From: Robert Richter <rric@kernel.org>
To: linux-edac@vger.kernel.org
Cc: Rob Herring <rob.herring@calxeda.com>,
linux-kernel@vger.kernel.org,
Robert Richter <robert.richter@linaro.org>,
Robert Richter <rric@kernel.org>
Subject: [PATCH 2/5] ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi
Date: Wed, 16 Oct 2013 12:59:35 +0200 [thread overview]
Message-ID: <1381921178-28511-3-git-send-email-rric@kernel.org> (raw)
In-Reply-To: <1381921178-28511-1-git-send-email-rric@kernel.org>
From: Rob Herring <rob.herring@calxeda.com>
The DDR controller is slightly different in ECX-2000 and ECX-1000, so we
need to have different nodes for each platform.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[Device Tree documentation updated.]
Signed-off-by: Robert Richter <rric@kernel.org>
---
Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt | 4 +++-
arch/arm/boot/dts/ecx-2000.dts | 6 ++++++
arch/arm/boot/dts/ecx-common.dtsi | 6 ------
arch/arm/boot/dts/highbank.dts | 6 ++++++
4 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
index f770ac0..0496759 100644
--- a/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
+++ b/Documentation/devicetree/bindings/arm/calxeda/mem-ctrlr.txt
@@ -1,7 +1,9 @@
Calxeda DDR memory controller
Properties:
-- compatible : Should be "calxeda,hb-ddr-ctrl"
+- compatible : Should be:
+ - "calxeda,hb-ddr-ctrl" for ECX-1000
+ - "calxeda,ecx-2000-ddr-ctrl" for ECX-2000
- reg : Address and size for DDR controller registers.
- interrupts : Interrupt for DDR controller.
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 139b40c..2ccbb57f 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -85,6 +85,12 @@
<1 10 0xf08>;
};
+ memory-controller@fff00000 {
+ compatible = "calxeda,ecx-2000-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
+
intc: interrupt-controller@fff11000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index e8559b7..f95988f 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -45,12 +45,6 @@
status = "disabled";
};
- memory-controller@fff00000 {
- compatible = "calxeda,hb-ddr-ctrl";
- reg = <0xfff00000 0x1000>;
- interrupts = <0 91 4>;
- };
-
ipc@fff20000 {
compatible = "arm,pl320", "arm,primecell";
reg = <0xfff20000 0x1000>;
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index 6aad34a..ed14aea 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -86,6 +86,12 @@
soc {
ranges = <0x00000000 0x00000000 0xffffffff>;
+ memory-controller@fff00000 {
+ compatible = "calxeda,hb-ddr-ctrl";
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 91 4>;
+ };
+
timer@fff10600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xfff10600 0x20>;
--
1.8.4.rc3
next prev parent reply other threads:[~2013-10-16 11:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 10:59 [PATCH 0/5] edac, highbank: Add Calxeda ECX-2000 support Robert Richter
2013-10-16 10:59 ` [PATCH 1/5] edac, highbank: Fix interrupt setup of mem and l2 controller Robert Richter
2013-10-16 10:59 ` Robert Richter [this message]
2013-10-16 10:59 ` [PATCH 3/5] edac, highbank: Add Calxeda ECX-2000 support Robert Richter
2013-10-16 10:59 ` [PATCH 4/5] edac, highbank: Improve and unify naming Robert Richter
2013-10-16 10:59 ` [PATCH 5/5] edac: Unify reporting of device info for device, mc and pci Robert Richter
2013-10-29 13:17 ` Borislav Petkov
2013-10-28 22:06 ` [PATCH 0/5] edac, highbank: Add Calxeda ECX-2000 support Rob Herring
2013-10-29 20:01 ` Robert Richter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381921178-28511-3-git-send-email-rric@kernel.org \
--to=rric@kernel.org \
--cc=linux-edac@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rob.herring@calxeda.com \
--cc=robert.richter@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.