From: Mark Hatle <mark.hatle@windriver.com>
To: <openembedded-core@lists.openembedded.org>
Subject: [PATCH] syslinux: check for __i386__ and __x86_64__ instead of __SIZEOF_POINTER__
Date: Thu, 21 Nov 2013 13:26:01 -0600 [thread overview]
Message-ID: <1385061961-4697-2-git-send-email-mark.hatle@windriver.com> (raw)
In-Reply-To: <1385061961-4697-1-git-send-email-mark.hatle@windriver.com>
From: Lei Liu <lei.liu2@windriver.com>
(Note: this patch is being sent for Yocto Project compliance, I don't
believe it is generally applicable to oe-core as it's only needed on
older host systems.)
GCC version 4.2 and earlier does not define __SIZEOF_POINTER__.
Check for __i386__ and __x86_64__ instead to make the code compile with
old compiler.
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
---
.../syslinux/files/gcc-compatibility.patch | 491 +++++++++++++++++++++
meta/recipes-devtools/syslinux/syslinux_6.01.bb | 4 +-
2 files changed, 494 insertions(+), 1 deletion(-)
create mode 100644 meta/recipes-devtools/syslinux/files/gcc-compatibility.patch
diff --git a/meta/recipes-devtools/syslinux/files/gcc-compatibility.patch b/meta/recipes-devtools/syslinux/files/gcc-compatibility.patch
new file mode 100644
index 0000000..b291e29
--- /dev/null
+++ b/meta/recipes-devtools/syslinux/files/gcc-compatibility.patch
@@ -0,0 +1,491 @@
+Check for __i386__ and __x86_64__ instead of __SIZEOF_POINTER__
+
+Upstream-Status: Pending
+
+Signed-off-by: Lei Liu <lei.liu2@windriver.com>
+---
+ com32/include/bitsize/limits.h | 4 ++--
+ com32/include/bitsize/stddef.h | 4 ++--
+ com32/include/bitsize/stdint.h | 4 ++--
+ com32/include/bitsize/stdintconst.h | 4 ++--
+ com32/include/bitsize/stdintlimits.h | 4 ++--
+ com32/include/byteswap.h | 4 ++--
+ com32/include/setjmp.h | 4 ++--
+ com32/include/sys/bitops.h | 4 ++--
+ com32/include/sys/cpu.h | 4 ++--
+ com32/include/sys/module.h | 4 ++--
+ com32/lib/libgcc/__muldi3.S | 4 ++--
+ com32/lib/setjmp.S | 4 ++--
+ com32/lib/sys/farcall.c | 4 ++--
+ com32/lib/sys/x86_init_fpu.c | 12 ++++++------
+ com32/sysdump/cpuid.c | 4 ++--
+ core/call16.c | 4 ++--
+ core/lzo/enter.ash | 4 ++--
+ core/lzo/leave.ash | 4 ++--
+ dos/stdlib.h | 4 ++--
+ efi/main.c | 6 +++---
+ efi/wrapper.c | 4 ++--
+ memdisk/memdisk.h | 2 +-
+ memdisk/setup.c | 4 ++--
+ memdisk/start32.S | 4 ++--
+ memdump/code16.h | 2 +-
+ 25 files changed, 53 insertions(+), 53 deletions(-)
+
+diff --git a/com32/include/bitsize/limits.h b/com32/include/bitsize/limits.h
+index 7129c4a..407c720 100644
+--- a/com32/include/bitsize/limits.h
++++ b/com32/include/bitsize/limits.h
+@@ -5,9 +5,9 @@
+ #ifndef _BITSIZE_LIMITS_H
+ #define _BITSIZE_LIMITS_H
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <bitsize32/limits.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <bitsize64/limits.h>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/include/bitsize/stddef.h b/com32/include/bitsize/stddef.h
+index 04418a0..bbf070b 100644
+--- a/com32/include/bitsize/stddef.h
++++ b/com32/include/bitsize/stddef.h
+@@ -5,9 +5,9 @@
+ #ifndef _BITSIZE_STDDEF_H
+ #define _BITSIZE_STDDEF_H
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <bitsize32/stddef.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <bitsize64/stddef.h>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/include/bitsize/stdint.h b/com32/include/bitsize/stdint.h
+index 7e7b235..500a53b 100644
+--- a/com32/include/bitsize/stdint.h
++++ b/com32/include/bitsize/stdint.h
+@@ -13,9 +13,9 @@ typedef unsigned char uint8_t;
+ typedef unsigned short int uint16_t;
+ typedef unsigned int uint32_t;
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <bitsize32/stdint.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <bitsize64/stdint.h>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/include/bitsize/stdintconst.h b/com32/include/bitsize/stdintconst.h
+index b2f3141..7caf937 100644
+--- a/com32/include/bitsize/stdintconst.h
++++ b/com32/include/bitsize/stdintconst.h
+@@ -5,9 +5,9 @@
+ #ifndef _BITSIZE_STDINTCONST_H
+ #define _BITSIZE_STDINTCONST_H
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <bitsize32/stdintconst.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <bitsize64/stdintconst.h>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/include/bitsize/stdintlimits.h b/com32/include/bitsize/stdintlimits.h
+index c342c44..78f1e89 100644
+--- a/com32/include/bitsize/stdintlimits.h
++++ b/com32/include/bitsize/stdintlimits.h
+@@ -5,9 +5,9 @@
+ #ifndef _BITSIZE_STDINTLIMITS_H
+ #define _BITSIZE_STDINTLIMITS_H
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <bitsize32/stdintlimits.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <bitsize64/stdintlimits.h>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/include/byteswap.h b/com32/include/byteswap.h
+index d1a4d54..ddfa030 100644
+--- a/com32/include/byteswap.h
++++ b/com32/include/byteswap.h
+@@ -26,10 +26,10 @@ static inline __constfunc uint16_t __bswap_16(uint16_t v)
+
+ static inline __constfunc uint32_t __bswap_32(uint32_t v)
+ {
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ asm("xchgb %h0,%b0 ; roll $16,%0 ; xchgb %h0,%b0"
+ : "+q" (v));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ asm("bswap %0"
+ : "=r" (v)
+ : "0" (v));
+diff --git a/com32/include/setjmp.h b/com32/include/setjmp.h
+index e709095..c514378 100644
+--- a/com32/include/setjmp.h
++++ b/com32/include/setjmp.h
+@@ -9,9 +9,9 @@
+ #include <klibc/compiler.h>
+ #include <stddef.h>
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <klibc/i386/archsetjmp.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <klibc/x86_64/archsetjmp.h>
+ #else
+ #error "unsupported architecture"
+diff --git a/com32/include/sys/bitops.h b/com32/include/sys/bitops.h
+index de30d93..95a7cf5 100644
+--- a/com32/include/sys/bitops.h
++++ b/com32/include/sys/bitops.h
+@@ -36,9 +36,9 @@
+
+ #include <klibc/compiler.h>
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <i386/bitops.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64)
+ #include <x86_64/bitops.h>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/include/sys/cpu.h b/com32/include/sys/cpu.h
+index 76c45da..edc97ec 100644
+--- a/com32/include/sys/cpu.h
++++ b/com32/include/sys/cpu.h
+@@ -5,9 +5,9 @@
+ #include <stdint.h>
+ #include <klibc/compiler.h>
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <i386/cpu.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <x86_64/cpu.h>
+ #else
+ #error "unsupported architecture"
+diff --git a/com32/include/sys/module.h b/com32/include/sys/module.h
+index c1d4253..39836b9 100644
+--- a/com32/include/sys/module.h
++++ b/com32/include/sys/module.h
+@@ -14,9 +14,9 @@
+ #include <stdbool.h>
+ #include <linux/list.h>
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <i386/module.h>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <x86_64/module.h>
+ #else
+ #error "unsupported architecture"
+diff --git a/com32/lib/libgcc/__muldi3.S b/com32/lib/libgcc/__muldi3.S
+index 424787c..107f0b8 100644
+--- a/com32/lib/libgcc/__muldi3.S
++++ b/com32/lib/libgcc/__muldi3.S
+@@ -9,7 +9,7 @@
+ .globl __muldi3
+ .type __muldi3,@function
+ __muldi3:
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ /* i386 */
+ push %esi
+ #ifndef REGPARM
+@@ -33,7 +33,7 @@ __muldi3:
+ #endif
+ pop %esi
+ ret
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ /* x86_64 */
+ push %rsi
+ #ifndef REGPARM
+diff --git a/com32/lib/setjmp.S b/com32/lib/setjmp.S
+index 2fb5c23..4abc685 100644
+--- a/com32/lib/setjmp.S
++++ b/com32/lib/setjmp.S
+@@ -62,9 +62,9 @@ longjmp:
+
+ .size longjmp,.-longjmp
+ */
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <i386/setjmp.S>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <x86_64/setjmp.S>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/lib/sys/farcall.c b/com32/lib/sys/farcall.c
+index 2749083..b5d6ad4 100644
+--- a/com32/lib/sys/farcall.c
++++ b/com32/lib/sys/farcall.c
+@@ -8,10 +8,10 @@ static inline uint32_t eflags(void)
+ {
+ //uint32_t v;
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ uint32_t v;
+ asm volatile("pushfl ; popl %0" : "=rm" (v));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ uint64_t v;
+ asm volatile("pushfq ; pop %0" : "=rm" (v));
+ #else
+diff --git a/com32/lib/sys/x86_init_fpu.c b/com32/lib/sys/x86_init_fpu.c
+index cacb4ea..b7b8d94 100644
+--- a/com32/lib/sys/x86_init_fpu.c
++++ b/com32/lib/sys/x86_init_fpu.c
+@@ -4,9 +4,9 @@
+ * Test for an x86 FPU, and do any necessary setup.
+ */
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #include <i386/x86_init_fpu.c>
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #include <x86_64/x86_init_fpu.c>
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+@@ -17,10 +17,10 @@
+
+ static inline uint64_t get_cr0(void)
+ {
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ uint32_t v;
+ asm("movl %%cr0,%0":"=r"(v));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ uint64_t v;
+ asm("movq %%cr0,%0":"=r"(v));
+ #else
+@@ -31,9 +31,9 @@ asm("movq %%cr0,%0":"=r"(v));
+
+ static inline void set_cr0(uint32_t v)
+ {
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ asm volatile ("movl %0,%%cr0"::"r" (v));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ asm volatile ("movq %0,%%cr0"::"r" ((uint64_t)v));
+ #else
+ #error "Unable to build for to-be-defined architecture type"
+diff --git a/com32/sysdump/cpuid.c b/com32/sysdump/cpuid.c
+index 846b540..67d0844 100644
+--- a/com32/sysdump/cpuid.c
++++ b/com32/sysdump/cpuid.c
+@@ -20,12 +20,12 @@ struct cpuid_info {
+
+ static void get_cpuid(uint32_t eax, uint32_t ecx, struct cpuid_data *data)
+ {
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ asm("pushl %%ebx ; cpuid ; movl %%ebx,%1 ; popl %%ebx"
+ : "=a" (data->eax), "=r" (data->ebx),
+ "=c" (data->ecx), "=d" (data->edx)
+ : "a" (eax), "c" (ecx));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ asm volatile("push %%rbx; cpuid; movl %%ebx, %1; pop %%rbx"
+ : "=a" (data->eax),
+ "=b" (data->ebx),
+diff --git a/core/call16.c b/core/call16.c
+index 471aef9..6cee2d5 100644
+--- a/core/call16.c
++++ b/core/call16.c
+@@ -26,10 +26,10 @@ static inline uint32_t eflags(void)
+ {
+ //uint32_t v;
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ uint32_t v;
+ asm volatile("pushfl ; popl %0" : "=rm" (v));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ uint64_t v;
+ asm volatile("pushfq ; pop %0" : "=rm" (v));
+ #else
+diff --git a/core/lzo/enter.ash b/core/lzo/enter.ash
+index dc7782f..a2aefa5 100644
+--- a/core/lzo/enter.ash
++++ b/core/lzo/enter.ash
+@@ -45,14 +45,14 @@
+ //
+ ************************************************************************/
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ pushl %ebp
+ pushl %edi
+ pushl %esi
+ pushl %ebx
+ pushl %ecx
+ pushl %edx
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ push %rbp
+ push %rdi
+ push %rsi
+diff --git a/core/lzo/leave.ash b/core/lzo/leave.ash
+index cc48ce6..0b9555a 100644
+--- a/core/lzo/leave.ash
++++ b/core/lzo/leave.ash
+@@ -65,14 +65,14 @@
+
+ negl %eax
+ addl $12,%esp
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ popl %edx
+ popl %ecx
+ popl %ebx
+ popl %esi
+ popl %edi
+ popl %ebp
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ pop %rdx
+ pop %rcx
+ pop %rbx
+diff --git a/dos/stdlib.h b/dos/stdlib.h
+index d982670..9e6a80a 100644
+--- a/dos/stdlib.h
++++ b/dos/stdlib.h
+@@ -3,9 +3,9 @@
+
+ typedef int ssize_t;
+ /* size_t is defined elsewhere */
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ typedef unsigned int size_t;
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ typedef unsigned long size_t;
+ #else
+ #error "unsupported architecture"
+diff --git a/efi/main.c b/efi/main.c
+index 13b9403..adad340 100644
+--- a/efi/main.c
++++ b/efi/main.c
+@@ -417,7 +417,7 @@ struct boot_params {
+ * allocate_pool()/free_pool()
+ * memory_map()
+ */
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #define EFI_LOAD_SIG "EL32"
+ static inline void kernel_jump(EFI_PHYSICAL_ADDRESS kernel_start,
+ struct boot_params *boot_params)
+@@ -446,7 +446,7 @@ static inline void handover_jump(EFI_HANDLE image, struct boot_params *bp,
+ "m" (image), "m" (kernel_start));
+ #endif
+ }
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ #define EFI_LOAD_SIG "EL64"
+ typedef void(*kernel_func)(void *, struct boot_params *);
+ typedef void(*handover_func)(void *, EFI_SYSTEM_TABLE *, struct boot_params *);
+@@ -906,7 +906,7 @@ int efi_boot_linux(void *kernel_buf, size_t kernel_size,
+ * protocol.
+ */
+ /* Allocate gdt consistent with the alignment for architecture */
+- status = emalloc(gdt.limit, __SIZEOF_POINTER__ , (EFI_PHYSICAL_ADDRESS *)&gdt.base);
++ status = emalloc(gdt.limit, sizeof(void *), (EFI_PHYSICAL_ADDRESS *)&gdt.base);
+ if (status != EFI_SUCCESS) {
+ printf("Failed to allocate memory for GDT, bailing out\n");
+ goto free_map;
+diff --git a/efi/wrapper.c b/efi/wrapper.c
+index 04c895f..90dae22 100644
+--- a/efi/wrapper.c
++++ b/efi/wrapper.c
+@@ -24,10 +24,10 @@
+
+ #include "wrapper.h"
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ typedef Elf32_Ehdr Elf_Ehdr;
+ typedef Elf32_Addr Elf_Addr;
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ typedef Elf64_Ehdr Elf_Ehdr;
+ typedef Elf64_Addr Elf_Addr;
+ #else
+diff --git a/memdisk/memdisk.h b/memdisk/memdisk.h
+index 6da5aff..37fd798 100644
+--- a/memdisk/memdisk.h
++++ b/memdisk/memdisk.h
+@@ -25,7 +25,7 @@
+ #include <com32.h>
+
+ /* define it only for i386 */
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #define __cdecl __attribute__((cdecl,regparm(0)))
+ #endif
+
+diff --git a/memdisk/setup.c b/memdisk/setup.c
+index 72c6785..ee6a16a 100644
+--- a/memdisk/setup.c
++++ b/memdisk/setup.c
+@@ -671,9 +671,9 @@ static void relocate_rm_code(uint32_t newbase)
+ set_seg_base(gdt_base, 0x10, rm_args.rm_base);
+ set_seg_base(gdt_base, 0x18, rm_args.rm_base);
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ asm volatile ("lgdtl %0"::"m" (*(char *)gdt_base));
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ asm volatile ("lgdt %0"::"m" (*(char *)gdt_base));
+ #else
+ #error "unsupported architecture"
+diff --git a/memdisk/start32.S b/memdisk/start32.S
+index ecebe68..cef147b 100644
+--- a/memdisk/start32.S
++++ b/memdisk/start32.S
+@@ -62,9 +62,9 @@ _start:
+ addl $8, %edi
+ loop 1b
+
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ lidtl idt_ptr
+-#elif __SIZEOF_POINTER__ == 8
++#elif defined (__x86_64__)
+ lidt idt_ptr
+ #else
+ #error "unsupported architecture"
+diff --git a/memdump/code16.h b/memdump/code16.h
+index ebf5ff4..b60b680 100644
+--- a/memdump/code16.h
++++ b/memdump/code16.h
+@@ -1,5 +1,5 @@
+ /* Must be included first of all */
+-#if __SIZEOF_POINTER__ == 4
++#if defined (__i386__)
+ #ifdef __ASSEMBLY__
+ .code16
+ #else
+--
+1.7.4.1
+
diff --git a/meta/recipes-devtools/syslinux/syslinux_6.01.bb b/meta/recipes-devtools/syslinux/syslinux_6.01.bb
index 1c240de..f9d21ea 100644
--- a/meta/recipes-devtools/syslinux/syslinux_6.01.bb
+++ b/meta/recipes-devtools/syslinux/syslinux_6.01.bb
@@ -8,7 +8,9 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=0636e73ff0215e8d672dc4c32c317bb3 \
# ldlinux.* stuff for now, so skip mtools-native
DEPENDS = "nasm-native util-linux"
-SRC_URI = "${KERNELORG_MIRROR}/linux/utils/boot/syslinux/6.xx/syslinux-${PV}.tar.bz2"
+SRC_URI = "${KERNELORG_MIRROR}/linux/utils/boot/syslinux/6.xx/syslinux-${PV}.tar.bz2 \
+ file://gcc-compatibility.patch \
+ "
SRC_URI[md5sum] = "6945ee89e29119d459baed4937bbc534"
SRC_URI[sha256sum] = "83a04cf81e6a46b80ee5a321926eea095af3498b04317e3674b46c125c7a5b43"
--
1.8.1.2.545.g2f19ada
next prev parent reply other threads:[~2013-11-21 19:26 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-21 19:26 [PATCH] image-prelink.bbclass: use the pseudo env var PSEUDO_ALLOW_FSYNC for prelink Mark Hatle
2013-11-21 19:26 ` Mark Hatle [this message]
2013-11-22 13:51 ` [PATCH] syslinux: check for __i386__ and __x86_64__ instead of __SIZEOF_POINTER__ Otavio Salvador
2013-11-22 13:42 ` [PATCH] image-prelink.bbclass: use the pseudo env var PSEUDO_ALLOW_FSYNC for prelink Otavio Salvador
2013-11-22 13:47 ` Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1385061961-4697-2-git-send-email-mark.hatle@windriver.com \
--to=mark.hatle@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.