From: Dennis Gilmore <dennis@ausil.us>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 5/5] port beaglebones to use generic distro configs
Date: Thu, 5 Dec 2013 20:18:15 -0600 [thread overview]
Message-ID: <1386296295-28658-6-git-send-email-dennis@ausil.us> (raw)
In-Reply-To: <1386296295-28658-1-git-send-email-dennis@ausil.us>
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
---
include/configs/am335x_evm.h | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index d75df92..86623b1 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -56,11 +56,14 @@
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x80200000\0" \
- "fdtaddr=0x80F80000\0" \
+ "loadaddr=0x81000000\0" \
+ "pxefile_addr_r=0x81300000\0" \
+ "kernel_addr_r=0x81400000\0" \
+ "ramdisk_addr_r=0x83400000\0" \
+ "fdt_addr_r=0x81100000\0" \
+ "fdt_addr=0x81200000\0" \
"fdt_high=0xffffffff\0" \
"boot_fdt=try\0" \
- "rdaddr=0x81000000\0" \
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"bootfile=zImage\0" \
@@ -76,7 +79,7 @@
"nfsopts=nolock\0" \
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
"::off\0" \
- "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${ramdisk_addr_r},64M\0" \
"ramrootfstype=ext2\0" \
"mmcargs=setenv bootargs console=${console} " \
"${optargs} " \
@@ -105,13 +108,13 @@
"${optargs} " \
"root=${ramroot} " \
"rootfstype=${ramrootfstype}\0" \
- "loadramdisk=load mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loadramdisk=load mmc ${mmcdev} ${ramdisk_addr_r} ramdisk.gz\0" \
"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
- "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
+ "loadfdt=load mmc ${bootpart} ${fdt_addr_r} ${bootdir}/${fdtfile}\0" \
"mmcloados=run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdtaddr}; " \
+ "bootz ${loadaddr} - ${fdt_addr_r}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
@@ -146,12 +149,12 @@
"setenv autoload no; " \
"dhcp; " \
"tftp ${loadaddr} ${bootfile}; " \
- "tftp ${fdtaddr} ${fdtfile}; " \
+ "tftp ${fdt_addr_r} ${fdtfile}; " \
"run netargs; " \
- "bootz ${loadaddr} - ${fdtaddr}\0" \
+ "bootz ${loadaddr} - ${fdt_addr_r}\0" \
"ramboot=echo Booting from ramdisk ...; " \
"run ramargs; " \
- "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
+ "bootz ${loadaddr} ${ramdisk_addr_r} ${fdt_addr_r}\0" \
"findfdt="\
"if test $board_name = A335BONE; then " \
"setenv fdtfile am335x-bone.dtb; fi; " \
--
1.8.4.2
next prev parent reply other threads:[~2013-12-06 2:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 2:18 [U-Boot] [RFC] implementation of generic distro configs Dennis Gilmore
2013-12-06 2:18 ` [U-Boot] [PATCH 1/5] add a generic set of configs to enable Distros to more easier support u-boot based systems Dennis Gilmore
2013-12-06 10:53 ` Wolfgang Denk
2013-12-06 2:18 ` [U-Boot] [PATCH 2/5] port wandboards to use the generic distro configs Dennis Gilmore
2013-12-06 3:47 ` Robert Nelson
2013-12-06 5:01 ` Dennis Gilmore
2013-12-06 5:06 ` Dennis Gilmore
2013-12-06 5:13 ` Robert Nelson
2013-12-06 5:07 ` Robert Nelson
2013-12-06 10:59 ` Wolfgang Denk
2013-12-06 14:48 ` Dennis Gilmore
2013-12-06 15:26 ` Wolfgang Denk
2013-12-06 16:28 ` Tom Rini
2013-12-06 20:37 ` Wolfgang Denk
2013-12-06 22:13 ` Tom Rini
2013-12-06 22:59 ` Wolfgang Denk
2013-12-06 22:44 ` Dennis Gilmore
2013-12-06 23:16 ` Wolfgang Denk
2013-12-07 0:09 ` Dennis Gilmore
2013-12-07 12:20 ` Wolfgang Denk
2013-12-06 2:18 ` [U-Boot] [PATCH 3/5] port omap4 based devices to use " Dennis Gilmore
2013-12-06 2:18 ` [U-Boot] [PATCH 4/5] port beagleboard " Dennis Gilmore
2013-12-06 2:18 ` Dennis Gilmore [this message]
2013-12-06 3:31 ` [U-Boot] [PATCH 5/5] port beaglebones " Dennis Gilmore
2013-12-06 17:14 ` [U-Boot] [RFC] implementation of " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386296295-28658-6-git-send-email-dennis@ausil.us \
--to=dennis@ausil.us \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.