All of lore.kernel.org
 help / color / mirror / Atom feed
From: Scott Jiang <scott.jiang.linux@gmail.com>
To: <mchehab@redhat.com>, <s.nawrocki@samsung.com>, <hverkuil@xs4all.nl>
Cc: <linux-media@vger.kernel.org>,
	<uclinux-dist-devel@blackfin.uclinux.org>,
	Scott Jiang <scott.jiang.linux@gmail.com>
Subject: [PATCH RFC v4 0/1] [media] blackfin: add video display device driver
Date: Fri, 19 Jul 2013 15:27:48 -0400	[thread overview]
Message-ID: <1374262068-32563-2-git-send-email-scott.jiang.linux@gmail.com> (raw)
In-Reply-To: <1374262068-32563-1-git-send-email-scott.jiang.linux@gmail.com>

v4l2-compliance output for this driver

root:/> v4l2-compliance -d 0
Driver Info:bfin_display bfin_display.0: =================  START STATUS  =================

        Driver name   : bfin_display
        Card type     : BF609
        Bus info      : platform:bfin_display
        Driver version: 3.5.0
        Capabilities  : 0x84000002
                Video Output
                Streaming
                Device Capabilities
        Device Caps   : 0x04000002
                Video Output
                Streaming

Compliance test for device /dev/video0 (not using libv4l2):

Required ioctls:
        test VIDIOC_QUERYCAP: OK

Allow for multiple opens:
        test second video open: OK
        test VIDIOC_QUERYCAP: OK
        test VIDIOC_G/S_PRIORITY: OK

Debug ioctls:
        test VIDIOC_DBG_G_CHIP_IDENT: OK (Not Supported)
        test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
adv7511 0-0039: power off
adv7511 0-0039: detected hotplug, detected Rx Sense, no EDID (0 block(s))
adv7511 0-0039: state: in reset, error: no error, detect count: 0, msk/irq: c4/c0
adv7511 0-0039: RGB quantization: full range
adv7511 0-0039: timings: 1280x720p60 (1650x750). Pix freq. = 74250000 Hz. Polarities = 0x3
adv7511 0-0039: edid_i2_addr: 0x7e
bfin_display bfin_display.0: ==================  END STATUS  ==================
        test VIDIOC_LOG_STATUS: OK

Input ioctls:
        test VIDIOC_G/S_TUNER: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
        test VIDIOC_ENUMAUDIO: OK (Not Supported)
        test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
        test VIDIOC_G/S_AUDIO: OK (Not Supported)
        Inputs: 0 Audio Inputs: 0 Tuners: 0

Output ioctls:
        test VIDIOC_G/S_MODULATOR: OK (Not Supported)
        test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
        test VIDIOC_ENUMAUDOUT: OK (Not Supported)
        test VIDIOC_G/S/ENUMOUTPUT: OK
        test VIDIOC_G/S_AUDOUT: OK (Not Supported)
        Outputs: 1 Audio Outputs: 0 Modulators: 0

Control ioctls:
        test VIDIOC_QUERYCTRL/MENU: OK
        test VIDIOC_G/S_CTRL: OK
                fail: v4l2-test-controls.cpp(511): g_ext_ctrls does not support count == 0
        test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL
        test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
        test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
        Standard Controls: 0 Private Controls: 0

Input/Output configuration ioctls:
                fail: v4l2-test-io-config.cpp(65): could set standard to ATSC, which is not supported anymore
                fail: v4l2-test-io-config.cpp(148): STD failed for output 0.
        test VIDIOC_ENUM/G/S/QUERY_STD: FAIL
        test VIDIOC_ENUM/G/S/QUERY_DV_PRESETS: OK (Not Supported)
                fail: v4l2-test-io-config.cpp(287): TIMINGS cap set, but no timings can be enumerated
                fail: v4l2-test-io-config.cpp(337): Timings check failed for output 0.
        test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: FAIL
                fail: v4l2-test-io-config.cpp(350): TIMINGS cap set, but could not get timings caps
                fail: v4l2-test-io-config.cpp(401): Timings cap check failed for output 0.
        test VIDIOC_DV_TIMINGS_CAP: FAIL

Format ioctls:
        test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
        test VIDIOC_G/S_PARM: OK (Not Supported)
        test VIDIOC_G_FBUF: OK (Not Supported)
        test VIDIOC_G_FMT: OK
                fail: v4l2-test-formats.cpp(379): unknown pixelformat ffffffff for buftype 2
                fail: v4l2-test-formats.cpp(566): Video Output is valid, but TRY_FMT failed to return a format
        test VIDIOC_TRY_FMT: FAIL
                fail: v4l2-test-formats.cpp(379): unknown pixelformat ffffffff for buftype 2
                fail: v4l2-test-formats.cpp(719): Video Output is valid, but no S_FMT was implemented
        test VIDIOC_S_FMT: FAIL
        test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)

Codec ioctls:
        test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
        test VIDIOC_G_ENC_INDEX: OK (Not Supported)
        test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)

Buffer ioctls:
        test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK

Total: 38, Succeeded: 32, Failed: 6, Warnings: 1



  reply	other threads:[~2013-07-19  6:25 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-19 19:27 [PATCH RFC v4 1/1] [media] blackfin: add video display device driver Scott Jiang
2013-07-19 19:27 ` Scott Jiang [this message]
2013-08-08 11:39 ` Hans Verkuil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374262068-32563-2-git-send-email-scott.jiang.linux@gmail.com \
    --to=scott.jiang.linux@gmail.com \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@redhat.com \
    --cc=s.nawrocki@samsung.com \
    --cc=uclinux-dist-devel@blackfin.uclinux.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.