Re: [PATCH v2 3/3] powerpc/85xx: Add C293PCIE board support

[Scott Wood <scottwood@freescale.com>]

On 07/25/2013 09:41:19 PM, Po Liu wrote:
> +		partition@1900000 {
> +			/* 7MB for User Area */
> +			reg =3D <0x01900000 0x00700000>;
> +			label =3D "NAND User area";
> +		};
> +
> +		partition@2000000 {
> +			/* 96MB for Root File System */
> +			reg =3D <0x02000000 0x06000000>;
> +			label =3D "NAND Root File System";
> +		};
> +
> +		partition@8000000 {
> +			/* 3968MB for Others */
> +			reg =3D <0x08000000 0xF8000000>;
> +			label =3D "NAND Others";
> +		};

Again, what is the difference between "user area" and "others"?  I'm =20
not even sure why it needs to be separate from "root file system", but =20
at least the root filesystem should be larger given the size of the =20
overall flash.

Also please use lowercase for hex.

> +	};
> +
> +	cpld@2,0 {
> +		#address-cells =3D <1>;
> +		#size-cells =3D <1>;
> +		compatible =3D "fsl,c293pcie-cpld";
> +		reg =3D <0x2 0x0 0x20>;
> +	};

Remove #address-cells/#size-cells

> +			partition@580000 {
> +				/* 10.5MB for Compressed RFS Image */
> +				reg =3D <0x00580000 0x00a80000>;
> +				label =3D "SPI Flash Compressed RFSImage";
> +			};

Space before "Image".  Why specifiy that it's compressed, versus some =20
other filesystem type?

-Scott=