From: Junio C Hamano <gitster@pobox.com>
To: git@vger.kernel.org
Cc: Jeff King <peff@peff.net>
Subject: [PATCH 2/3] t1005: reindent
Date: Fri, 1 Nov 2013 15:44:54 -0700 [thread overview]
Message-ID: <1383345895-23341-3-git-send-email-gitster@pobox.com> (raw)
In-Reply-To: <1383345895-23341-1-git-send-email-gitster@pobox.com>
Just to update the style of this ancient test script to match
our house style.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
t/lib-read-tree.sh | 52 +++++++++----------
t/t1005-read-tree-reset.sh | 126 ++++++++++++++++++++++-----------------------
2 files changed, 89 insertions(+), 89 deletions(-)
diff --git a/t/lib-read-tree.sh b/t/lib-read-tree.sh
index abc2c6f..ef079af 100644
--- a/t/lib-read-tree.sh
+++ b/t/lib-read-tree.sh
@@ -5,39 +5,39 @@
# write the index and that together with -u it doesn't touch the work tree.
#
read_tree_must_succeed () {
- git ls-files -s >pre-dry-run &&
- git read-tree -n "$@" &&
- git ls-files -s >post-dry-run &&
- test_cmp pre-dry-run post-dry-run &&
- git read-tree "$@"
+ git ls-files -s >pre-dry-run &&
+ git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ test_cmp pre-dry-run post-dry-run &&
+ git read-tree "$@"
}
read_tree_must_fail () {
- git ls-files -s >pre-dry-run &&
- test_must_fail git read-tree -n "$@" &&
- git ls-files -s >post-dry-run &&
- test_cmp pre-dry-run post-dry-run &&
- test_must_fail git read-tree "$@"
+ git ls-files -s >pre-dry-run &&
+ test_must_fail git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ test_cmp pre-dry-run post-dry-run &&
+ test_must_fail git read-tree "$@"
}
read_tree_u_must_succeed () {
- git ls-files -s >pre-dry-run &&
- git diff-files -p >pre-dry-run-wt &&
- git read-tree -n "$@" &&
- git ls-files -s >post-dry-run &&
- git diff-files -p >post-dry-run-wt &&
- test_cmp pre-dry-run post-dry-run &&
- test_cmp pre-dry-run-wt post-dry-run-wt &&
- git read-tree "$@"
+ git ls-files -s >pre-dry-run &&
+ git diff-files -p >pre-dry-run-wt &&
+ git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ git diff-files -p >post-dry-run-wt &&
+ test_cmp pre-dry-run post-dry-run &&
+ test_cmp pre-dry-run-wt post-dry-run-wt &&
+ git read-tree "$@"
}
read_tree_u_must_fail () {
- git ls-files -s >pre-dry-run &&
- git diff-files -p >pre-dry-run-wt &&
- test_must_fail git read-tree -n "$@" &&
- git ls-files -s >post-dry-run &&
- git diff-files -p >post-dry-run-wt &&
- test_cmp pre-dry-run post-dry-run &&
- test_cmp pre-dry-run-wt post-dry-run-wt &&
- test_must_fail git read-tree "$@"
+ git ls-files -s >pre-dry-run &&
+ git diff-files -p >pre-dry-run-wt &&
+ test_must_fail git read-tree -n "$@" &&
+ git ls-files -s >post-dry-run &&
+ git diff-files -p >post-dry-run-wt &&
+ test_cmp pre-dry-run post-dry-run &&
+ test_cmp pre-dry-run-wt post-dry-run-wt &&
+ test_must_fail git read-tree "$@"
}
diff --git a/t/t1005-read-tree-reset.sh b/t/t1005-read-tree-reset.sh
index f53de79..e29cf63 100755
--- a/t/t1005-read-tree-reset.sh
+++ b/t/t1005-read-tree-reset.sh
@@ -8,84 +8,84 @@ test_description='read-tree -u --reset'
# two-tree test
test_expect_success 'setup' '
- git init &&
- mkdir df &&
- echo content >df/file &&
- git add df/file &&
- git commit -m one &&
- git ls-files >expect &&
- rm -rf df &&
- echo content >df &&
- git add df &&
- echo content >new &&
- git add new &&
- git commit -m two
+ git init &&
+ mkdir df &&
+ echo content >df/file &&
+ git add df/file &&
+ git commit -m one &&
+ git ls-files >expect &&
+ rm -rf df &&
+ echo content >df &&
+ git add df &&
+ echo content >new &&
+ git add new &&
+ git commit -m two
'
test_expect_success 'reset should work' '
- read_tree_u_must_succeed -u --reset HEAD^ &&
- git ls-files >actual &&
- test_cmp expect actual
+ read_tree_u_must_succeed -u --reset HEAD^ &&
+ git ls-files >actual &&
+ test_cmp expect actual
'
test_expect_success 'reset should remove remnants from a failed merge' '
- read_tree_u_must_succeed --reset -u HEAD &&
- git ls-files -s >expect &&
- sha1=$(git rev-parse :new) &&
- (
- echo "100644 $sha1 1 old"
- echo "100644 $sha1 3 old"
- ) | git update-index --index-info &&
- >old &&
- git ls-files -s &&
- read_tree_u_must_succeed --reset -u HEAD &&
- git ls-files -s >actual &&
- ! test -f old
+ read_tree_u_must_succeed --reset -u HEAD &&
+ git ls-files -s >expect &&
+ sha1=$(git rev-parse :new) &&
+ (
+ echo "100644 $sha1 1 old"
+ echo "100644 $sha1 3 old"
+ ) | git update-index --index-info &&
+ >old &&
+ git ls-files -s &&
+ read_tree_u_must_succeed --reset -u HEAD &&
+ git ls-files -s >actual &&
+ ! test -f old
'
test_expect_success 'Porcelain reset should remove remnants too' '
- read_tree_u_must_succeed --reset -u HEAD &&
- git ls-files -s >expect &&
- sha1=$(git rev-parse :new) &&
- (
- echo "100644 $sha1 1 old"
- echo "100644 $sha1 3 old"
- ) | git update-index --index-info &&
- >old &&
- git ls-files -s &&
- git reset --hard &&
- git ls-files -s >actual &&
- ! test -f old
+ read_tree_u_must_succeed --reset -u HEAD &&
+ git ls-files -s >expect &&
+ sha1=$(git rev-parse :new) &&
+ (
+ echo "100644 $sha1 1 old"
+ echo "100644 $sha1 3 old"
+ ) | git update-index --index-info &&
+ >old &&
+ git ls-files -s &&
+ git reset --hard &&
+ git ls-files -s >actual &&
+ ! test -f old
'
test_expect_success 'Porcelain checkout -f should remove remnants too' '
- read_tree_u_must_succeed --reset -u HEAD &&
- git ls-files -s >expect &&
- sha1=$(git rev-parse :new) &&
- (
- echo "100644 $sha1 1 old"
- echo "100644 $sha1 3 old"
- ) | git update-index --index-info &&
- >old &&
- git ls-files -s &&
- git checkout -f &&
- git ls-files -s >actual &&
- ! test -f old
+ read_tree_u_must_succeed --reset -u HEAD &&
+ git ls-files -s >expect &&
+ sha1=$(git rev-parse :new) &&
+ (
+ echo "100644 $sha1 1 old"
+ echo "100644 $sha1 3 old"
+ ) | git update-index --index-info &&
+ >old &&
+ git ls-files -s &&
+ git checkout -f &&
+ git ls-files -s >actual &&
+ ! test -f old
'
test_expect_success 'Porcelain checkout -f HEAD should remove remnants too' '
- read_tree_u_must_succeed --reset -u HEAD &&
- git ls-files -s >expect &&
- sha1=$(git rev-parse :new) &&
- (
- echo "100644 $sha1 1 old"
- echo "100644 $sha1 3 old"
- ) | git update-index --index-info &&
- >old &&
- git ls-files -s &&
- git checkout -f HEAD &&
- git ls-files -s >actual &&
- ! test -f old
+ read_tree_u_must_succeed --reset -u HEAD &&
+ git ls-files -s >expect &&
+ sha1=$(git rev-parse :new) &&
+ (
+ echo "100644 $sha1 1 old"
+ echo "100644 $sha1 3 old"
+ ) | git update-index --index-info &&
+ >old &&
+ git ls-files -s &&
+ git checkout -f HEAD &&
+ git ls-files -s >actual &&
+ ! test -f old
'
test_done
--
1.8.5-rc0-281-g8951339
next prev parent reply other threads:[~2013-11-01 22:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-29 2:36 [PATCH v4] remote-curl: fix large pushes with GSSAPI brian m. carlson
2013-10-30 8:45 ` Jeff King
2013-10-30 22:40 ` brian m. carlson
2013-10-31 6:34 ` Jeff King
2013-10-31 6:35 ` [PATCH 1/3] http: return curl's AUTHAVAIL via slot_results Jeff King
2013-10-31 6:36 ` [PATCH 2/3] remote-curl: pass curl slot_results back through run_slot Jeff King
2013-10-31 17:11 ` [BUG?] "error: cache entry has null sha1" Junio C Hamano
2013-10-31 17:15 ` Jeff King
2013-10-31 17:21 ` Jeff King
2013-10-31 18:07 ` Junio C Hamano
2013-11-01 22:44 ` Re* " Junio C Hamano
2013-11-01 22:44 ` [PATCH 1/3] unpack-trees: fix "read-tree -u --reset A B" with conflicted index Junio C Hamano
2013-11-01 22:44 ` Junio C Hamano [this message]
2013-11-01 22:44 ` [PATCH 3/3] t1005: add test for "read-tree --reset -u A B" Junio C Hamano
2013-11-03 8:03 ` Re* [BUG?] "error: cache entry has null sha1" Jeff King
2013-10-31 6:36 ` [PATCH 3/3] remote-curl: fix large pushes with GSSAPI Jeff King
2013-10-31 22:49 ` brian m. carlson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1383345895-23341-3-git-send-email-gitster@pobox.com \
--to=gitster@pobox.com \
--cc=git@vger.kernel.org \
--cc=peff@peff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.