From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/12] dma: mmp_pdma: add protect when alloc/free phy channels
Date: Wed, 7 Aug 2013 12:19:19 +0200 [thread overview]
Message-ID: <1375870770-14263-2-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1375870770-14263-1-git-send-email-zonque@gmail.com>
From: Xiang Wang <wangx@marvell.com>
In mmp pdma, phy channels are allocated/freed dynamically
and frequently. But no proper protection is added.
Conflict will happen when multi-users are requesting phy
channels at the same time. Use spinlock to protect.
Signed-off-by: Xiang Wang <wangx@marvell.com>
---
drivers/dma/mmp_pdma.c | 42 ++++++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 16 deletions(-)
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index c26699f..226158d 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -121,6 +121,7 @@ struct mmp_pdma_device {
struct device *dev;
struct dma_device device;
struct mmp_pdma_phy *phy;
+ spinlock_t phy_lock; /* protect alloc/free phy channels */
};
#define tx_to_mmp_pdma_desc(tx) container_of(tx, struct mmp_pdma_desc_sw, async_tx)
@@ -219,6 +220,7 @@ static struct mmp_pdma_phy *lookup_phy(struct mmp_pdma_chan *pchan)
int prio, i;
struct mmp_pdma_device *pdev = to_mmp_pdma_dev(pchan->chan.device);
struct mmp_pdma_phy *phy;
+ unsigned long flags;
/*
* dma channel priorities
@@ -227,6 +229,8 @@ static struct mmp_pdma_phy *lookup_phy(struct mmp_pdma_chan *pchan)
* ch 8 - 11, 24 - 27 <--> (2)
* ch 12 - 15, 28 - 31 <--> (3)
*/
+
+ spin_lock_irqsave(&pdev->phy_lock, flags);
for (prio = 0; prio <= (((pdev->dma_channels - 1) & 0xf) >> 2); prio++) {
for (i = 0; i < pdev->dma_channels; i++) {
if (prio != ((i & 0xf) >> 2))
@@ -234,14 +238,30 @@ static struct mmp_pdma_phy *lookup_phy(struct mmp_pdma_chan *pchan)
phy = &pdev->phy[i];
if (!phy->vchan) {
phy->vchan = pchan;
+ spin_unlock_irqrestore(&pdev->phy_lock, flags);
return phy;
}
}
}
+ spin_unlock_irqrestore(&pdev->phy_lock, flags);
return NULL;
}
+static void mmp_pdma_free_phy(struct mmp_pdma_chan *pchan)
+{
+ struct mmp_pdma_device *pdev = to_mmp_pdma_dev(pchan->chan.device);
+ unsigned long flags;
+
+ if (!pchan->phy)
+ return;
+
+ spin_lock_irqsave(&pdev->phy_lock, flags);
+ pchan->phy->vchan = NULL;
+ pchan->phy = NULL;
+ spin_unlock_irqrestore(&pdev->phy_lock, flags);
+}
+
/* desc->tx_list ==> pending list */
static void append_pending_queue(struct mmp_pdma_chan *chan,
struct mmp_pdma_desc_sw *desc)
@@ -277,10 +297,7 @@ static void start_pending_queue(struct mmp_pdma_chan *chan)
if (list_empty(&chan->chain_pending)) {
/* chance to re-fetch phy channel with higher prio */
- if (chan->phy) {
- chan->phy->vchan = NULL;
- chan->phy = NULL;
- }
+ mmp_pdma_free_phy(chan);
dev_dbg(chan->dev, "no pending list\n");
return;
}
@@ -377,10 +394,7 @@ static int mmp_pdma_alloc_chan_resources(struct dma_chan *dchan)
dev_err(chan->dev, "unable to allocate descriptor pool\n");
return -ENOMEM;
}
- if (chan->phy) {
- chan->phy->vchan = NULL;
- chan->phy = NULL;
- }
+ mmp_pdma_free_phy(chan);
chan->idle = true;
chan->dev_addr = 0;
return 1;
@@ -411,10 +425,7 @@ static void mmp_pdma_free_chan_resources(struct dma_chan *dchan)
chan->desc_pool = NULL;
chan->idle = true;
chan->dev_addr = 0;
- if (chan->phy) {
- chan->phy->vchan = NULL;
- chan->phy = NULL;
- }
+ mmp_pdma_free_phy(chan);
return;
}
@@ -581,10 +592,7 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
switch (cmd) {
case DMA_TERMINATE_ALL:
disable_chan(chan->phy);
- if (chan->phy) {
- chan->phy->vchan = NULL;
- chan->phy = NULL;
- }
+ mmp_pdma_free_phy(chan);
spin_lock_irqsave(&chan->desc_lock, flags);
mmp_pdma_free_desc_list(chan, &chan->chain_pending);
mmp_pdma_free_desc_list(chan, &chan->chain_running);
@@ -777,6 +785,8 @@ static int mmp_pdma_probe(struct platform_device *op)
return -ENOMEM;
pdev->dev = &op->dev;
+ spin_lock_init(&pdev->phy_lock);
+
iores = platform_get_resource(op, IORESOURCE_MEM, 0);
if (!iores)
return -EINVAL;
--
1.8.3.1
next prev parent reply other threads:[~2013-08-07 10:19 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-07 10:19 [PATCH 00/12] dma: pdma: some patches needed for PXA DT environments Daniel Mack
2013-08-07 10:19 ` Daniel Mack [this message]
2013-08-07 12:40 ` [PATCH 01/12] dma: mmp_pdma: add protect when alloc/free phy channels Ezequiel Garcia
2013-08-07 12:42 ` Daniel Mack
2013-08-08 8:35 ` Daniel Mack
2013-08-07 10:19 ` [PATCH 02/12] dma: mmp_pdma: clear DRCMR when free a phy channel Daniel Mack
2013-08-07 10:19 ` [PATCH 03/12] dma: mmp_pdma: factor out DRCMR register calculation Daniel Mack
2013-08-07 10:19 ` [PATCH 04/12] dma: mmp_pdma: fix maximum transfer length Daniel Mack
2013-08-07 10:19 ` [PATCH 05/12] dma: mmp_pdma: add filter function Daniel Mack
2013-08-07 10:19 ` [PATCH 06/12] dma: mmp_pdma: make the controller a DMA provider Daniel Mack
2013-08-07 16:12 ` Arnd Bergmann
2013-08-07 16:17 ` Daniel Mack
2013-08-07 20:17 ` Arnd Bergmann
2013-08-08 8:38 ` Daniel Mack
2013-08-09 13:10 ` Daniel Mack
2013-08-09 14:32 ` zhangfei gao
2013-08-09 21:08 ` Arnd Bergmann
2013-08-07 10:19 ` [PATCH 07/12] dma: mmp_pdma: print the number of channels at probe time Daniel Mack
2013-08-07 10:19 ` [PATCH 08/12] dma: mmp_pdma: remove duplicate assignment Daniel Mack
2013-08-07 10:19 ` [PATCH 09/12] dma: mmp_pdma: add support for byte-aligned transfers Daniel Mack
2013-08-08 9:04 ` Xiang Wang
2013-08-08 9:11 ` Daniel Mack
2013-08-16 8:05 ` Xiang Wang
2013-08-07 10:19 ` [PATCH 10/12] dma: mmp_pdma: implement DMA_PAUSE and DMA_RESUME Daniel Mack
2013-08-07 10:19 ` [PATCH 11/12] dma: mmp_pdma: add support for residue reporting Daniel Mack
2013-08-07 10:19 ` [PATCH 12/12] dma: mmp_pdma: add support for cyclic DMA descriptors Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375870770-14263-2-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.