From mboxrd@z Thu Jan 1 00:00:00 1970 From: shc_work@mail.ru (=?UTF-8?B?QWxleGFuZGVyIFNoaXlhbg==?=) Date: Tue, 02 Jul 2013 20:27:49 +0400 Subject: =?UTF-8?B?UmU6IFtQQVRDSCB2MyA1LzVdIEFSTTogZHRzOiBBZGQgZGV2aWNlIHRyZWUg?= =?UTF-8?B?c3VwcG9ydCBmb3IgcGh5Y2FyZCBwY2ExMDA=?= In-Reply-To: <1372431037-13519-6-git-send-email-mpa@pengutronix.de> References: <1372431037-13519-1-git-send-email-mpa@pengutronix.de> <1372431037-13519-6-git-send-email-mpa@pengutronix.de> Message-ID: <1372782469.486055292@f129.mail.ru> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org > Board files for Phytec phyCARD-S "System on Module" and "Rapid > Development Kit". > > Based on patches from: > > Steffen Trumtrar : > - Original patch > - ARM: dts: Set partition offsets for phycard > - ARM: dts: Use CSPI1 instead of CSPI2 on phycard pca100 > - ARM: imx27-phytec-phycard-S.dts: resize nand partitions ... > diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts ... > +&i2c1 { > + status = "okay"; > + > + ioexpander at 41 { > + compatible = "nxp,pca9536"; > + reg = <0x41>; > + }; > + > + rtc at 51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + lm75 at 4a { > + compatible = "national,lm75"; > + reg = <0x4a>; > + }; > + > + rtc at 51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; Really two identical RTC on I2C1 & I2C2 or it is typo? --- From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?B?QWxleGFuZGVyIFNoaXlhbg==?= Subject: =?UTF-8?B?UmU6IFtQQVRDSCB2MyA1LzVdIEFSTTogZHRzOiBBZGQgZGV2aWNlIHRyZWUg?= =?UTF-8?B?c3VwcG9ydCBmb3IgcGh5Y2FyZCBwY2ExMDA=?= Date: Tue, 02 Jul 2013 20:27:49 +0400 Message-ID: <1372782469.486055292@f129.mail.ru> References: <1372431037-13519-1-git-send-email-mpa@pengutronix.de> <1372431037-13519-6-git-send-email-mpa@pengutronix.de> Reply-To: =?UTF-8?B?QWxleGFuZGVyIFNoaXlhbg==?= Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1372431037-13519-6-git-send-email-mpa-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: devicetree-discuss-bounces+gldd-devicetree-discuss=m.gmane.org-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org Sender: "devicetree-discuss" To: =?UTF-8?B?TWFya3VzIFBhcmdtYW5u?= Cc: =?UTF-8?B?RmFiaW8gRXN0ZXZhbQ==?= , =?UTF-8?B?U3RlZmZlbiBUcnVtdHJhcg==?= , devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org, =?UTF-8?B?U2FzY2hhIEhhdWVy?= , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org > Board files for Phytec phyCARD-S "System on Module" and "Rapid > Development Kit". > > Based on patches from: > > Steffen Trumtrar : > - Original patch > - ARM: dts: Set partition offsets for phycard > - ARM: dts: Use CSPI1 instead of CSPI2 on phycard pca100 > - ARM: imx27-phytec-phycard-S.dts: resize nand partitions ... > diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dts ... > +&i2c1 { > + status = "okay"; > + > + ioexpander@41 { > + compatible = "nxp,pca9536"; > + reg = <0x41>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; > +}; > + > +&i2c2 { > + status = "okay"; > + > + lm75@4a { > + compatible = "national,lm75"; > + reg = <0x4a>; > + }; > + > + rtc@51 { > + compatible = "nxp,pcf8563"; > + reg = <0x51>; > + }; Really two identical RTC on I2C1 & I2C2 or it is typo? ---