From: Rob Herring <robherring2@gmail.com>
To: netdev@vger.kernel.org
Cc: Lennert Buytenhek <buytenh@wantstofly.org>,
bhutchings@solarflare.com, Rob Herring <rob.herring@calxeda.com>
Subject: [PATCH v2 03/11] net: calxedaxgmac: fix race between xgmac_tx_complete and xgmac_tx_err
Date: Thu, 29 Aug 2013 22:13:40 -0500 [thread overview]
Message-ID: <1377832428-18117-3-git-send-email-robherring2@gmail.com> (raw)
In-Reply-To: <1377832428-18117-1-git-send-email-robherring2@gmail.com>
From: Rob Herring <rob.herring@calxeda.com>
It is possible for the xgmac_tx_complete to run concurrently with
xgmac_tx_err since there are no locks. Fix this by moving the tx
error handling to a workqueue so we can disable napi while we reset
the transmitter.
Reported-by: Andreas Herrmann <andreas.herrmann@calxeda.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
---
v2: No change
drivers/net/ethernet/calxeda/xgmac.c | 38 +++++++++++++++++-------------------
1 file changed, 18 insertions(+), 20 deletions(-)
diff --git a/drivers/net/ethernet/calxeda/xgmac.c b/drivers/net/ethernet/calxeda/xgmac.c
index d41af68..df7e3e2 100644
--- a/drivers/net/ethernet/calxeda/xgmac.c
+++ b/drivers/net/ethernet/calxeda/xgmac.c
@@ -393,6 +393,7 @@ struct xgmac_priv {
char rx_pause;
char tx_pause;
int wolopts;
+ struct work_struct tx_timeout_work;
};
/* XGMAC Configuration Settings */
@@ -897,21 +898,18 @@ static void xgmac_tx_complete(struct xgmac_priv *priv)
netif_wake_queue(priv->dev);
}
-/**
- * xgmac_tx_err:
- * @priv: pointer to the private device structure
- * Description: it cleans the descriptors and restarts the transmission
- * in case of errors.
- */
-static void xgmac_tx_err(struct xgmac_priv *priv)
+static void xgmac_tx_timeout_work(struct work_struct *work)
{
- u32 reg, value, inten;
+ u32 reg, value;
+ struct xgmac_priv *priv =
+ container_of(work, struct xgmac_priv, tx_timeout_work);
- netif_stop_queue(priv->dev);
+ napi_disable(&priv->napi);
- inten = readl(priv->base + XGMAC_DMA_INTR_ENA);
writel(0, priv->base + XGMAC_DMA_INTR_ENA);
+ netif_tx_lock(priv->dev);
+
reg = readl(priv->base + XGMAC_DMA_CONTROL);
writel(reg & ~DMA_CONTROL_ST, priv->base + XGMAC_DMA_CONTROL);
do {
@@ -927,9 +925,15 @@ static void xgmac_tx_err(struct xgmac_priv *priv)
writel(DMA_STATUS_TU | DMA_STATUS_TPS | DMA_STATUS_NIS | DMA_STATUS_AIS,
priv->base + XGMAC_DMA_STATUS);
- writel(inten, priv->base + XGMAC_DMA_INTR_ENA);
+ netif_tx_unlock(priv->dev);
netif_wake_queue(priv->dev);
+
+ napi_enable(&priv->napi);
+
+ /* Enable interrupts */
+ writel(DMA_INTR_DEFAULT_MASK, priv->base + XGMAC_DMA_STATUS);
+ writel(DMA_INTR_DEFAULT_MASK, priv->base + XGMAC_DMA_INTR_ENA);
}
static int xgmac_hw_init(struct net_device *dev)
@@ -1225,9 +1229,7 @@ static int xgmac_poll(struct napi_struct *napi, int budget)
static void xgmac_tx_timeout(struct net_device *dev)
{
struct xgmac_priv *priv = netdev_priv(dev);
-
- /* Clear Tx resources and restart transmitting again */
- xgmac_tx_err(priv);
+ schedule_work(&priv->tx_timeout_work);
}
/**
@@ -1366,7 +1368,6 @@ static irqreturn_t xgmac_pmt_interrupt(int irq, void *dev_id)
static irqreturn_t xgmac_interrupt(int irq, void *dev_id)
{
u32 intr_status;
- bool tx_err = false;
struct net_device *dev = (struct net_device *)dev_id;
struct xgmac_priv *priv = netdev_priv(dev);
struct xgmac_extra_stats *x = &priv->xstats;
@@ -1396,16 +1397,12 @@ static irqreturn_t xgmac_interrupt(int irq, void *dev_id)
if (intr_status & DMA_STATUS_TPS) {
netdev_err(priv->dev, "transmit process stopped\n");
x->tx_process_stopped++;
- tx_err = true;
+ schedule_work(&priv->tx_timeout_work);
}
if (intr_status & DMA_STATUS_FBI) {
netdev_err(priv->dev, "fatal bus error\n");
x->fatal_bus_error++;
- tx_err = true;
}
-
- if (tx_err)
- xgmac_tx_err(priv);
}
/* TX/RX NORMAL interrupts */
@@ -1708,6 +1705,7 @@ static int xgmac_probe(struct platform_device *pdev)
ndev->netdev_ops = &xgmac_netdev_ops;
SET_ETHTOOL_OPS(ndev, &xgmac_ethtool_ops);
spin_lock_init(&priv->stats_lock);
+ INIT_WORK(&priv->tx_timeout_work, xgmac_tx_timeout_work);
priv->device = &pdev->dev;
priv->dev = ndev;
--
1.8.1.2
next prev parent reply other threads:[~2013-08-30 3:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-30 3:13 [PATCH v2 01/11] net: calxedaxgmac: remove NETIF_F_FRAGLIST setting Rob Herring
2013-08-30 3:13 ` [PATCH v2 02/11] net: calxedaxgmac: read correct field in xgmac_desc_get_buf_len Rob Herring
2013-08-30 3:13 ` Rob Herring [this message]
2013-08-30 3:13 ` [PATCH v2 04/11] net: calxedaxgmac: fix possible skb free before tx complete Rob Herring
2013-08-30 3:13 ` [PATCH v2 05/11] net: calxedaxgmac: update ring buffer tx_head after barriers Rob Herring
2013-08-30 3:13 ` [PATCH v2 06/11] net: calxedaxgmac: fix race with tx queue stop/wake Rob Herring
2013-08-30 17:12 ` Ben Hutchings
2013-08-30 21:35 ` [PATCH v3 " Rob Herring
2013-08-30 21:41 ` David Miller
2013-08-30 3:13 ` [PATCH v2 07/11] net: calxedaxgmac: enable interrupts after napi_enable Rob Herring
2013-08-30 3:13 ` [PATCH v2 08/11] net: calxedaxgmac: fix various errors in xgmac_set_rx_mode Rob Herring
2013-08-30 3:13 ` [PATCH v2 09/11] net: calxedaxgmac: remove some unused statistic counters Rob Herring
2013-08-30 3:13 ` [PATCH v2 10/11] net: calxedaxgmac: fix rx DMA mapping API size mismatches Rob Herring
2013-08-30 3:13 ` [PATCH v2 11/11] net: calxedaxgmac: fix xgmac_xmit DMA mapping error handling Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377832428-18117-3-git-send-email-robherring2@gmail.com \
--to=robherring2@gmail.com \
--cc=bhutchings@solarflare.com \
--cc=buytenh@wantstofly.org \
--cc=netdev@vger.kernel.org \
--cc=rob.herring@calxeda.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.