From: Gary Rookard <garyrookard@gmail.com>
To: gregkh@linuxfoundation.org
Cc: lisa@xenapiadmin.com, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
Gary Rookard <garyrookard@gmail.com>
Subject: [PATCH 1/9] Staging: bcm: DDRInit: Replaced spaces with tabs.
Date: Fri, 6 Dec 2013 23:33:08 -0500 [thread overview]
Message-ID: <1386390788-10996-1-git-send-email-garyrookard@gmail.com> (raw)
This is the first patch of a series.
Signed:off-by: Gary Alan Rookard <garyrookard@gmail.com>
---
On branch staging-next
drivers/staging/bcm/DDRInit.c | 398 +++++++++++++++++++++---------------------
1 file changed, 199 insertions(+), 199 deletions(-)
diff --git a/drivers/staging/bcm/DDRInit.c b/drivers/staging/bcm/DDRInit.c
index 9f7e30f..f550567 100644
--- a/drivers/staging/bcm/DDRInit.c
+++ b/drivers/staging/bcm/DDRInit.c
@@ -8,242 +8,242 @@
//DDR INIT-133Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 12 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting133MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007212},
+ {0x0f000820,0x07F13FFF},
+ {0x0f000810,0x00000F95},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a04C,0x0000000C},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x081b0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000010},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
+ {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x02000007},
+ {0x0F007028,0x02020202},
+ {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F007030,0x05000000},
+ {0x0F007034,0x00000003};
+ {0x0F007038,0x110a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
+ {0x0F00703C,0x02101010},//ROB - 0x02101010,//0x02101018},
+ {0x0F007040,0x45751200},//ROB - 0x45751200,//0x450f1200},
+ {0x0F007044,0x110a0d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007048,0x081b0306},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x0010246c},
+ {0x0F007064,0x00000010},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00007000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//80Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 10 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting80MHz[]= {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07f1ffff},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a000,0x00000016},
- {0x0F00a04C,0x0000000C},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07f1ffff},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a000,0x00000016},
+ {0x0F00a04C,0x0000000C},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01000000},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020000},
- {0x0F007020,0x04020107},
- {0x0F007024,0x00000007},
- {0x0F007028,0x02020201},
- {0x0F00702c,0x0204040a},
- {0x0F007030,0x04000000},
- {0x0F007034,0x00000002},
- {0x0F007038,0x1F060200},
- {0x0F00703C,0x1C22221F},
- {0x0F007040,0x8A006600},
- {0x0F007044,0x221a0800},
- {0x0F007048,0x02690204},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x000A15D6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00004000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
- {0x0F007094,0x00000104},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01000000},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020000},
+ {0x0F007020,0x04020107},
+ {0x0F007024,0x00000007},
+ {0x0F007028,0x02020201},
+ {0x0F00702c,0x0204040a},
+ {0x0F007030,0x04000000},
+ {0x0F007034,0x00000002},
+ {0x0F007038,0x1F060200},
+ {0x0F00703C,0x1C22221F},
+ {0x0F007040,0x8A006600},
+ {0x0F007044,0x221a0800},
+ {0x0F007048,0x02690204},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x000A15D6},
+ {0x0F007064,0x0000000A},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00004000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//100Mhz
#define T3_SKIP_CLOCK_PROGRAM_DUMP_100MHZ 13 //index for 0x0F007000
static struct bcm_ddr_setting asT3_DDRSetting100MHz[]= {// # DPLL Clock Setting
- {0x0F000800,0x00007008},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13E3F},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007008},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07F13E3F},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
//0x0f000840,0x0FFF1800,
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002},
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
- {0x0F00a04C,0x0000000C},
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
+ {0x0F00a04C,0x0000000C},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
- {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x00000007},
- {0x0F007028,0x01020201},
- {0x0F00702c,0x0204040A},
- {0x0F007030,0x06000000},
- {0x0F007034,0x00000004},
- {0x0F007038,0x20080200},
- {0x0F00703C,0x02030320},
- {0x0F007040,0x6E7F1200},
- {0x0F007044,0x01190A00},
- {0x0F007048,0x06120305},//0x02690204 // 0x06120305
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001C},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x00082ED6},
- {0x0F007064,0x0000000A},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00005000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001}, // POP - 0x00020000 Normal 0x01020000
+ {0x0F007020,0x04020107},//Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x00000007},
+ {0x0F007028,0x01020201},
+ {0x0F00702c,0x0204040A},
+ {0x0F007030,0x06000000},
+ {0x0F007034,0x00000004},
+ {0x0F007038,0x20080200},
+ {0x0F00703C,0x02030320},
+ {0x0F007040,0x6E7F1200},
+ {0x0F007044,0x01190A00},
+ {0x0F007048,0x06120305},//0x02690204 // 0x06120305
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001C},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x00082ED6},
+ {0x0F007064,0x0000000A},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00005000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000}
+ {0x0F007018,0x01010000}
};
//Net T3B DDR Settings
//DDR INIT-133Mhz
static struct bcm_ddr_setting asDPLL_266MHZ[] = {
- {0x0F000800,0x00007212},
- {0x0f000820,0x07F13FFF},
- {0x0f000810,0x00000F95},
- {0x0f000860,0x00000000},
- {0x0f000880,0x000003DD},
+ {0x0F000800,0x00007212},
+ {0x0f000820,0x07F13FFF},
+ {0x0f000810,0x00000F95},
+ {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000840,0x0FFF1B00},
- {0x0f000870,0x00000002}
+ {0x0f000840,0x0FFF1B00},
+ {0x0f000870,0x00000002}
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_133MHZ 11 //index for 0x0F007000
static struct bcm_ddr_setting asT3B_DDRSetting133MHz[] = {// # DPLL Clock Setting
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000810,0x00000F95},
- {0x0f000820,0x07F13652},
- {0x0f000840,0x0FFF0800},
+ {0x0f000810,0x00000F95},
+ {0x0f000810,0x00000F95},
+ {0x0f000810,0x00000F95},
+ {0x0f000820,0x07F13652},
+ {0x0f000840,0x0FFF0800},
// Changed source for X-bar and MIPS clock to APLL
- {0x0f000880,0x000003DD},
- {0x0f000860,0x00000000},
+ {0x0f000880,0x000003DD},
+ {0x0f000860,0x00000000},
// Changed source for X-bar and MIPS clock to APLL
- {0x0F00a044,0x1fffffff},
- {0x0F00a040,0x1f000000},
- {0x0F00a084,0x1Cffffff},
- {0x0F00a080,0x1C000000},
+ {0x0F00a044,0x1fffffff},
+ {0x0F00a040,0x1f000000},
+ {0x0F00a084,0x1Cffffff},
+ {0x0F00a080,0x1C000000},
//# Enable 2 ports within X-bar
- {0x0F00A000,0x00000016},
+ {0x0F00A000,0x00000016},
//Memcontroller Default values
- {0x0F007000,0x00010001},
- {0x0F007004,0x01010100},
- {0x0F007008,0x01000001},
- {0x0F00700c,0x00000000},
- {0x0F007010,0x01000000},
- {0x0F007014,0x01000100},
- {0x0F007018,0x01000000},
- {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
- {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
- {0x0F007024,0x02000007},
- {0x0F007028,0x02020202},
- {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
- {0x0F007030,0x05000000},
- {0x0F007034,0x00000003},
- {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
- {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
- {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
- {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
- {0x0F007048,0x040D0306},
- {0x0F00704c,0x00000000},
- {0x0F007050,0x0000001c},
- {0x0F007054,0x00000000},
- {0x0F007058,0x00000000},
- {0x0F00705c,0x00000000},
- {0x0F007060,0x0010246c},
- {0x0F007064,0x00000012},
- {0x0F007068,0x00000000},
- {0x0F00706c,0x00000001},
- {0x0F007070,0x00007000},
- {0x0F007074,0x00000000},
- {0x0F007078,0x00000000},
- {0x0F00707C,0x00000000},
- {0x0F007080,0x00000000},
- {0x0F007084,0x00000000},
+ {0x0F007000,0x00010001},
+ {0x0F007004,0x01010100},
+ {0x0F007008,0x01000001},
+ {0x0F00700c,0x00000000},
+ {0x0F007010,0x01000000},
+ {0x0F007014,0x01000100},
+ {0x0F007018,0x01000000},
+ {0x0F00701c,0x01020001},// POP - 0x00020001 Normal 0x01020001
+ {0x0F007020,0x04030107}, //Normal - 0x04030107 POP - 0x05030107
+ {0x0F007024,0x02000007},
+ {0x0F007028,0x02020202},
+ {0x0F00702c,0x0206060a},//ROB- 0x0205050a,//0x0206060a
+ {0x0F007030,0x05000000},
+ {0x0F007034,0x00000003},
+ {0x0F007038,0x130a0200},//ROB - 0x110a0200,//0x180a0200,// 0x1f0a0200
+ {0x0F00703C,0x02101012},//ROB - 0x02101010,//0x02101018},
+ {0x0F007040,0x457D1200},//ROB - 0x45751200,//0x450f1200},
+ {0x0F007044,0x11130d00},//ROB - 0x110a0d00//0x111f0d00
+ {0x0F007048,0x040D0306},
+ {0x0F00704c,0x00000000},
+ {0x0F007050,0x0000001c},
+ {0x0F007054,0x00000000},
+ {0x0F007058,0x00000000},
+ {0x0F00705c,0x00000000},
+ {0x0F007060,0x0010246c},
+ {0x0F007064,0x00000012},
+ {0x0F007068,0x00000000},
+ {0x0F00706c,0x00000001},
+ {0x0F007070,0x00007000},
+ {0x0F007074,0x00000000},
+ {0x0F007078,0x00000000},
+ {0x0F00707C,0x00000000},
+ {0x0F007080,0x00000000},
+ {0x0F007084,0x00000000},
//# Enable BW improvement within memory controller
- {0x0F007094,0x00000104},
+ {0x0F007094,0x00000104},
//# Enable start bit within memory controller
- {0x0F007018,0x01010000},
+ {0x0F007018,0x01010000},
};
#define T3B_SKIP_CLOCK_PROGRAM_DUMP_80MHZ 9 //index for 0x0F007000
--
1.8.4
next reply other threads:[~2013-12-07 4:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-07 4:33 Gary Rookard [this message]
2013-12-07 7:59 ` [PATCH 1/9] Staging: bcm: DDRInit: Replaced spaces with tabs Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386390788-10996-1-git-send-email-garyrookard@gmail.com \
--to=garyrookard@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lisa@xenapiadmin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.