:31 ` fsqrt Benjamin Herrenschmidt
2013-06-09 6:32 ` fsqrt Benjamin Herrenschmidt
2013-06-07 7:46 ` fsqrt tiejun.chen
2013-06-07 8:53 ` fsqrt Benjamin Herrenschmidt
2013-06-07 9:02 ` fsqrt tiejun.chen
2013-06-07 12:07 ` fsqrt Benjamin Herrenschmidt
2013-06-07 7:05 ` FSL 64-bit DMA window question Benjamin Herrenschmidt
2013-06-07 7:58 ` Zang Roy-R61911
2013-06-07 8:55 ` Benjamin Herrenschmidt
2013-06-07 9:44 ` Zang Roy-R61911
2013-06-07 12:09 ` Benjamin Herrenschmidt
[not found] ` <1370642488.6813.15@snotra>
2013-06-07 22:02 ` Scott Wood
2013-06-07 22:09 ` Benjamin Herrenschmidt
2013-06-07 22:34 ` Scott Wood
2013-06-07 22:39 ` Benjamin Herrenschmidt
2013-06-07 23:29 ` Scott Wood
2013-06-07 23:33 ` Benjamin Herrenschmidt
2013-06-07 12:09 ` SATA FSL and upstreaming Timur Tabi
2013-05-16 6:17 ` Zang Roy-R61911
2013-05-16 6:23 ` Benjamin Herrenschmidt
2013-05-16 6:33 ` Bhushan Bharat-R65777
2013-05-16 6:34 ` Benjamin Herrenschmidt
2013-05-16 6:35 ` Zang Roy-R61911
2013-05-16 6:37 ` Benjamin Herrenschmidt
2013-05-16 6:41 ` tiejun.chen
2013-05-16 6:48 ` Zang Roy-R61911
2013-05-16 6:24 ` Xie Shaohui-B21989
2013-05-16 6:31 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1370580426.3766.349.camel@pasglop \
--to=benh@kernel.crashing.org \
--cc=B21989@freescale.com \
--cc=B32616@freescale.com \
--cc=R65777@freescale.com \
--cc=afleming@freescale.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=r61911@freescale.com \
--cc=tiejun.chen@windriver.com \
--cc=timur@tabi.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.