diff for duplicates of <1370904753.18413.19@snotra> diff --git a/a/1.txt b/N1/1.txt index b4cfdf9..22aba64 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,7 +1,7 @@ On 06/10/2013 12:07:43 PM, Michael Guntsche wrote: > Good evening, ->=20 -> On Mon, Jun 10, 2013 at 1:41 PM, Rojhalat Ibrahim <imr@rtschenk.de> =20 +> +> On Mon, Jun 10, 2013 at 1:41 PM, Rojhalat Ibrahim <imr@rtschenk.de> > wrote: > > Hi Mike, > > @@ -21,28 +21,28 @@ On 06/10/2013 12:07:43 PM, Michael Guntsche wrote: > >> Reverting this commit allowed my board to boot again. > >> > >> @Rojhalat: Please have a look at -> >> http://marc.info/?l=3Dlinux-kernel&m=3D137071294204858&w=3D2 +> >> http://marc.info/?l=linux-kernel&m=137071294204858&w=2 > >> for my initial bugreport. > >> -> >> What I do not understand at all is why this is affecting my =20 +> >> What I do not understand at all is why this is affecting my > platform. -> >> AFAIK there is no PCIe hardware on it AND I completely disabled =20 +> >> AFAIK there is no PCIe hardware on it AND I completely disabled > PCIe > >> support in config. > >> > >> Kind regards, > >> Mike ->=20 +> > This patch does not fix the problem, during boot the kernel still > panics. I had a closer look at the commit and the following patch > fixes it for me.... ->=20 -> diff --git a/arch/powerpc/sysdev/fsl_pci.c =20 +> +> diff --git a/arch/powerpc/sysdev/fsl_pci.c > b/arch/powerpc/sysdev/fsl_pci.c > index 028ac1f..21b687f 100644 > --- a/arch/powerpc/sysdev/fsl_pci.c > +++ b/arch/powerpc/sysdev/fsl_pci.c -> @@ -814,7 +814,7 @@ int __init mpc83xx_add_bridge(struct device_node =20 +> @@ -814,7 +814,7 @@ int __init mpc83xx_add_bridge(struct device_node > *dev) > if (ret) > goto err0; @@ -52,8 +52,8 @@ On 06/10/2013 12:07:43 PM, Michael Guntsche wrote: > rsrc_cfg.start + 4, 0); > } -The only difference here is that you're not setting hose->ops to =20 -fsl_indirect_pci_ops. Do you know why that is helping, and what =20 +The only difference here is that you're not setting hose->ops to +fsl_indirect_pci_ops. Do you know why that is helping, and what hose->ops is set to instead? --Scott= +-Scott diff --git a/a/content_digest b/N1/content_digest index 92869f8..f8e55fa 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -5,15 +5,15 @@ "Subject\0Re: [BUG] PCI related panic on powerpc based board with 3.10-rcX\0" "Date\0Mon, 10 Jun 2013 17:52:33 -0500\0" "To\0Michael Guntsche <michael.guntsche@it-loops.com>\0" - "Cc\0linuxppc-dev@lists.ozlabs.org" - Rojhalat Ibrahim <imr@rtschenk.de> - " linux-kernel@vger.kernel.org\0" + "Cc\0Rojhalat Ibrahim <imr@rtschenk.de>" + <linuxppc-dev@lists.ozlabs.org> + " <linux-kernel@vger.kernel.org>\0" "\00:1\0" "b\0" "On 06/10/2013 12:07:43 PM, Michael Guntsche wrote:\n" "> Good evening,\n" - ">=20\n" - "> On Mon, Jun 10, 2013 at 1:41 PM, Rojhalat Ibrahim <imr@rtschenk.de> =20\n" + "> \n" + "> On Mon, Jun 10, 2013 at 1:41 PM, Rojhalat Ibrahim <imr@rtschenk.de> \n" "> wrote:\n" "> > Hi Mike,\n" "> >\n" @@ -33,28 +33,28 @@ "> >> Reverting this commit allowed my board to boot again.\n" "> >>\n" "> >> @Rojhalat: Please have a look at\n" - "> >> http://marc.info/?l=3Dlinux-kernel&m=3D137071294204858&w=3D2\n" + "> >> http://marc.info/?l=linux-kernel&m=137071294204858&w=2\n" "> >> for my initial bugreport.\n" "> >>\n" - "> >> What I do not understand at all is why this is affecting my =20\n" + "> >> What I do not understand at all is why this is affecting my \n" "> platform.\n" - "> >> AFAIK there is no PCIe hardware on it AND I completely disabled =20\n" + "> >> AFAIK there is no PCIe hardware on it AND I completely disabled \n" "> PCIe\n" "> >> support in config.\n" "> >>\n" "> >> Kind regards,\n" "> >> Mike\n" - ">=20\n" + "> \n" "> This patch does not fix the problem, during boot the kernel still\n" "> panics. I had a closer look at the commit and the following patch\n" "> fixes it for me....\n" - ">=20\n" - "> diff --git a/arch/powerpc/sysdev/fsl_pci.c =20\n" + "> \n" + "> diff --git a/arch/powerpc/sysdev/fsl_pci.c \n" "> b/arch/powerpc/sysdev/fsl_pci.c\n" "> index 028ac1f..21b687f 100644\n" "> --- a/arch/powerpc/sysdev/fsl_pci.c\n" "> +++ b/arch/powerpc/sysdev/fsl_pci.c\n" - "> @@ -814,7 +814,7 @@ int __init mpc83xx_add_bridge(struct device_node =20\n" + "> @@ -814,7 +814,7 @@ int __init mpc83xx_add_bridge(struct device_node \n" "> *dev)\n" "> if (ret)\n" "> goto err0;\n" @@ -64,10 +64,10 @@ "> rsrc_cfg.start + 4, 0);\n" "> }\n" "\n" - "The only difference here is that you're not setting hose->ops to =20\n" - "fsl_indirect_pci_ops. Do you know why that is helping, and what =20\n" + "The only difference here is that you're not setting hose->ops to \n" + "fsl_indirect_pci_ops. Do you know why that is helping, and what \n" "hose->ops is set to instead?\n" "\n" - -Scott= + -Scott -fb775e71163dd7dccc70ca9fd02cb59e72a3b7854878287c15852107bd3c35fc +1ed1f9409a7933edd7a4bb51f609340740f36b5710dcb72bba10912b3a1be2ee
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.