All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@ingics.com>
To: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] regulator: lp3972: Convert to devm_regulator_register
Date: Wed, 13 Nov 2013 14:55:14 +0800	[thread overview]
Message-ID: <1384325714.7101.4.camel@phoenix> (raw)
In-Reply-To: <1384325546.7101.2.camel@phoenix>

Both num_regulators and **rdev are no longer required after this conversion,
thus remove them from struct lp3972.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
 drivers/regulator/lp3972.c | 41 ++++++-----------------------------------
 1 file changed, 6 insertions(+), 35 deletions(-)

diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c
index 093e6f4..aea485a 100644
--- a/drivers/regulator/lp3972.c
+++ b/drivers/regulator/lp3972.c
@@ -22,8 +22,6 @@ struct lp3972 {
 	struct device *dev;
 	struct mutex io_lock;
 	struct i2c_client *i2c;
-	int num_regulators;
-	struct regulator_dev **rdev;
 };
 
 /* LP3972 Control Registers */
@@ -478,41 +476,27 @@ static int setup_regulators(struct lp3972 *lp3972,
 {
 	int i, err;
 
-	lp3972->num_regulators = pdata->num_regulators;
-	lp3972->rdev = kcalloc(pdata->num_regulators,
-				sizeof(struct regulator_dev *), GFP_KERNEL);
-	if (!lp3972->rdev) {
-		err = -ENOMEM;
-		goto err_nomem;
-	}
-
 	/* Instantiate the regulators */
 	for (i = 0; i < pdata->num_regulators; i++) {
 		struct lp3972_regulator_subdev *reg = &pdata->regulators[i];
 		struct regulator_config config = { };
+		struct regulator_dev *rdev;
 
 		config.dev = lp3972->dev;
 		config.init_data = reg->initdata;
 		config.driver_data = lp3972;
 
-		lp3972->rdev[i] = regulator_register(&regulators[reg->id],
-						     &config);
-		if (IS_ERR(lp3972->rdev[i])) {
-			err = PTR_ERR(lp3972->rdev[i]);
+		rdev = devm_regulator_register(lp3972->dev,
+					       &regulators[reg->id], &config);
+		if (IS_ERR(rdev)) {
+			err = PTR_ERR(rdev);
 			dev_err(lp3972->dev, "regulator init failed: %d\n",
 				err);
-			goto error;
+			return err;
 		}
 	}
 
 	return 0;
-error:
-	while (--i >= 0)
-		regulator_unregister(lp3972->rdev[i]);
-	kfree(lp3972->rdev);
-	lp3972->rdev = NULL;
-err_nomem:
-	return err;
 }
 
 static int lp3972_i2c_probe(struct i2c_client *i2c,
@@ -557,18 +541,6 @@ static int lp3972_i2c_probe(struct i2c_client *i2c,
 	return 0;
 }
 
-static int lp3972_i2c_remove(struct i2c_client *i2c)
-{
-	struct lp3972 *lp3972 = i2c_get_clientdata(i2c);
-	int i;
-
-	for (i = 0; i < lp3972->num_regulators; i++)
-		regulator_unregister(lp3972->rdev[i]);
-	kfree(lp3972->rdev);
-
-	return 0;
-}
-
 static const struct i2c_device_id lp3972_i2c_id[] = {
 	{ "lp3972", 0 },
 	{ }
@@ -581,7 +553,6 @@ static struct i2c_driver lp3972_i2c_driver = {
 		.owner = THIS_MODULE,
 	},
 	.probe    = lp3972_i2c_probe,
-	.remove   = lp3972_i2c_remove,
 	.id_table = lp3972_i2c_id,
 };
 
-- 
1.8.1.2




  reply	other threads:[~2013-11-13  6:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-13  6:52 [PATCH 1/2] regulator: lp3971: Convert to devm_regulator_register Axel Lin
2013-11-13  6:55 ` Axel Lin [this message]
2013-11-13 13:26   ` [PATCH 2/2] regulator: lp3972: " Mark Brown
2013-11-13 13:25 ` [PATCH 1/2] regulator: lp3971: " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384325714.7101.4.camel@phoenix \
    --to=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.