From: "Arend van Spriel" <arend@broadcom.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
"Arend van Spriel" <arend@broadcom.com>
Subject: [PATCH 12/12] brcmsmac: add support for BCM4313 iPA variant
Date: Tue, 20 Aug 2013 16:00:46 +0200 [thread overview]
Message-ID: <1377007246-9957-13-git-send-email-arend@broadcom.com> (raw)
In-Reply-To: <1377007246-9957-1-git-send-email-arend@broadcom.com>
This patch completes the changes needed for supporting the
iPA variant cards of the BCM4313 wireless chipset.
Tested-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
---
.../net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c | 71 ++++++++++++++------
1 file changed, 51 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
index 8fb1048..54f96f8 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_lcn.c
@@ -1826,6 +1826,17 @@ wlc_lcnphy_radio_2064_channel_tune_4313(struct brcms_phy *pi, u8 channel)
write_radio_reg(pi, RADIO_2064_REG038, 3);
write_radio_reg(pi, RADIO_2064_REG091, 7);
}
+
+ if (!(pi->sh->boardflags & BFL_FEM)) {
+ u8 reg038[14] = {0xd, 0xe, 0xd, 0xd, 0xd, 0xc,
+ 0xa, 0xb, 0xb, 0x3, 0x3, 0x2, 0x0, 0x0};
+
+ write_radio_reg(pi, RADIO_2064_REG02A, 0xf);
+ write_radio_reg(pi, RADIO_2064_REG091, 0x3);
+ write_radio_reg(pi, RADIO_2064_REG038, 0x3);
+
+ write_radio_reg(pi, RADIO_2064_REG038, reg038[channel - 1]);
+ }
}
static int
@@ -2123,7 +2134,16 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
{
struct phytbl_info tab;
u32 rfseq, ind;
+ enum lcnphy_tssi_mode mode;
+ u8 tssi_sel;
+ if (pi->sh->boardflags & BFL_FEM) {
+ tssi_sel = 0x1;
+ mode = LCNPHY_TSSI_EXT;
+ } else {
+ tssi_sel = 0xe;
+ mode = LCNPHY_TSSI_POST_PA;
+ }
tab.tbl_id = LCNPHY_TBL_ID_TXPWRCTL;
tab.tbl_width = 32;
tab.tbl_ptr = &ind;
@@ -2144,7 +2164,7 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
mod_phy_reg(pi, 0x503, (0x1 << 4), (1) << 4);
- wlc_lcnphy_set_tssi_mux(pi, LCNPHY_TSSI_EXT);
+ wlc_lcnphy_set_tssi_mux(pi, mode);
mod_phy_reg(pi, 0x4a4, (0x1 << 14), (0) << 14);
mod_phy_reg(pi, 0x4a4, (0x1 << 15), (1) << 15);
@@ -2180,9 +2200,10 @@ static void wlc_lcnphy_tssi_setup(struct brcms_phy *pi)
mod_phy_reg(pi, 0x49a, (0x1ff << 0), (0xff) << 0);
if (LCNREV_IS(pi->pubpi.phy_rev, 2)) {
- mod_radio_reg(pi, RADIO_2064_REG028, 0xf, 0xe);
+ mod_radio_reg(pi, RADIO_2064_REG028, 0xf, tssi_sel);
mod_radio_reg(pi, RADIO_2064_REG086, 0x4, 0x4);
} else {
+ mod_radio_reg(pi, RADIO_2064_REG028, 0x1e, tssi_sel << 1);
mod_radio_reg(pi, RADIO_2064_REG03A, 0x1, 1);
mod_radio_reg(pi, RADIO_2064_REG11A, 0x8, 1 << 3);
}
@@ -4358,8 +4379,11 @@ wlc_lcnphy_load_tx_gain_table(struct brcms_phy *pi,
tab.tbl_len = 1;
tab.tbl_ptr = &val;
+ /* fixed gm_gain value for iPA */
+ gm_gain = 15;
for (j = 0; j < 128; j++) {
- gm_gain = gain_table[j].gm;
+ if (pi->sh->boardflags & BFL_FEM)
+ gm_gain = gain_table[j].gm;
val = (((u32) pa_gain << 24) |
(gain_table[j].pad << 16) |
(gain_table[j].pga << 8) | gm_gain);
@@ -4570,7 +4594,10 @@ static void wlc_radio_2064_init(struct brcms_phy *pi)
write_phy_reg(pi, 0x4ea, 0x4688);
- mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
+ if (pi->sh->boardflags & BFL_FEM)
+ mod_phy_reg(pi, 0x4eb, (0x7 << 0), 2 << 0);
+ else
+ mod_phy_reg(pi, 0x4eb, (0x7 << 0), 3 << 0);
mod_phy_reg(pi, 0x4eb, (0x7 << 6), 0 << 6);
@@ -4581,6 +4608,13 @@ static void wlc_radio_2064_init(struct brcms_phy *pi)
wlc_lcnphy_rcal(pi);
wlc_lcnphy_rc_cal(pi);
+
+ if (!(pi->sh->boardflags & BFL_FEM)) {
+ write_radio_reg(pi, RADIO_2064_REG032, 0x6f);
+ write_radio_reg(pi, RADIO_2064_REG033, 0x19);
+ write_radio_reg(pi, RADIO_2064_REG039, 0xe);
+ }
+
}
static void wlc_lcnphy_radio_init(struct brcms_phy *pi)
@@ -4611,22 +4645,20 @@ static void wlc_lcnphy_tbl_init(struct brcms_phy *pi)
wlc_lcnphy_write_table(pi, &tab);
}
- tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
- tab.tbl_width = 16;
- tab.tbl_ptr = &val;
- tab.tbl_len = 1;
-
- val = 114;
- tab.tbl_offset = 0;
- wlc_lcnphy_write_table(pi, &tab);
+ if (!(pi->sh->boardflags & BFL_FEM)) {
+ tab.tbl_id = LCNPHY_TBL_ID_RFSEQ;
+ tab.tbl_width = 16;
+ tab.tbl_ptr = &val;
+ tab.tbl_len = 1;
- val = 130;
- tab.tbl_offset = 1;
- wlc_lcnphy_write_table(pi, &tab);
+ val = 150;
+ tab.tbl_offset = 0;
+ wlc_lcnphy_write_table(pi, &tab);
- val = 6;
- tab.tbl_offset = 8;
- wlc_lcnphy_write_table(pi, &tab);
+ val = 220;
+ tab.tbl_offset = 1;
+ wlc_lcnphy_write_table(pi, &tab);
+ }
if (CHSPEC_IS2G(pi->radio_chanspec)) {
if (pi->sh->boardflags & BFL_FEM)
@@ -5059,8 +5091,7 @@ bool wlc_phy_attach_lcnphy(struct brcms_phy *pi)
if (!wlc_phy_txpwr_srom_read_lcnphy(pi))
return false;
- if ((pi->sh->boardflags & BFL_FEM) &&
- (LCNREV_IS(pi->pubpi.phy_rev, 1))) {
+ if (LCNREV_IS(pi->pubpi.phy_rev, 1)) {
if (pi_lcn->lcnphy_tempsense_option == 3) {
pi->hwpwrctrl = true;
pi->hwpwrctrl_capable = true;
--
1.7.10.4
next prev parent reply other threads:[~2013-08-20 14:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-20 14:00 [PATCH 00/12] brcmsmac: bcm4313 iPA support Arend van Spriel
2013-08-20 14:00 ` [PATCH 01/12] brcmsmac: cosmetic change in phy_lcn.c Arend van Spriel
2013-08-20 14:00 ` [PATCH 02/12] brcmsmac: change pa_gain for bcm4313 iPA Arend van Spriel
2013-08-20 14:00 ` [PATCH 03/12] brcmsmac: use ARRAY_SIZE in phytbl_lcn.c Arend van Spriel
2013-08-20 14:00 ` [PATCH 04/12] brcmsmac: add debug info message providing phy and radio info Arend van Spriel
2013-08-20 14:00 ` [PATCH 05/12] brcmsmac: update transmit gain table for lcn phy Arend van Spriel
2013-08-20 14:00 ` [PATCH 06/12] brcmsmac: change lcnphy receive i/q calibration routine Arend van Spriel
2013-08-20 14:00 ` [PATCH 07/12] brcmsmac: fix TSSI idle estimation Arend van Spriel
2013-08-20 14:00 ` [PATCH 08/12] brcmsmac: avoid calling set_txpwr_by_index() twice Arend van Spriel
2013-08-20 14:00 ` [PATCH 09/12] brcmsmac: rework switch control table init including iPA BT-combo Arend van Spriel
2013-08-20 14:00 ` [PATCH 10/12] brcmsmac: correct phy registers for TSSI-based power control Arend van Spriel
2013-08-20 14:00 ` [PATCH 11/12] brcmsmac: reinitialize TSSI power control upon channel switch Arend van Spriel
2013-08-20 14:00 ` Arend van Spriel [this message]
2013-08-20 18:30 ` [PATCH 12/12] brcmsmac: add support for BCM4313 iPA variant Joe Perches
2013-08-21 9:28 ` Arend van Spriel
2013-08-21 9:45 ` [PATCH V2 " Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377007246-9957-13-git-send-email-arend@broadcom.com \
--to=arend@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.