All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Hurley <peter@hurleysoftware.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>,
	linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org,
	Peter Hurley <peter@hurleysoftware.com>
Subject: [PATCH staging-next 3/4] staging/fwserial: Rename data profiling functions
Date: Fri, 22 Nov 2013 13:06:10 -0500	[thread overview]
Message-ID: <1385143571-3571-4-git-send-email-peter@hurleysoftware.com> (raw)
In-Reply-To: <1385143571-3571-1-git-send-email-peter@hurleysoftware.com>

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
---
 drivers/staging/fwserial/fwserial.c | 22 +++++++++++-----------
 drivers/staging/fwserial/fwserial.h |  4 ++--
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c
index cad9e3f..12bd002 100644
--- a/drivers/staging/fwserial/fwserial.c
+++ b/drivers/staging/fwserial/fwserial.c
@@ -136,14 +136,14 @@ static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
 
 #ifdef FWTTY_PROFILING
 
-static void profile_fifo_avail(struct fwtty_port *port, unsigned *stat)
+static void fwtty_profile_fifo(struct fwtty_port *port, unsigned *stat)
 {
 	spin_lock_bh(&port->lock);
-	profile_size_distrib(stat, dma_fifo_avail(&port->tx_fifo));
+	fwtty_profile_data(stat, dma_fifo_avail(&port->tx_fifo));
 	spin_unlock_bh(&port->lock);
 }
 
-static void dump_profile(struct seq_file *m, struct stats *stats)
+static void fwtty_dump_profile(struct seq_file *m, struct stats *stats)
 {
 	/* for each stat, print sum of 0 to 2^k, then individually */
 	int k = 4;
@@ -183,8 +183,8 @@ static void dump_profile(struct seq_file *m, struct stats *stats)
 }
 
 #else
-#define profile_fifo_avail(port, stat)
-#define dump_profile(m, stats)
+#define fwtty_profile_fifo(port, stat)
+#define fwtty_dump_profile(m, stats)
 #endif
 
 /*
@@ -550,7 +550,7 @@ static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
 	int err = 0;
 
 	fwtty_dbg(port, "%d\n", n);
-	profile_size_distrib(port->stats.reads, n);
+	fwtty_profile_data(port->stats.reads, n);
 
 	if (port->write_only) {
 		n = 0;
@@ -759,7 +759,7 @@ static int fwtty_tx(struct fwtty_port *port, bool drain)
 			if (n == -EAGAIN)
 				++port->stats.tx_stall;
 			else if (n == -ENODATA)
-				profile_size_distrib(port->stats.txns, 0);
+				fwtty_profile_data(port->stats.txns, 0);
 			else {
 				++port->stats.fifo_errs;
 				fwtty_err_ratelimited(port, "fifo err: %d\n",
@@ -768,7 +768,7 @@ static int fwtty_tx(struct fwtty_port *port, bool drain)
 			break;
 		}
 
-		profile_size_distrib(port->stats.txns, txn->dma_pended.len);
+		fwtty_profile_data(port->stats.txns, txn->dma_pended.len);
 
 		fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST,
 				     peer->fifo_addr, txn->dma_pended.data,
@@ -1115,7 +1115,7 @@ static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c)
 	int n, len;
 
 	fwtty_dbg(port, "%d\n", c);
-	profile_size_distrib(port->stats.writes, c);
+	fwtty_profile_data(port->stats.writes, c);
 
 	spin_lock_bh(&port->lock);
 	n = dma_fifo_in(&port->tx_fifo, buf, c);
@@ -1193,7 +1193,7 @@ static void fwtty_unthrottle(struct tty_struct *tty)
 
 	fwtty_dbg(port, "CRTSCTS: %d\n", (C_CRTSCTS(tty) != 0));
 
-	profile_fifo_avail(port, port->stats.unthrottle);
+	fwtty_profile_fifo(port, port->stats.unthrottle);
 
 	spin_lock_bh(&port->lock);
 	port->mctrl &= ~OOB_RX_THROTTLE;
@@ -1459,7 +1459,7 @@ static void fwtty_debugfs_show_port(struct seq_file *m, struct fwtty_port *port)
 		(*port->fwcon_ops->proc_show)(m, port->con_data);
 	}
 
-	dump_profile(m, &port->stats);
+	fwtty_dump_profile(m, &port->stats);
 }
 
 static void fwtty_debugfs_show_peer(struct seq_file *m, struct fwtty_peer *peer)
diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h
index 149b24d..eab85b4 100644
--- a/drivers/staging/fwserial/fwserial.h
+++ b/drivers/staging/fwserial/fwserial.h
@@ -22,14 +22,14 @@
 #ifdef FWTTY_PROFILING
 #define DISTRIBUTION_MAX_SIZE     8192
 #define DISTRIBUTION_MAX_INDEX    (ilog2(DISTRIBUTION_MAX_SIZE) + 1)
-static inline void profile_size_distrib(unsigned stat[], unsigned val)
+static inline void fwtty_profile_data(unsigned stat[], unsigned val)
 {
 	int n = (val) ? min(ilog2(val) + 1, DISTRIBUTION_MAX_INDEX) : 0;
 	++stat[n];
 }
 #else
 #define DISTRIBUTION_MAX_INDEX    0
-#define profile_size_distrib(st, n)
+#define fwtty_profile_data(st, n)
 #endif
 
 /* Parameters for both VIRT_CABLE_PLUG & VIRT_CABLE_PLUG_RSP mgmt codes */
-- 
1.8.1.2

  parent reply	other threads:[~2013-11-22 18:06 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-22 18:06 [PATCH staging-next 0/4] fwserial changes for 3.14 Peter Hurley
2013-11-22 18:06 ` [PATCH staging-next 1/4] staging/fwserial: Rip out rx buffering Peter Hurley
2013-11-22 18:06 ` [PATCH staging-next 2/4] staging/fwserial: Up the tty buffer limit to 128K Peter Hurley
2013-11-22 18:06 ` Peter Hurley [this message]
2013-11-22 18:06 ` [PATCH staging-next 4/4] staging/fwserial: Add Kconfig options for max ports Peter Hurley
2013-11-25 20:43 ` [PATCH staging-next 0/4] fwserial changes for 3.14 Greg Kroah-Hartman
2013-11-25 21:00   ` Peter Hurley
2013-11-25 21:24     ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385143571-3571-4-git-send-email-peter@hurleysoftware.com \
    --to=peter@hurleysoftware.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.