From: Thierry Reding <thierry.reding@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Tony Lindgren <tony@atomide.com>,
Eric Miao <eric.y.miao@gmail.com>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Ben Dooks <ben-linux@fluff.org>,
Kukjin Kim <kgene.kim@samsung.com>,
Simon Horman <horms@verge.net.au>,
Magnus Damm <magnus.damm@gmail.com>,
Guan Xuetao <gxt@mprc.pku.edu.cn>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-omap@vger.kernel.org, openezx-devel@lists.openezx.org,
linux-samsung-soc@vger.kernel.org, linux-sh@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
Date: Mon, 23 Sep 2013 23:40:57 +0200 [thread overview]
Message-ID: <1379972467-11243-1-git-send-email-treding@nvidia.com> (raw)
This series adds the ability to specify a GPIO and a power supply to
enable a backlight.
Patch 1 refactors the power on and power off sequences into separate
functions in preparation for subsequent patches.
Patch 2 adds an optional GPIO to enable a backlight. This patch only
includes the field within the platform data so that it can be properly
setup before actually being put to use.
Patches 3 to 7 convert all users of the pwm-backlight driver to use the
new field. For most of them, this just initializes the field to -1,
marking the field as unused.
Patch 8 uses the new field within the pwm-backlight driver and at the
same time allows it to be parsed from device tree.
Patch 9 implements support for an optional power supply. This relies on
the regulator core to return a dummy regulator when no supply has been
otherwise setup so the driver doesn't have to handle that specially nor
require all users to be updated.
Patch 10 adds a way to keep a backlight turned off at boot. This is
useful when hooking up a backlight with a subsystem such as DRM which
has more explicit semantics as to when a backlight should be turned on.
Due to the dependencies within the series, I propose to take all these
patches through the PWM tree, so I'll need acks from OMAP, PXA, Samsung,
shmobile and Unicore32 maintainers.
Thierry
Thierry Reding (10):
pwm-backlight: Refactor backlight power on/off
pwm-backlight: Add optional enable GPIO
ARM: OMAP: Initialize PWM backlight enable_gpio field
ARM: pxa: Initialize PWM backlight enable_gpio field
ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
ARM: shmobile: Initialize PWM backlight enable_gpio field
unicore32: Initialize PWM backlight enable_gpio field
pwm-backlight: Use new enable_gpio field
pwm-backlight: Use an optional power supply
pwm-backlight: Allow backlight to remain disabled on boot
.../bindings/video/backlight/pwm-backlight.txt | 6 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 1 +
arch/arm/mach-pxa/cm-x300.c | 1 +
arch/arm/mach-pxa/colibri-pxa270-income.c | 1 +
arch/arm/mach-pxa/ezx.c | 1 +
arch/arm/mach-pxa/hx4700.c | 1 +
arch/arm/mach-pxa/lpd270.c | 1 +
arch/arm/mach-pxa/magician.c | 1 +
arch/arm/mach-pxa/mainstone.c | 1 +
arch/arm/mach-pxa/mioa701.c | 1 +
arch/arm/mach-pxa/palm27x.c | 1 +
arch/arm/mach-pxa/palmtc.c | 35 +----
arch/arm/mach-pxa/palmte2.c | 1 +
arch/arm/mach-pxa/pcm990-baseboard.c | 1 +
arch/arm/mach-pxa/raumfeld.c | 1 +
arch/arm/mach-pxa/tavorevb.c | 2 +
arch/arm/mach-pxa/viper.c | 1 +
arch/arm/mach-pxa/z2.c | 2 +
arch/arm/mach-pxa/zylonite.c | 1 +
arch/arm/mach-s3c24xx/mach-h1940.c | 1 +
arch/arm/mach-s3c24xx/mach-rx1950.c | 1 +
arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
arch/arm/mach-s3c64xx/mach-hmt.c | 1 +
arch/arm/mach-s3c64xx/mach-smartq.c | 1 +
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6440.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6450.c | 1 +
arch/arm/mach-s5pc100/mach-smdkc100.c | 1 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 1 +
arch/arm/mach-shmobile/board-armadillo800eva.c | 1 +
arch/arm/plat-samsung/dev-backlight.c | 5 +
arch/unicore32/kernel/puv3-nb0916.c | 1 +
drivers/video/backlight/pwm_bl.c | 142 ++++++++++++++++-----
include/linux/pwm_backlight.h | 7 +
34 files changed, 162 insertions(+), 64 deletions(-)
--
1.8.4
WARNING: multiple messages have this Message-ID (diff)
From: Thierry Reding <thierry.reding@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
Date: Mon, 23 Sep 2013 21:40:57 +0000 [thread overview]
Message-ID: <1379972467-11243-1-git-send-email-treding@nvidia.com> (raw)
This series adds the ability to specify a GPIO and a power supply to
enable a backlight.
Patch 1 refactors the power on and power off sequences into separate
functions in preparation for subsequent patches.
Patch 2 adds an optional GPIO to enable a backlight. This patch only
includes the field within the platform data so that it can be properly
setup before actually being put to use.
Patches 3 to 7 convert all users of the pwm-backlight driver to use the
new field. For most of them, this just initializes the field to -1,
marking the field as unused.
Patch 8 uses the new field within the pwm-backlight driver and at the
same time allows it to be parsed from device tree.
Patch 9 implements support for an optional power supply. This relies on
the regulator core to return a dummy regulator when no supply has been
otherwise setup so the driver doesn't have to handle that specially nor
require all users to be updated.
Patch 10 adds a way to keep a backlight turned off at boot. This is
useful when hooking up a backlight with a subsystem such as DRM which
has more explicit semantics as to when a backlight should be turned on.
Due to the dependencies within the series, I propose to take all these
patches through the PWM tree, so I'll need acks from OMAP, PXA, Samsung,
shmobile and Unicore32 maintainers.
Thierry
Thierry Reding (10):
pwm-backlight: Refactor backlight power on/off
pwm-backlight: Add optional enable GPIO
ARM: OMAP: Initialize PWM backlight enable_gpio field
ARM: pxa: Initialize PWM backlight enable_gpio field
ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
ARM: shmobile: Initialize PWM backlight enable_gpio field
unicore32: Initialize PWM backlight enable_gpio field
pwm-backlight: Use new enable_gpio field
pwm-backlight: Use an optional power supply
pwm-backlight: Allow backlight to remain disabled on boot
.../bindings/video/backlight/pwm-backlight.txt | 6 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 1 +
arch/arm/mach-pxa/cm-x300.c | 1 +
arch/arm/mach-pxa/colibri-pxa270-income.c | 1 +
arch/arm/mach-pxa/ezx.c | 1 +
arch/arm/mach-pxa/hx4700.c | 1 +
arch/arm/mach-pxa/lpd270.c | 1 +
arch/arm/mach-pxa/magician.c | 1 +
arch/arm/mach-pxa/mainstone.c | 1 +
arch/arm/mach-pxa/mioa701.c | 1 +
arch/arm/mach-pxa/palm27x.c | 1 +
arch/arm/mach-pxa/palmtc.c | 35 +----
arch/arm/mach-pxa/palmte2.c | 1 +
arch/arm/mach-pxa/pcm990-baseboard.c | 1 +
arch/arm/mach-pxa/raumfeld.c | 1 +
arch/arm/mach-pxa/tavorevb.c | 2 +
arch/arm/mach-pxa/viper.c | 1 +
arch/arm/mach-pxa/z2.c | 2 +
arch/arm/mach-pxa/zylonite.c | 1 +
arch/arm/mach-s3c24xx/mach-h1940.c | 1 +
arch/arm/mach-s3c24xx/mach-rx1950.c | 1 +
arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
arch/arm/mach-s3c64xx/mach-hmt.c | 1 +
arch/arm/mach-s3c64xx/mach-smartq.c | 1 +
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6440.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6450.c | 1 +
arch/arm/mach-s5pc100/mach-smdkc100.c | 1 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 1 +
arch/arm/mach-shmobile/board-armadillo800eva.c | 1 +
arch/arm/plat-samsung/dev-backlight.c | 5 +
arch/unicore32/kernel/puv3-nb0916.c | 1 +
drivers/video/backlight/pwm_bl.c | 142 ++++++++++++++++-----
include/linux/pwm_backlight.h | 7 +
34 files changed, 162 insertions(+), 64 deletions(-)
--
1.8.4
WARNING: multiple messages have this Message-ID (diff)
From: thierry.reding@gmail.com (Thierry Reding)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/10] pwm-backlight: Add GPIO and power supply support
Date: Mon, 23 Sep 2013 23:40:57 +0200 [thread overview]
Message-ID: <1379972467-11243-1-git-send-email-treding@nvidia.com> (raw)
This series adds the ability to specify a GPIO and a power supply to
enable a backlight.
Patch 1 refactors the power on and power off sequences into separate
functions in preparation for subsequent patches.
Patch 2 adds an optional GPIO to enable a backlight. This patch only
includes the field within the platform data so that it can be properly
setup before actually being put to use.
Patches 3 to 7 convert all users of the pwm-backlight driver to use the
new field. For most of them, this just initializes the field to -1,
marking the field as unused.
Patch 8 uses the new field within the pwm-backlight driver and at the
same time allows it to be parsed from device tree.
Patch 9 implements support for an optional power supply. This relies on
the regulator core to return a dummy regulator when no supply has been
otherwise setup so the driver doesn't have to handle that specially nor
require all users to be updated.
Patch 10 adds a way to keep a backlight turned off at boot. This is
useful when hooking up a backlight with a subsystem such as DRM which
has more explicit semantics as to when a backlight should be turned on.
Due to the dependencies within the series, I propose to take all these
patches through the PWM tree, so I'll need acks from OMAP, PXA, Samsung,
shmobile and Unicore32 maintainers.
Thierry
Thierry Reding (10):
pwm-backlight: Refactor backlight power on/off
pwm-backlight: Add optional enable GPIO
ARM: OMAP: Initialize PWM backlight enable_gpio field
ARM: pxa: Initialize PWM backlight enable_gpio field
ARM: SAMSUNG: Initialize PWM backlight enable_gpio field
ARM: shmobile: Initialize PWM backlight enable_gpio field
unicore32: Initialize PWM backlight enable_gpio field
pwm-backlight: Use new enable_gpio field
pwm-backlight: Use an optional power supply
pwm-backlight: Allow backlight to remain disabled on boot
.../bindings/video/backlight/pwm-backlight.txt | 6 +
arch/arm/mach-omap2/board-zoom-peripherals.c | 1 +
arch/arm/mach-pxa/cm-x300.c | 1 +
arch/arm/mach-pxa/colibri-pxa270-income.c | 1 +
arch/arm/mach-pxa/ezx.c | 1 +
arch/arm/mach-pxa/hx4700.c | 1 +
arch/arm/mach-pxa/lpd270.c | 1 +
arch/arm/mach-pxa/magician.c | 1 +
arch/arm/mach-pxa/mainstone.c | 1 +
arch/arm/mach-pxa/mioa701.c | 1 +
arch/arm/mach-pxa/palm27x.c | 1 +
arch/arm/mach-pxa/palmtc.c | 35 +----
arch/arm/mach-pxa/palmte2.c | 1 +
arch/arm/mach-pxa/pcm990-baseboard.c | 1 +
arch/arm/mach-pxa/raumfeld.c | 1 +
arch/arm/mach-pxa/tavorevb.c | 2 +
arch/arm/mach-pxa/viper.c | 1 +
arch/arm/mach-pxa/z2.c | 2 +
arch/arm/mach-pxa/zylonite.c | 1 +
arch/arm/mach-s3c24xx/mach-h1940.c | 1 +
arch/arm/mach-s3c24xx/mach-rx1950.c | 1 +
arch/arm/mach-s3c64xx/mach-crag6410.c | 1 +
arch/arm/mach-s3c64xx/mach-hmt.c | 1 +
arch/arm/mach-s3c64xx/mach-smartq.c | 1 +
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6440.c | 1 +
arch/arm/mach-s5p64x0/mach-smdk6450.c | 1 +
arch/arm/mach-s5pc100/mach-smdkc100.c | 1 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 1 +
arch/arm/mach-shmobile/board-armadillo800eva.c | 1 +
arch/arm/plat-samsung/dev-backlight.c | 5 +
arch/unicore32/kernel/puv3-nb0916.c | 1 +
drivers/video/backlight/pwm_bl.c | 142 ++++++++++++++++-----
include/linux/pwm_backlight.h | 7 +
34 files changed, 162 insertions(+), 64 deletions(-)
--
1.8.4
next reply other threads:[~2013-09-23 21:40 UTC|newest]
Thread overview: 102+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-23 21:40 Thierry Reding [this message]
2013-09-23 21:40 ` [PATCH 00/10] pwm-backlight: Add GPIO and power supply support Thierry Reding
2013-09-23 21:40 ` Thierry Reding
2013-09-23 21:40 ` [PATCH 01/10] pwm-backlight: Refactor backlight power on/off Thierry Reding
2013-09-23 21:40 ` Thierry Reding
2013-09-23 21:40 ` Thierry Reding
2013-09-23 21:40 ` Thierry Reding
[not found] ` <1379972467-11243-2-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-01 18:26 ` Stephen Warren
2013-10-01 18:26 ` Stephen Warren
2013-10-01 18:26 ` Stephen Warren
2013-10-01 18:26 ` Stephen Warren
2013-10-01 20:34 ` Thierry Reding
2013-10-01 20:34 ` Thierry Reding
2013-10-01 20:34 ` Thierry Reding
2013-09-23 21:40 ` [PATCH 02/10] pwm-backlight: Add optional enable GPIO Thierry Reding
2013-09-23 21:40 ` Thierry Reding
2013-09-23 21:40 ` Thierry Reding
2013-09-23 21:41 ` [PATCH 03/10] ARM: OMAP: Initialize PWM backlight enable_gpio field Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` [PATCH 04/10] ARM: pxa: " Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` [PATCH 05/10] ARM: SAMSUNG: " Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-10-01 18:31 ` Stephen Warren
2013-10-01 18:31 ` Stephen Warren
2013-10-01 18:31 ` Stephen Warren
[not found] ` <524B14E8.5040302-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2013-10-01 20:43 ` Thierry Reding
2013-10-01 20:43 ` Thierry Reding
2013-10-01 20:43 ` Thierry Reding
2013-10-01 20:43 ` Thierry Reding
[not found] ` <20131001204335.GB9201-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2013-10-01 20:58 ` Stephen Warren
2013-10-01 20:58 ` Stephen Warren
2013-10-01 20:58 ` Stephen Warren
2013-10-01 20:58 ` Stephen Warren
2013-10-01 21:23 ` Thierry Reding
2013-10-01 21:23 ` Thierry Reding
2013-10-01 21:23 ` Thierry Reding
2013-09-23 21:41 ` [PATCH 06/10] ARM: shmobile: " Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-25 5:40 ` Simon Horman
2013-09-25 5:40 ` Simon Horman
2013-09-25 5:40 ` Simon Horman
2013-09-23 21:41 ` [PATCH 07/10] unicore32: " Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
[not found] ` <1379972467-11243-1-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-09-23 21:41 ` [PATCH 08/10] pwm-backlight: Use new " Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
[not found] ` <1379972467-11243-9-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2013-10-01 18:39 ` Stephen Warren
2013-10-01 18:39 ` Stephen Warren
2013-10-01 18:39 ` Stephen Warren
2013-10-01 18:39 ` Stephen Warren
2013-10-01 20:49 ` Thierry Reding
2013-10-01 20:49 ` Thierry Reding
2013-10-01 20:49 ` Thierry Reding
2013-09-23 21:41 ` [PATCH 09/10] pwm-backlight: Use an optional power supply Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-10-01 18:43 ` Stephen Warren
2013-10-01 18:43 ` Stephen Warren
2013-10-01 18:43 ` Stephen Warren
2013-10-01 20:53 ` Thierry Reding
2013-10-01 20:53 ` Thierry Reding
2013-10-01 20:53 ` Thierry Reding
2013-10-01 20:59 ` Stephen Warren
2013-10-01 20:59 ` Stephen Warren
2013-10-01 20:59 ` Stephen Warren
2013-10-01 21:31 ` Thierry Reding
2013-10-01 21:31 ` Thierry Reding
2013-10-01 21:31 ` Thierry Reding
2013-10-02 10:35 ` Mark Brown
2013-10-02 10:35 ` Mark Brown
2013-10-02 10:35 ` Mark Brown
2013-09-23 21:41 ` [PATCH 10/10] pwm-backlight: Allow backlight to remain disabled on boot Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-09-23 21:41 ` Thierry Reding
2013-10-01 18:50 ` Stephen Warren
2013-10-01 18:50 ` Stephen Warren
2013-10-01 18:50 ` Stephen Warren
2013-10-01 21:14 ` Thierry Reding
2013-10-01 21:14 ` Thierry Reding
2013-10-01 21:14 ` Thierry Reding
2013-10-02 17:45 ` Thierry Reding
2013-10-02 17:45 ` Thierry Reding
2013-10-02 17:45 ` Thierry Reding
2013-09-24 8:14 ` [PATCH 00/10] pwm-backlight: Add GPIO and power supply support Simon Horman
2013-09-24 8:14 ` Simon Horman
2013-09-24 8:14 ` Simon Horman
[not found] ` <20130924081446.GA11981-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2013-09-24 9:00 ` Thierry Reding
2013-09-24 9:00 ` Thierry Reding
2013-09-24 9:00 ` Thierry Reding
2013-09-24 9:00 ` Thierry Reding
2013-09-25 5:39 ` Simon Horman
2013-09-25 5:39 ` Simon Horman
2013-09-25 5:39 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379972467-11243-1-git-send-email-treding@nvidia.com \
--to=thierry.reding@gmail.com \
--cc=ben-linux@fluff.org \
--cc=devicetree@vger.kernel.org \
--cc=eric.y.miao@gmail.com \
--cc=gxt@mprc.pku.edu.cn \
--cc=haojian.zhuang@gmail.com \
--cc=horms@verge.net.au \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mark.rutland@arm.com \
--cc=openezx-devel@lists.openezx.org \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.