From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org, sameo@linux.intel.com
Cc: alsa-devel@alsa-project.org, tiwai@suse.de,
patches@opensource.wolfsonmicro.com, lgirdwood@gmail.com,
Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Subject: [PATCH v3 2/2] ASoC: arizona: Add signal activity output for DRC
Date: Thu, 4 Jul 2013 08:56:28 +0100 [thread overview]
Message-ID: <1372924588-14666-2-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1372924588-14666-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
When doing signal activity detection, the only output from the DRC will
often be a GPIO pin. This patch adds a signal activity output that is
activated when a GPIO is configured to output the DRC signal activity
detection.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
sound/soc/codecs/arizona.c | 33 +++++++++++++++++++++++++++++++++
sound/soc/codecs/arizona.h | 1 +
sound/soc/codecs/wm5102.c | 6 ++++++
sound/soc/codecs/wm5110.c | 9 +++++++++
4 files changed, 49 insertions(+), 0 deletions(-)
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c
index 389f232..eb5c80d 100644
--- a/sound/soc/codecs/arizona.c
+++ b/sound/soc/codecs/arizona.c
@@ -19,6 +19,7 @@
#include <sound/tlv.h>
#include <linux/mfd/arizona/core.h>
+#include <linux/mfd/arizona/gpio.h>
#include <linux/mfd/arizona/registers.h>
#include "arizona.h"
@@ -223,6 +224,38 @@ int arizona_init_spk(struct snd_soc_codec *codec)
}
EXPORT_SYMBOL_GPL(arizona_init_spk);
+int arizona_init_gpio(struct snd_soc_codec *codec)
+{
+ struct arizona_priv *priv = snd_soc_codec_get_drvdata(codec);
+ struct arizona *arizona = priv->arizona;
+ int i;
+
+ switch (arizona->type) {
+ case WM5110:
+ snd_soc_dapm_disable_pin(&codec->dapm, "DRC2 Signal Activity");
+ }
+
+ snd_soc_dapm_disable_pin(&codec->dapm, "DRC1 Signal Activity");
+
+ for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
+ switch (arizona->pdata.gpio_defaults[i] & ARIZONA_GPN_FN_MASK) {
+ case ARIZONA_GP_FN_DRC1_SIGNAL_DETECT:
+ snd_soc_dapm_enable_pin(&codec->dapm,
+ "DRC1 Signal Activity");
+ break;
+ case ARIZONA_GP_FN_DRC2_SIGNAL_DETECT:
+ snd_soc_dapm_enable_pin(&codec->dapm,
+ "DRC2 Signal Activity");
+ break;
+ default:
+ break;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(arizona_init_gpio);
+
const char *arizona_mixer_texts[ARIZONA_NUM_MIXER_INPUTS] = {
"None",
"Tone Generator 1",
diff --git a/sound/soc/codecs/arizona.h b/sound/soc/codecs/arizona.h
index af39f10..fe8bd3d 100644
--- a/sound/soc/codecs/arizona.h
+++ b/sound/soc/codecs/arizona.h
@@ -241,6 +241,7 @@ extern int arizona_set_fll(struct arizona_fll *fll, int source,
unsigned int Fref, unsigned int Fout);
extern int arizona_init_spk(struct snd_soc_codec *codec);
+extern int arizona_init_gpio(struct snd_soc_codec *codec);
extern int arizona_init_dai(struct arizona_priv *priv, int dai);
diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c
index 100fdad..20e11f1 100644
--- a/sound/soc/codecs/wm5102.c
+++ b/sound/soc/codecs/wm5102.c
@@ -967,6 +967,8 @@ SND_SOC_DAPM_INPUT("IN2R"),
SND_SOC_DAPM_INPUT("IN3L"),
SND_SOC_DAPM_INPUT("IN3R"),
+SND_SOC_DAPM_OUTPUT("DRC1 Signal Activity"),
+
SND_SOC_DAPM_PGA_E("IN1L PGA", ARIZONA_INPUT_ENABLES, ARIZONA_IN1L_ENA_SHIFT,
0, NULL, 0, arizona_in_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD |
@@ -1468,6 +1470,9 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = {
{ "SPKDAT1R", NULL, "OUT5R" },
{ "MICSUPP", NULL, "SYSCLK" },
+
+ { "DRC1 Signal Activity", NULL, "DRC1L" },
+ { "DRC1 Signal Activity", NULL, "DRC1R" },
};
static int wm5102_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
@@ -1578,6 +1583,7 @@ static int wm5102_codec_probe(struct snd_soc_codec *codec)
return ret;
arizona_init_spk(codec);
+ arizona_init_gpio(codec);
snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS");
diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c
index 88ad7db..f36f9bd 100644
--- a/sound/soc/codecs/wm5110.c
+++ b/sound/soc/codecs/wm5110.c
@@ -414,6 +414,9 @@ SND_SOC_DAPM_INPUT("IN3R"),
SND_SOC_DAPM_INPUT("IN4L"),
SND_SOC_DAPM_INPUT("IN4R"),
+SND_SOC_DAPM_OUTPUT("DRC1 Signal Activity"),
+SND_SOC_DAPM_OUTPUT("DRC2 Signal Activity"),
+
SND_SOC_DAPM_PGA_E("IN1L PGA", ARIZONA_INPUT_ENABLES, ARIZONA_IN1L_ENA_SHIFT,
0, NULL, 0, arizona_in_ev,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD |
@@ -871,6 +874,11 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = {
{ "SPKDAT2R", NULL, "OUT6R" },
{ "MICSUPP", NULL, "SYSCLK" },
+
+ { "DRC1 Signal Activity", NULL, "DRC1L" },
+ { "DRC1 Signal Activity", NULL, "DRC1R" },
+ { "DRC2 Signal Activity", NULL, "DRC2L" },
+ { "DRC2 Signal Activity", NULL, "DRC2R" },
};
static int wm5110_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
@@ -978,6 +986,7 @@ static int wm5110_codec_probe(struct snd_soc_codec *codec)
return ret;
arizona_init_spk(codec);
+ arizona_init_gpio(codec);
snd_soc_dapm_disable_pin(&codec->dapm, "HAPTICS");
--
1.7.2.5
next prev parent reply other threads:[~2013-07-04 8:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-04 7:56 [PATCH v3 1/2] mfd: arizona: Add GPIO control register bit definitions Charles Keepax
2013-07-04 7:56 ` Charles Keepax [this message]
2013-07-04 10:24 ` [PATCH v3 2/2] ASoC: arizona: Add signal activity output for DRC Mark Brown
2013-07-04 8:49 ` [PATCH v3 1/2] mfd: arizona: Add GPIO control register bit definitions Mark Brown
2013-07-04 10:11 ` Charles Keepax
2013-07-04 10:23 ` Mark Brown
2013-07-04 10:24 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1372924588-14666-2-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.