From mboxrd@z Thu Jan 1 00:00:00 1970 From: Richard Zhao Subject: [PATCH] serial: tegra: correct help message in Kconfig from 'ttyHS' to 'ttyTHS' Date: Sun, 21 Jul 2013 10:43:27 +0800 Message-ID: <1374374607-31183-2-git-send-email-rizhao@nvidia.com> References: <1374374607-31183-1-git-send-email-rizhao@nvidia.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from hqemgate03.nvidia.com ([216.228.121.140]:6351 "EHLO hqemgate03.nvidia.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754844Ab3GUCnm (ORCPT ); Sat, 20 Jul 2013 22:43:42 -0400 In-Reply-To: <1374374607-31183-1-git-send-email-rizhao@nvidia.com> Sender: linux-serial-owner@vger.kernel.org List-Id: linux-serial@vger.kernel.org To: linux-serial@vger.kernel.org, linux-tegra@vger.kernel.org Cc: gregkh@linuxfoundation.org, jslaby@suse.cz, swarren@wwwdotorg.org, ldewangan@nvidia.com, Richard Zhao ttyTHS is consistent with the name used in driver. Signed-off-by: Richard Zhao --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 5e3d689..1456673 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -277,7 +277,7 @@ config SERIAL_TEGRA select SERIAL_CORE help Support for the on-chip UARTs on the NVIDIA Tegra series SOCs - providing /dev/ttyHS0, 1, 2, 3 and 4 (note, some machines may not + providing /dev/ttyTHS0, 1, 2, 3 and 4 (note, some machines may not provide all of these ports, depending on how the serial port are enabled). This driver uses the APB DMA to achieve higher baudrate and better performance. -- 1.8.1.5