All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	Marek Lindner <mareklindner@neomailbox.ch>,
	Antonio Quartulli <antonio@meshcoding.com>
Subject: [B.A.T.M.A.N.] [PATCH] batman-adv: set up network coding packet handlers during module init
Date: Wed,  2 Oct 2013 22:03:21 +0200	[thread overview]
Message-ID: <1380744201-2074-2-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1380744201-2074-1-git-send-email-antonio@meshcoding.com>

From: Matthias Schiffer <mschiffer@universe-factory.net>

batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).

The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).

Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
---
 net/batman-adv/main.c           |  5 +++--
 net/batman-adv/network-coding.c | 28 ++++++++++++++++++----------
 net/batman-adv/network-coding.h | 14 ++++++++++----
 3 files changed, 31 insertions(+), 16 deletions(-)

diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index c72d1bc..1356af6 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -65,6 +65,7 @@ static int __init batadv_init(void)
 	batadv_recv_handler_init();
 
 	batadv_iv_init();
+	batadv_nc_init();
 
 	batadv_event_workqueue = create_singlethread_workqueue("bat_events");
 
@@ -142,7 +143,7 @@ int batadv_mesh_init(struct net_device *soft_iface)
 	if (ret < 0)
 		goto err;
 
-	ret = batadv_nc_init(bat_priv);
+	ret = batadv_nc_mesh_init(bat_priv);
 	if (ret < 0)
 		goto err;
 
@@ -167,7 +168,7 @@ void batadv_mesh_free(struct net_device *soft_iface)
 	batadv_vis_quit(bat_priv);
 
 	batadv_gw_node_purge(bat_priv);
-	batadv_nc_free(bat_priv);
+	batadv_nc_mesh_free(bat_priv);
 	batadv_dat_free(bat_priv);
 	batadv_bla_free(bat_priv);
 
diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c
index a487d46..4ecc0b6 100644
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -35,6 +35,20 @@ static int batadv_nc_recv_coded_packet(struct sk_buff *skb,
 				       struct batadv_hard_iface *recv_if);
 
 /**
+ * batadv_nc_init - one-time initialization for network coding
+ */
+int __init batadv_nc_init(void)
+{
+	int ret;
+
+	/* Register our packet type */
+	ret = batadv_recv_handler_register(BATADV_CODED,
+					   batadv_nc_recv_coded_packet);
+
+	return ret;
+}
+
+/**
  * batadv_nc_start_timer - initialise the nc periodic worker
  * @bat_priv: the bat priv with all the soft interface information
  */
@@ -45,10 +59,10 @@ static void batadv_nc_start_timer(struct batadv_priv *bat_priv)
 }
 
 /**
- * batadv_nc_init - initialise coding hash table and start house keeping
+ * batadv_nc_mesh_init - initialise coding hash table and start house keeping
  * @bat_priv: the bat priv with all the soft interface information
  */
-int batadv_nc_init(struct batadv_priv *bat_priv)
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
 {
 	bat_priv->nc.timestamp_fwd_flush = jiffies;
 	bat_priv->nc.timestamp_sniffed_purge = jiffies;
@@ -70,11 +84,6 @@ int batadv_nc_init(struct batadv_priv *bat_priv)
 	batadv_hash_set_lock_class(bat_priv->nc.coding_hash,
 				   &batadv_nc_decoding_hash_lock_class_key);
 
-	/* Register our packet type */
-	if (batadv_recv_handler_register(BATADV_CODED,
-					 batadv_nc_recv_coded_packet) < 0)
-		goto err;
-
 	INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker);
 	batadv_nc_start_timer(bat_priv);
 
@@ -1721,12 +1730,11 @@ free_nc_packet:
 }
 
 /**
- * batadv_nc_free - clean up network coding memory
+ * batadv_nc_mesh_free - clean up network coding memory
  * @bat_priv: the bat priv with all the soft interface information
  */
-void batadv_nc_free(struct batadv_priv *bat_priv)
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
 {
-	batadv_recv_handler_unregister(BATADV_CODED);
 	cancel_delayed_work_sync(&bat_priv->nc.work);
 
 	batadv_nc_purge_paths(bat_priv, bat_priv->nc.coding_hash, NULL);
diff --git a/net/batman-adv/network-coding.h b/net/batman-adv/network-coding.h
index 85a4ec8..ddfa618 100644
--- a/net/batman-adv/network-coding.h
+++ b/net/batman-adv/network-coding.h
@@ -22,8 +22,9 @@
 
 #ifdef CONFIG_BATMAN_ADV_NC
 
-int batadv_nc_init(struct batadv_priv *bat_priv);
-void batadv_nc_free(struct batadv_priv *bat_priv);
+int batadv_nc_init(void);
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv);
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv);
 void batadv_nc_update_nc_node(struct batadv_priv *bat_priv,
 			      struct batadv_orig_node *orig_node,
 			      struct batadv_orig_node *orig_neigh_node,
@@ -46,12 +47,17 @@ int batadv_nc_init_debugfs(struct batadv_priv *bat_priv);
 
 #else /* ifdef CONFIG_BATMAN_ADV_NC */
 
-static inline int batadv_nc_init(struct batadv_priv *bat_priv)
+static inline int batadv_nc_init(void)
 {
 	return 0;
 }
 
-static inline void batadv_nc_free(struct batadv_priv *bat_priv)
+static inline int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
+{
+	return 0;
+}
+
+static inline void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
 {
 	return;
 }
-- 
1.8.1.5


WARNING: multiple messages have this Message-ID (diff)
From: Antonio Quartulli <antonio@meshcoding.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, b.a.t.m.a.n@lists.open-mesh.org,
	Matthias Schiffer <mschiffer@universe-factory.net>,
	Marek Lindner <mareklindner@neomailbox.ch>,
	Antonio Quartulli <antonio@meshcoding.com>
Subject: [PATCH] batman-adv: set up network coding packet handlers during module init
Date: Wed,  2 Oct 2013 22:03:21 +0200	[thread overview]
Message-ID: <1380744201-2074-2-git-send-email-antonio@meshcoding.com> (raw)
In-Reply-To: <1380744201-2074-1-git-send-email-antonio@meshcoding.com>

From: Matthias Schiffer <mschiffer@universe-factory.net>

batman-adv saves its table of packet handlers as a global state, so handlers
must be set up only once (and setting them up a second time will fail).

The recently-added network coding support tries to set up its handler each time
a new softif is registered, which obviously fails when more that one softif is
used (and in consequence, the softif creation fails).

Fix this by splitting up batadv_nc_init into batadv_nc_init (which is called
only once) and batadv_nc_mesh_init (which is called for each softif); in
addition batadv_nc_free is renamed to batadv_nc_mesh_free to keep naming
consistent.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
---
 net/batman-adv/main.c           |  5 +++--
 net/batman-adv/network-coding.c | 28 ++++++++++++++++++----------
 net/batman-adv/network-coding.h | 14 ++++++++++----
 3 files changed, 31 insertions(+), 16 deletions(-)

diff --git a/net/batman-adv/main.c b/net/batman-adv/main.c
index c72d1bc..1356af6 100644
--- a/net/batman-adv/main.c
+++ b/net/batman-adv/main.c
@@ -65,6 +65,7 @@ static int __init batadv_init(void)
 	batadv_recv_handler_init();
 
 	batadv_iv_init();
+	batadv_nc_init();
 
 	batadv_event_workqueue = create_singlethread_workqueue("bat_events");
 
@@ -142,7 +143,7 @@ int batadv_mesh_init(struct net_device *soft_iface)
 	if (ret < 0)
 		goto err;
 
-	ret = batadv_nc_init(bat_priv);
+	ret = batadv_nc_mesh_init(bat_priv);
 	if (ret < 0)
 		goto err;
 
@@ -167,7 +168,7 @@ void batadv_mesh_free(struct net_device *soft_iface)
 	batadv_vis_quit(bat_priv);
 
 	batadv_gw_node_purge(bat_priv);
-	batadv_nc_free(bat_priv);
+	batadv_nc_mesh_free(bat_priv);
 	batadv_dat_free(bat_priv);
 	batadv_bla_free(bat_priv);
 
diff --git a/net/batman-adv/network-coding.c b/net/batman-adv/network-coding.c
index a487d46..4ecc0b6 100644
--- a/net/batman-adv/network-coding.c
+++ b/net/batman-adv/network-coding.c
@@ -35,6 +35,20 @@ static int batadv_nc_recv_coded_packet(struct sk_buff *skb,
 				       struct batadv_hard_iface *recv_if);
 
 /**
+ * batadv_nc_init - one-time initialization for network coding
+ */
+int __init batadv_nc_init(void)
+{
+	int ret;
+
+	/* Register our packet type */
+	ret = batadv_recv_handler_register(BATADV_CODED,
+					   batadv_nc_recv_coded_packet);
+
+	return ret;
+}
+
+/**
  * batadv_nc_start_timer - initialise the nc periodic worker
  * @bat_priv: the bat priv with all the soft interface information
  */
@@ -45,10 +59,10 @@ static void batadv_nc_start_timer(struct batadv_priv *bat_priv)
 }
 
 /**
- * batadv_nc_init - initialise coding hash table and start house keeping
+ * batadv_nc_mesh_init - initialise coding hash table and start house keeping
  * @bat_priv: the bat priv with all the soft interface information
  */
-int batadv_nc_init(struct batadv_priv *bat_priv)
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
 {
 	bat_priv->nc.timestamp_fwd_flush = jiffies;
 	bat_priv->nc.timestamp_sniffed_purge = jiffies;
@@ -70,11 +84,6 @@ int batadv_nc_init(struct batadv_priv *bat_priv)
 	batadv_hash_set_lock_class(bat_priv->nc.coding_hash,
 				   &batadv_nc_decoding_hash_lock_class_key);
 
-	/* Register our packet type */
-	if (batadv_recv_handler_register(BATADV_CODED,
-					 batadv_nc_recv_coded_packet) < 0)
-		goto err;
-
 	INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker);
 	batadv_nc_start_timer(bat_priv);
 
@@ -1721,12 +1730,11 @@ free_nc_packet:
 }
 
 /**
- * batadv_nc_free - clean up network coding memory
+ * batadv_nc_mesh_free - clean up network coding memory
  * @bat_priv: the bat priv with all the soft interface information
  */
-void batadv_nc_free(struct batadv_priv *bat_priv)
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
 {
-	batadv_recv_handler_unregister(BATADV_CODED);
 	cancel_delayed_work_sync(&bat_priv->nc.work);
 
 	batadv_nc_purge_paths(bat_priv, bat_priv->nc.coding_hash, NULL);
diff --git a/net/batman-adv/network-coding.h b/net/batman-adv/network-coding.h
index 85a4ec8..ddfa618 100644
--- a/net/batman-adv/network-coding.h
+++ b/net/batman-adv/network-coding.h
@@ -22,8 +22,9 @@
 
 #ifdef CONFIG_BATMAN_ADV_NC
 
-int batadv_nc_init(struct batadv_priv *bat_priv);
-void batadv_nc_free(struct batadv_priv *bat_priv);
+int batadv_nc_init(void);
+int batadv_nc_mesh_init(struct batadv_priv *bat_priv);
+void batadv_nc_mesh_free(struct batadv_priv *bat_priv);
 void batadv_nc_update_nc_node(struct batadv_priv *bat_priv,
 			      struct batadv_orig_node *orig_node,
 			      struct batadv_orig_node *orig_neigh_node,
@@ -46,12 +47,17 @@ int batadv_nc_init_debugfs(struct batadv_priv *bat_priv);
 
 #else /* ifdef CONFIG_BATMAN_ADV_NC */
 
-static inline int batadv_nc_init(struct batadv_priv *bat_priv)
+static inline int batadv_nc_init(void)
 {
 	return 0;
 }
 
-static inline void batadv_nc_free(struct batadv_priv *bat_priv)
+static inline int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
+{
+	return 0;
+}
+
+static inline void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
 {
 	return;
 }
-- 
1.8.1.5

  reply	other threads:[~2013-10-02 20:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-02 20:03 [B.A.T.M.A.N.] pull request net: 2013-10-02 Antonio Quartulli
2013-10-02 20:03 ` Antonio Quartulli
2013-10-02 20:03 ` Antonio Quartulli [this message]
2013-10-02 20:03   ` [PATCH] batman-adv: set up network coding packet handlers during module init Antonio Quartulli
2013-10-02 20:15 ` [B.A.T.M.A.N.] pull request net: 2013-10-02 Antonio Quartulli
2013-10-02 20:15   ` Antonio Quartulli
2013-10-03 19:58 ` [B.A.T.M.A.N.] " David Miller
2013-10-03 19:58   ` David Miller
2013-10-03 20:14   ` [B.A.T.M.A.N.] " Antonio Quartulli
2013-10-03 20:14     ` Antonio Quartulli
2013-10-03 20:27     ` [B.A.T.M.A.N.] " David Miller
2013-10-03 20:27       ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1380744201-2074-2-git-send-email-antonio@meshcoding.com \
    --to=antonio@meshcoding.com \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=davem@davemloft.net \
    --cc=mareklindner@neomailbox.ch \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.