From: Fabio Estevam <festevam@gmail.com>
To: computersforpeace@gmail.com
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
b32955@freescale.com, linux-mtd@lists.infradead.org,
stable@vger.kernel.org
Subject: [PATCH v2] mtd: gpmi: Fix NULL pointer dereference
Date: Mon, 11 Nov 2013 17:13:41 -0200 [thread overview]
Message-ID: <1384197222-23783-1-git-send-email-festevam@gmail.com> (raw)
From: Fabio Estevam <fabio.estevam@freescale.com>
Currently mx23_check_transcription_stamp() uses chip->buffers->databuf
as its buffer, which is allocated by nand_scan_tail().
Since commit 720e7ce5 ("mtd: gpmi: remove the nand_scan()"),
mx23_check_transcription_stamp() is called before nand_scan_tail(), which causes
a NULL pointer dereference:
[ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8
[ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0
[ 1.170000] pgd = c0004000
[ 1.170000] [000005d0] *pgd=00000000
[ 1.180000] Internal error: Oops: 5 [#1] ARM
[ 1.180000] Modules linked in:
[ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 #89
[ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000
[ 1.180000] PC is at memcmp+0x10/0x54
[ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894
[ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053
[ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff
[ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000
[ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800
[ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0
[ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel
[ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017
[ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0)
In order to fix this problem, allocate the buffer locally via kzalloc().
Also, as mx23_check_transcription_stamp() can return en error code now, adapt
the logic in mx23_boot_init() to take this into account.
Cc: <stable@vger.kernel.org> # 3.12
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- Drop sizeof(*buffer) from size calculatio in kzalloc (Brian Norris)
- Propagate the error if mx23_check_transcription_stamp returns a negative
error code (Brian Norris)
drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index a9830ff..f99b876 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -1342,7 +1342,7 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
unsigned int search_area_size_in_strides;
unsigned int stride;
unsigned int page;
- uint8_t *buffer = chip->buffers->databuf;
+ uint8_t *buffer;
int saved_chip_number;
int found_an_ncb_fingerprint = false;
@@ -1352,6 +1352,9 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
saved_chip_number = this->current_chip;
chip->select_chip(mtd, 0);
+ buffer = kzalloc(strlen(fingerprint), GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
/*
* Loop through the first search area, looking for the NCB fingerprint.
*/
@@ -1380,6 +1383,8 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
chip->select_chip(mtd, saved_chip_number);
+ kfree(buffer);
+
if (found_an_ncb_fingerprint)
dev_dbg(dev, "\tFound a fingerprint\n");
else
@@ -1488,7 +1493,11 @@ static int mx23_boot_init(struct gpmi_nand_data *this)
* transcription stamp. If we find it, then we don't have to do
* anything -- the block marks are already transcribed.
*/
- if (mx23_check_transcription_stamp(this))
+
+ ret = mx23_check_transcription_stamp(this);
+ if (ret < 0)
+ return ret;
+ else if (ret)
return 0;
/*
--
1.8.1.2
next reply other threads:[~2013-11-11 19:14 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-11 19:13 Fabio Estevam [this message]
2013-11-11 19:27 ` [PATCH v2] mtd: gpmi: Fix NULL pointer dereference Brian Norris
2013-11-12 2:31 ` Huang Shijie
2013-11-12 2:47 ` Brian Norris
2013-11-12 2:51 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384197222-23783-1-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=b32955@freescale.com \
--cc=computersforpeace@gmail.com \
--cc=fabio.estevam@freescale.com \
--cc=linux-mtd@lists.infradead.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.