All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chin Liang See <clsee@altera.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RESEND PATCH v5 1/1] socfpga: Adding configuration for development kit
Date: Tue, 6 Aug 2013 09:08:35 -0500	[thread overview]
Message-ID: <1375798115-15124-1-git-send-email-clsee@altera.com> (raw)

Separating the configuration file for Virtual
Target and real hardware Cyclone V development kit

Signed-off-by: Chin Liang See <clsee@altera.com>
Reviewed-by: Pavel Machek
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
---
Changes for v2:
   - Fixed the word wrap issue within patch
Changes for v3:
   - Fixed the long subject of the patch
Changes for v4:
   - Added change log for each revision change
Changes for v5:
   - Added Reviewed-by: Pavel Machek
   - Cc: Tom Rini
---
 include/configs/socfpga_cyclone5.h |   28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/include/configs/socfpga_cyclone5.h b/include/configs/socfpga_cyclone5.h
index b5a7a9a..06aeba6 100644
--- a/include/configs/socfpga_cyclone5.h
+++ b/include/configs/socfpga_cyclone5.h
@@ -11,6 +11,8 @@
 /*
  * High level configuration
  */
+/* Virtual target or real hardware */
+#define CONFIG_SOCFPGA_VIRTUAL_TARGET
 
 #define CONFIG_ARMV7
 #define CONFIG_L2_OFF
@@ -21,11 +23,12 @@
 #define CONFIG_SINGLE_BOOTLOADER
 #define CONFIG_SOCFPGA
 
+/* base address for .text section */
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 #define CONFIG_SYS_TEXT_BASE		0x08000040
-#define V_NS16550_CLK			1000000
-#define CONFIG_BAUDRATE			57600
-#define CONFIG_SYS_HZ			1000
-#define CONFIG_TIMER_CLOCK_KHZ		2400
+#else
+#define CONFIG_SYS_TEXT_BASE		0x01000040
+#endif
 #define CONFIG_SYS_LOAD_ADDR		0x7fc0
 
 /* Console I/O Buffer Size */
@@ -154,7 +157,7 @@
 /* SDRAM Bank #1 */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 /* SDRAM memory size */
-#define PHYS_SDRAM_1_SIZE		0x80000000
+#define PHYS_SDRAM_1_SIZE		0x40000000
 
 #define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_START	0x00000000
@@ -170,8 +173,13 @@
 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
 #define CONFIG_CONS_INDEX               1
 #define CONFIG_SYS_NS16550_COM1		UART0_BASE
-
 #define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define V_NS16550_CLK			1000000
+#else
+#define V_NS16550_CLK			100000000
+#endif
+#define CONFIG_BAUDRATE			115200
 
 /*
  * FLASH
@@ -184,9 +192,15 @@
 /* This timer use eosc1 where the clock frequency is fixed
  * throughout any condition */
 #define CONFIG_SYS_TIMERBASE		SOCFPGA_OSC1TIMER0_ADDRESS
-
 /* reload value when timer count to zero */
 #define TIMER_LOAD_VAL			0xFFFFFFFF
+/* Timer info */
+#define CONFIG_SYS_HZ			1000
+#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
+#define CONFIG_TIMER_CLOCK_KHZ		2400
+#else
+#define CONFIG_TIMER_CLOCK_KHZ		25000
+#endif
 
 #define CONFIG_ENV_IS_NOWHERE
 
-- 
1.7.9.5

             reply	other threads:[~2013-08-06 14:08 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-06 14:08 Chin Liang See [this message]
2013-08-06 16:00 ` [U-Boot] [RESEND PATCH v5 1/1] socfpga: Adding configuration for development kit Dinh Nguyen
2013-08-07 15:03   ` Chin Liang See

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1375798115-15124-1-git-send-email-clsee@altera.com \
    --to=clsee@altera.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.