All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 07/19] drm/i915: add runtime put/get calls at the basic places
Date: Wed, 27 Nov 2013 18:20:34 -0200	[thread overview]
Message-ID: <1385583634-2648-1-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <20131125212119.GB31545@nuc-i3427.alporthouse.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

If I add code to enable runtime PM on my Haswell machine, start a
desktop environment, then enable runtime PM, these functions will
complain that they're trying to read/write registers while the
graphics card is suspended.

v2: - Simplify i915_gem_fault changes.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_gem.c            | 27 +++++++++++++++++++++------
 drivers/gpu/drm/i915/i915_gem_execbuffer.c |  6 ++++++
 drivers/gpu/drm/i915/i915_irq.c            |  6 ++++++
 3 files changed, 33 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 40d9dcf..430b875 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1380,6 +1380,8 @@ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 	int ret = 0;
 	bool write = !!(vmf->flags & FAULT_FLAG_WRITE);
 
+	intel_runtime_pm_get(dev_priv);
+
 	/* We don't use vmf->pgoff since that has the fake offset */
 	page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >>
 		PAGE_SHIFT;
@@ -1427,8 +1429,10 @@ out:
 		/* If this -EIO is due to a gpu hang, give the reset code a
 		 * chance to clean up the mess. Otherwise return the proper
 		 * SIGBUS. */
-		if (i915_terminally_wedged(&dev_priv->gpu_error))
-			return VM_FAULT_SIGBUS;
+		if (i915_terminally_wedged(&dev_priv->gpu_error)) {
+			ret = VM_FAULT_SIGBUS;
+			break;
+		}
 	case -EAGAIN:
 		/*
 		 * EAGAIN means the gpu is hung and we'll wait for the error
@@ -1443,15 +1447,22 @@ out:
 		 * EBUSY is ok: this just means that another thread
 		 * already did the job.
 		 */
-		return VM_FAULT_NOPAGE;
+		ret = VM_FAULT_NOPAGE;
+		break;
 	case -ENOMEM:
-		return VM_FAULT_OOM;
+		ret = VM_FAULT_OOM;
+		break;
 	case -ENOSPC:
-		return VM_FAULT_SIGBUS;
+		ret = VM_FAULT_SIGBUS;
+		break;
 	default:
 		WARN_ONCE(ret, "unhandled error in i915_gem_fault: %i\n", ret);
-		return VM_FAULT_SIGBUS;
+		ret = VM_FAULT_SIGBUS;
+		break;
 	}
+
+	intel_runtime_pm_put(dev_priv);
+	return ret;
 }
 
 /**
@@ -4165,6 +4176,8 @@ void i915_gem_free_object(struct drm_gem_object *gem_obj)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	struct i915_vma *vma, *next;
 
+	intel_runtime_pm_get(dev_priv);
+
 	trace_i915_gem_object_destroy(obj);
 
 	if (obj->phys_obj)
@@ -4209,6 +4222,8 @@ void i915_gem_free_object(struct drm_gem_object *gem_obj)
 
 	kfree(obj->bit_17);
 	i915_gem_object_free(obj);
+
+	intel_runtime_pm_put(dev_priv);
 }
 
 struct i915_vma *i915_gem_obj_to_vma(struct drm_i915_gem_object *obj,
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 3c90dd1..260c147 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -1095,6 +1095,8 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data,
 		}
 	}
 
+	intel_runtime_pm_get(dev_priv);
+
 	ret = i915_mutex_lock_interruptible(dev);
 	if (ret)
 		goto pre_mutex_err;
@@ -1229,6 +1231,10 @@ err:
 
 pre_mutex_err:
 	kfree(cliprects);
+
+	/* intel_gpu_busy should also get a ref, so it will free when the device
+	 * is really idle. */
+	intel_runtime_pm_put(dev_priv);
 	return ret;
 }
 
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 2715600..70c4cef 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2477,6 +2477,12 @@ static void i915_hangcheck_elapsed(unsigned long data)
 	if (!i915_enable_hangcheck)
 		return;
 
+	/* Just postpone in case we're completely idle... */
+	if (dev_priv->pm.suspended) {
+		i915_queue_hangcheck(dev);
+		return;
+	}
+
 	for_each_ring(ring, dev_priv, i) {
 		u32 seqno, acthd;
 		bool busy = true;
-- 
1.8.3.1

  reply	other threads:[~2013-11-27 20:20 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-21 15:47 [PATCH 00/19] Haswell runtime PM support + D3 Paulo Zanoni
2013-11-21 15:47 ` [PATCH 01/19] drm/i915: WARN if !HAS_PC8 when enabling/disabling PC8 Paulo Zanoni
2013-11-29 11:11   ` Rodrigo Vivi
2013-11-29 12:55     ` Paulo Zanoni
2013-11-29 13:31       ` Rodrigo Vivi
2013-11-21 15:47 ` [PATCH 02/19] drm/i915: use the correct force_wake function at the PC8 code Paulo Zanoni
2013-11-27 19:57   ` Paulo Zanoni
2013-11-29 11:14     ` [Intel-gfx] " Rodrigo Vivi
2013-11-29 13:23       ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 03/19] drm/i915: get a PC8 reference when enabling the power well Paulo Zanoni
2013-11-27 19:59   ` Paulo Zanoni
2013-11-29 12:35     ` Rodrigo Vivi
2013-11-29 13:34       ` Rodrigo Vivi
2013-12-10 21:29     ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 04/19] drm/i915: get/put PC8 when we get/put a CRTC Paulo Zanoni
2013-11-21 16:12   ` Chris Wilson
2013-11-27 20:01     ` Paulo Zanoni
2013-11-29 12:38       ` Rodrigo Vivi
2013-11-29 13:34         ` Rodrigo Vivi
2013-12-04  9:01   ` Daniel Vetter
2013-12-04 13:44     ` Paulo Zanoni
2013-12-04 14:07       ` Daniel Vetter
2013-12-05 13:43         ` Paulo Zanoni
2013-12-05 14:40           ` Daniel Vetter
2013-12-06 22:29             ` [PATCH] drm/i915: change CRTC assertion on LCPLL disable Paulo Zanoni
2013-12-06 22:37               ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 05/19] drm/i915: add initial Runtime PM functions Paulo Zanoni
2013-11-27 20:10   ` Paulo Zanoni
2013-11-29 12:54     ` Rodrigo Vivi
2013-11-29 13:33       ` Rodrigo Vivi
2013-11-29 14:05     ` Takashi Iwai
2013-12-06 22:31       ` Paulo Zanoni
2013-12-06 22:32         ` Paulo Zanoni
2013-12-08  9:06         ` Takashi Iwai
2013-12-02 12:23   ` Imre Deak
2013-11-21 15:47 ` [PATCH 06/19] drm/i915: do adapter power state notification at runtime PM Paulo Zanoni
2013-11-21 16:14   ` Chris Wilson
2013-11-27 20:13     ` Paulo Zanoni
2013-11-29 12:56       ` Rodrigo Vivi
2013-11-29 13:33         ` Rodrigo Vivi
2013-12-06 22:34         ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 07/19] drm/i915: add runtime put/get calls at the basic places Paulo Zanoni
2013-11-21 16:07   ` Chris Wilson
2013-11-25 20:55     ` Paulo Zanoni
2013-11-25 21:21       ` Chris Wilson
2013-11-27 20:20         ` Paulo Zanoni [this message]
2013-11-29 13:03           ` Rodrigo Vivi
2013-11-29 13:32             ` Rodrigo Vivi
2013-12-10 21:49             ` Daniel Vetter
2013-12-12 20:07               ` Paulo Zanoni
2013-12-12 20:54                 ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 08/19] drm/i915: add some runtime PM get/put calls Paulo Zanoni
2013-11-27 20:21   ` Paulo Zanoni
2013-11-29 13:05     ` Rodrigo Vivi
2013-11-29 13:31       ` Rodrigo Vivi
2013-11-29 13:42       ` Daniel Vetter
2013-11-29 13:56         ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 09/19] drm/i915: get a runtime PM reference when the panel VDD is on Paulo Zanoni
2013-11-29 13:50   ` Rodrigo Vivi
2013-11-29 13:59     ` Paulo Zanoni
2013-11-29 14:37       ` Rodrigo Vivi
2013-12-06 22:23         ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 10/19] drm/i915: do not assert DE_PCH_EVENT_IVB enabled Paulo Zanoni
2013-11-29 14:30   ` Rodrigo Vivi
2013-12-10 21:54   ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 11/19] drm/i915: disable interrupts when enabling PC8 Paulo Zanoni
2013-12-02 13:33   ` Rodrigo Vivi
2013-12-10 21:59   ` Daniel Vetter
2013-12-11 21:33     ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 12/19] drm/i915: release the GTT mmaps when going into D3 Paulo Zanoni
2013-11-21 16:02   ` Chris Wilson
2013-11-21 16:27     ` Paulo Zanoni
2013-12-10 22:03   ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 13/19] drm: do not steal the display if we have a master Paulo Zanoni
2013-11-21 16:04   ` Chris Wilson
2013-11-27 20:24     ` Paulo Zanoni
2013-11-29 13:37       ` Daniel Vetter
2013-11-30 11:19       ` David Herrmann
2013-11-21 15:47 ` [PATCH 14/19] drm/i915: add runtime PM support on Haswell Paulo Zanoni
2013-12-02 13:37   ` Rodrigo Vivi
2013-12-10 22:10     ` Daniel Vetter
2013-12-10 22:06   ` Daniel Vetter
2013-11-21 15:47 ` [PATCH 15/19] drm/i915: don't enable VDD just to enable the panel Paulo Zanoni
2013-11-29 14:40   ` Rodrigo Vivi
2013-11-21 15:47 ` [PATCH 16/19] drm/i915: don't touch the VDD when disabling " Paulo Zanoni
2013-11-29 14:41   ` Rodrigo Vivi
2013-11-21 15:47 ` [PATCH 17/19] drm/i915: fix VDD override off wait Paulo Zanoni
2013-11-21 15:47 ` [PATCH 18/19] drm/i915: save some time when waiting the eDP timings Paulo Zanoni
2013-11-21 16:00   ` Chris Wilson
2013-11-25 22:17     ` Ben Widawsky
2013-11-25 23:25       ` Chris Wilson
2013-11-26  2:38         ` Ben Widawsky
2013-11-26  9:14           ` Chris Wilson
2013-11-26 15:53             ` Paulo Zanoni
2013-11-21 15:47 ` [PATCH 19/19] drm/i915: init the DP panel power seq regs earlier Paulo Zanoni
2013-12-05 15:00   ` Jani Nikula
2013-12-06 18:39     ` Paulo Zanoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385583634-2648-1-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.