[PATCH 0/5] edac, highbank: Add Calxeda ECX-2000 support

[Robert Richter <rric@kernel.org>]

This patch series enables ECC edac support for Calxeda ECX-2000
(Midway). The ECX-2000 memory controller is similar to Highbank but
has different register bases for error and interrupt registers.

Testing the driver uncovered a bug in the interrupt initialization.
So there is also a fix for this for all the Highbank edac drivers. The
interrupt was enabled too early which caused a crash if there are
interrupts pending (ECC errors) during driver initialization.

Also some improvements and unification of edac log messages I found
useful.

-Robert


Rob Herring (1):
  ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

Robert Richter (4):
  edac, highbank: Fix interrupt setup of mem and l2 controller
  edac, highbank: Add Calxeda ECX-2000 support
  edac, highbank: Improve and unify naming
  edac: Unify reporting of device info for device, mc and pci

 .../devicetree/bindings/arm/calxeda/mem-ctrlr.txt  |   4 +-
 arch/arm/boot/dts/ecx-2000.dts                     |   6 +
 arch/arm/boot/dts/ecx-common.dtsi                  |   6 -
 arch/arm/boot/dts/highbank.dts                     |   6 +
 drivers/edac/edac_device.c                         |   9 +-
 drivers/edac/edac_mc.c                             |   6 +-
 drivers/edac/edac_pci.c                            |   8 +-
 drivers/edac/highbank_l2_edac.c                    |  33 +++---
 drivers/edac/highbank_mc_edac.c                    | 128 +++++++++++++--------
 9 files changed, 127 insertions(+), 79 deletions(-)

-- 
1.8.4.rc3