From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Sun, 15 Sep 2013 23:11:49 -0300 Subject: [U-Boot] [PATCH v2] doc: README.mxs: Add instruction to install 'libssl-dev' Message-ID: <1379297509-8641-1-git-send-email-festevam@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Fabio Estevam Since commit bce883707 (ARM: mxs: tools: Add mkimage support for MXS bootstream) the following build error is seen when doing a MAKEALL build: $ ./MAKEALL mx28evk Configuring for mx28evk - Board: mx28evk, Options: ENV_IS_IN_MMC mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory Add an entry about the need of installing the 'libssl-dev' package. Signed-off-by: Fabio Estevam --- Changes since v1: - Do not remove the 'elftosb' text. doc/README.mxs | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/doc/README.mxs b/doc/README.mxs index 5d9e72f..1e5bc5c 100644 --- a/doc/README.mxs +++ b/doc/README.mxs @@ -63,6 +63,11 @@ copy the binary by hand: Make sure the "elftosb" binary can be found in your $PATH, in this case this means "/usr/local/bin/" has to be in your $PATH. +Install the 'libssl-dev' package as well. On a Ubuntu-based distribution, this +package can be installed as follows: + + $ sudo apt-get install libssl-dev + 2) Compiling U-Boot for a MXS based board ------------------------------------------- -- 1.8.1.2